Toyota 84540-46010 Switch Assy, Neutral Start

You can Select Your Vehicle to check if 84540-46010 fits your vehicle.

To remove the manual lever retaining nut, you must also remove its lock plate. If equipped, bend the tabs flat on the lock plate before removing it.

1. Loosen the switch retaining bolts and rotate the switch until the flat on the shaft and the neutral basic line on the switch are aligned. 2. Detach the manual lever, then loosen the switch retaining bolts. The flat on the shaft and the pointer should align with the Neutral line on the switch when installing the switch. 3. Hold the switch in this position and tighten the bolts. 4. Note: The pointer on the sheet metal lock plate will indicate the alignment of the flat on the shaft with the Neutral line on the body of the switch.