Toyota 04465-17100 Front Disc Brake Pad Set

You can Select Your Vehicle to check if 04465-17100 fits your vehicle.

Apply the handbrake, then jack up the front and rear of the car. Support it securely on axle stands. Remove the front roadwheels. The brake pad thickness, and the condition of the disc, can be assessed roughly with just the wheels removed. The thickness of the brake pads can be seen through the caliper window. For a comprehensive check, the brake pads should be removed and cleaned. The operation of the caliper can then also be checked, and the condition of the brake disc itself can be fully examined on both sides. On completion, refit the roadwheels and lower the car to the ground.

Check that the spacers slide easily in the caliper body bushes and are a reasonably tight fit. Brush dirt from the caliper and piston, inspect the dust seal for damage, and check the piston for fluid leaks, corrosion, or damage.

Chock the front wheels, then jack up the rear of the vehicle and support it on axle stands. Remove both rear roadwheels.

Remove the cap from the brake fluid reservoir.