Toyota 31301-17030 Pedal Sub-Assy, Clutch

You can Select Your Vehicle to check if 31301-17030 fits your vehicle.

Press down lightly on the clutch pedal and, with a small steel ruler, measure the distance that it moves freely before the clutch resistance is felt. The free play should be within the specified limits. If it isn't, it must be adjusted. Remove the instrument finish lower panel and air duct. Loosen the lock nut on the pedal end of the clutch push rod. The clutch pedal must be adjusted for push rod play and pedal height - each of these adjustments is accomplished by loosening a locknut and turning a threaded adjuster. Turn the push rod until pedal free play and push rod free play are correct. Tighten the lock nut. After adjusting the pedal free play, check the pedal height. If pedal height is incorrect, loosen the lock nut and turn the stopper bolt until the height is correct. Tighten the lock nut. Install the air duct and instrument finish lower panel.