Toyota 46590-33020 Shoe Assembly, Parking Brake, LH

You can Select Your Vehicle to check if 46590-33020 fits your vehicle.

Perform a brake booster check by starting the engine with the brake fully depressed and observing pedal movement. The pedal travel should remain consistent. Turn off the engine, hold the pedal for 30 seconds, and restart the engine to confirm decreased pedal travel with each subsequent application. Check the parking brake by counting clicks when engaging it with the handle or pedal. Adjust the parking brake if the click count deviates from the specified value. Alternatively, verify parking brake effectiveness on a steep hill in Neutral; if the vehicle rolls, perform parking brake adjustments.

With the assembly done, install the brake disc and use three wheel lug nuts to secure it. Remove the hole plug from the disc and adjust the parking brake shoe clearance using a tool or screwdriver until shoe-disc contact prevents disc turning. Back off the adjuster by eight notches, then replace the hole plug, ensuring the shoes don't drag on the disc. Install the caliper mounting bracket, followed by the brake caliper, and ensure that the bolts are properly tightened.