Toyota 23221-62060 Fuel Pump Assembly

You can Select Your Vehicle to check if 23221-62060 fits your vehicle.

For 2007 RX 350 and all 2008 and later models, the components of the fuel pump assembly are modular and attached to the main housing. To remove the fuel level sending unit, disconnect the electrical connector and pry it from the clips. To remove the fuel pump, disconnect the electrical connector from the mounting flange, remove the spring E-clip, release the claw connectors from the sub-tank, separate the fuel suction support base, release the claw connectors and separate the fuel pump assembly, disconnect and remove the fuel pump electrical harness, and pull the fuel pump up and out from the filter assembly. Remove the O-ring and spacer from the fuel pump, and inspect the strainer for contamination.

The remainder of installation is the reverse of removal.

The initial steps to remove the fuel pump are relieving the fuel system pressure and disconnecting the battery.

The first step is to ensure that there is enough fuel in the tank.