Toyota 23807-75020 Pipe Sub-Assy, Fuel Delivery

You can Select Your Vehicle to check if 23807-75020 fits your vehicle.

Clean and inspect the mounting surface of the lower intake manifold and the air intake plenum before positioning the new gasket. Install the assembly onto the intake manifold, ensuring the gasket remains in place, and tighten the bolts to the specified torque. Installation is otherwise the reverse of removal.

1. Detach the cable from the negative terminal of the battery. 2. Disconnect the electrical connectors at the ISC/IAC valve, TPS, and EGR/EVAP canister control solenoid. 3. Detach the accelerator cable and transmission linkage from the throttle body assembly. 4. Remove the EGA pipe from the EGA valve. 5. Label and detach the vacuum lines from the air intake plenum, EGA valve, and fuel pressure regulator. 6. Detach the PCV system by disconnecting the hose from the fitting on the air intake plenum. 7. Remove the plenum ground cable and bolt. 8. Detach the coolant hoses from the throttle body and plug them. 9. Remove the air intake plenum retaining bolts and nuts. 10. Remove the air intake plenum and throttle body as an assembly from the lower intake manifold.

Clean and inspect the mounting surface of the lower intake manifold and the air intake plenum before positioning the new gasket. Install the assembly onto the intake manifold, ensuring the gasket remains in place, and tighten the bolts to the specified torque. Installation is otherwise the reverse of removal.