Toyota 23220-16082 Fuel Pump Assembly

You can Select Your Vehicle to check if 23220-16082 fits your vehicle.

1. Remove the fuel tank and place it on a work bench. 2. Remove the fuel pump retaining screws. 3. Carefully withdraw the fuel pump/bracket assembly from the fuel tank. 4. Pull the lower end of the fuel pump loose from the bracket and remove the rubber cushion that insulates the bottom of the pump. 5. Remove the rubber cushion from the lower end of the fuel pump. 6. Remove the clip securing the filter to the pump. 7. Pull out the filter and inspect it for contamination. If it is dirty, replace it. 8. If you are only replacing the fuel pump filter, install the new filter, the clip, and the rubber cushion, push the lower end of the pump back into the bracket, and install the pump/bracket assembly in the fuel tank. 9. If you are replacing the fuel pump, loosen the hose clamp at the upper end of the pump and disconnect the pump from the hose. 10. Disconnect the wires from the pump terminals and remove the pump. 11. Installation is the reverse of removal.

Place the transaxle in Neutral (manual) or Park (automatic) and apply the parking brake.