Toyota 90919-05100 Sensor, Crank POSITI

You can Select Your Vehicle to check if 90919-05100 fits your vehicle.

On 2GR-FKS models, raise the right side of the vehicle on jackstands, remove the left exhaust manifold, engine oil cooler hose bracket nut, and sensor shield bolts. Slide out the bracket from under the oil cooler hoses, disconnect the sensor's electrical connector, remove the sensor, and apply clean engine oil to the O-ring before reinstalling and tightening the retaining bolt securely. By following these steps, you can effectively access and work with the Crankshaft Position (CKP) sensors on both four-cylinder and V6 models.