Toyota 19102-16060 Rotor Sub-Assy, Distributor

You can Select Your Vehicle to check if 19102-16060 fits your vehicle.

Inspect spark plug wires when installing new plugs. If found, remove wires. After the engine cools, inspect the distributor cap as well as the rotor. Also, inspect each wire individually, marking its location. Disconnect from the distributor, check for corrosion, and replace. Buy a set for your engine model and replace one at a time. When installing a cap, move wires one at a time to prevent mix-ups.

Inspect spark plug wires when installing new plugs. Look for arcing or sparks in a dark, ventilated area with the engine running. After cooling, examine the distributor cap and rotor. Disconnect each wire from the spark plug, checking for corrosion, burns, or cracks, and ensure a tight fit. Inspect each wire at the distributor end for corrosion and fit. Replace any damaged wires with a pre-cut set for your engine model. Check the distributor cap for cracks and worn contacts, and the rotor for cracks. Replace if damaged. Measure resistance between wires and cap; replace if it exceeds the maximum value. When installing a new cap, transfer wires one at a time.