Toyota 87931-AC010 Outer Rear View Mirror Sub Assembly, Right

You can Select Your Vehicle to check if 87931-AC010 fits your vehicle.

Electric rearview mirrors commonly utilize two motors for vertical and horizontal adjustments. The control switch directs voltage to the left or right mirror. With ignition ON and engine OFF, operate the mirror control switch for both mirrors while listening for motor sounds. If the motors sound but the glass doesn't move, there might be an internal drive mechanism issue requiring mirror disassembly. If no motor sound occurs, check the fuse. If the fuse is fine, assess the mirror control switch's continuity after removing it from the dashboard. Reconnect the switch and test for a faulty ground connection by attaching a jumper wire between the ground wire and the switch. If issues persist, remove the mirror and check its wires for voltage using the selector switch. If voltage isn't present, inspect the circuit for opens or shorts. If voltage is present, test the mirror off-vehicle using jumper wires; replace the mirror if it fails this test.

If the fuse is okay, the mirror control switch should be removed from the dashboard and its continuity checked by a dealership service department or other qualified automobile repair facility. Ground connections should also be tested.

Adhesive kits are available at auto parts stores to re-secure it. Follow the instructions included with the kit.

To install the mirror, reinsert the spring if it was removed earlier. Insert the mirror stalk's lug into the mount, pushing downward until the mirror is secured.