Toyota 87103-04040 Motor Sub-Assy, Blower W/Fan

You can Select Your Vehicle to check if 87103-04040 fits your vehicle.

To remove the blower motor, start by locating it under the dash, behind the glove box. Disconnect the blower motor electrical connector, then remove the three mounting screws. Lower the blower assembly from the housing and remove the spring clamp to separate the fan from the blower motor. For the resistor, it is situated on the blower duct under the dash. Directly access the resistor, disconnect its electrical connector, and remove the mounting screws. During installation, follow the reverse order of the removal process for both the blower motor and Blower Motor Resistor.