Toyota 48231-47100 Spring, Coil, Rear

You can Select Your Vehicle to check if 48231-47100 fits your vehicle.

1. Maneuver the assembly up into the fenderwell, install the lower mount onto the stud, and guide the upper mounting studs into the holes in the body. Install the bolt from below, tightening it. 2. Install the lower washer and nut. Raise the axle beam with the floor jack to simulate normal ride height, then tighten the nut. 3. Install the upper mounting nuts and tighten them. 4. The remainder of installation is the reverse of removal. 5. Install the wheel and lug nuts. Lower the vehicle and tighten the lug nuts.

After marking the positions, loosen the damper shaft nut with a socket and then remove the nut and suspension support (front) or nut and spring bracket (rear). Inspect the bearing in the suspension support for smooth operation and check the rubber portion for any signs of cracking or deterioration.