Toyota 87103-02050 Motor Sub-Assy, Blower W/Fan

You can Select Your Vehicle to check if 87103-02050 fits your vehicle.

To remove the blower unit, find it in the passenger compartment beneath the glove box area. If the blower is not working, first check the fuse and all connections in the circuit for any signs of loose or corroded material and ensure that the battery is fully charged. If it only works at high speed, inspect the blower motor resistor. it is found under the instrument panel on the passenger side. If the blower motor needs to be replaced, begin by disconnecting the wiring connector from the blower. Then, remove the three mounting screws and lower the blower assembly from the housing. The fan can be detached from the old blower motor and reused on the new one. For installation, simply follow the reverse order of the removal steps.

The blower unit in a vehicle is typically located in the passenger compartment under the glove box area. If the blower is not functioning properly, it is important to check the fuse and all connections in the circuit for looseness and corrosion, as well as ensuring that the battery is fully charged. If the blower motor operates at high speed but not at lower speeds, the issue is likely a faulty blower motor resistor, which can be found under the instrument panel on the passenger side. To replace the blower, disconnect the cable from the negative terminal of the battery, lower the PCM and its bracket, disconnect the wiring connector from the blower, remove the three mounting screws, and lower the blower assembly from the housing. The fan can be removed and reused on the new blower motor. Installation is the reverse of removal.