Toyota 84340-22072 Switch Assy, Stop Lamp

You can Select Your Vehicle to check if 84340-22072 fits your vehicle.

The brake light switch is mounted on the top of brake pedal assembly by using a bracket and it switches 'ON' the back brake lights. Start with the removal of the negative terminal on the battery beginning with loosening the connection and excluding it from reaching the battery terminal. After that, remove the wiring connectors join to the brake light switch and unfixed the lock nut that encompasses the switch from the terminal depend on the pedal bracket and fix the new switch correspondingly. For adjustment, first, remove the lock nut, rotate the switch to make contact of the threaded portion with the pedal stopper lightly, and finally, fix the nut. Last but not least, join the wire at the switch and the battery terminals and with help verify that the rear brake light is operational.

Brake light switch is mounted at the tip of the brake pedal on a bracket and which engaged the rear brake light when depressed. To remove it first of all, you have to unbolt the ground cable, as well as the electrical connector, from the switch. Next, free the locknut and take off the switch from the pedal bracket, while the procedure of the reverse process will be the installment. For adjustment the users have to unlock the locknut, then set the switch to the desired clearance and lock it again. Finally attach the wires at the switch and at the battery, making sure that the brake lights work properly.