Toyota 43420-07070 Shaft Assembly, Front Cv Axle, Left

You can Select Your Vehicle to check if 43420-07070 fits your vehicle.

No, not all of the steps in this procedure apply to all models. It is important to read through the procedure carefully and determine which steps apply to the vehicle being worked on before beginning any work.

The boots should be inspected periodically for damage and leaking lubricant. Torn CV joint boots must be replaced immediately to prevent damage to the joints. Boot replacement involves the removal of the driveaxle. Some auto parts stores carry "split" type replacement boots, which can be installed without removing the driveaxle from the vehicle. However, it is recommended to remove the driveaxle and disassemble the CV joint to clean it and ensure it is free from contaminants like moisture and dirt.

Read through the procedure carefully and determine which steps apply to the vehicle being worked on before actually beginning any work.

To check for wear in the CV joints and driveaxle shafts, grasp each axle (one at a time) and rotate it in both directions while holding the CV joint housings, feeling for play that indicates worn splines or sloppy CV joints. Additionally, check the driveaxle shafts for cracks, dents, and distortion.