Toyota 04465-17101 Front Disc Brake Pad Set

You can Select Your Vehicle to check if 04465-17101 fits your vehicle.

Follow these steps: 1. Spray the brake assembly with brake cleaner and allow it to drip dry. 2. Hold the caliper pin with a wrench while removing the mounting bolt. 3. Remove the caliper assembly from its bracket and hang it with a piece of coat hanger wire. 4. Remove the anti-rattle springs and the inner pad. 5. Disassemble each pad assembly and lay out the anti-squeal shims in order, then remove the outer pad. 6. Clean the inner anti-squeal shim before installing it. 7. Install the outer anti-squeal shim. 8. Clean and lubricate the caliper pins with brake grease, checking the rubber boots for damage. 9. Use a special tool or needle-nose pliers to retract the caliper pistons. 10. Install the pad supports in their original positions, then install the outer and inner pads. 11. Install the anti-rattle springs securely. 12. Remove the caliper from the wire hanger and install it onto its mounting bracket, tightening the caliper mounting bolts to the torque.