Toyota 81130-52300 Passenger Side Headlight Unit Assembly

You can Select Your Vehicle to check if 81130-52300 fits your vehicle.

1. Turn the steering wheel to give the best access to the front of the wheel arch. 2. Remove the three cross-head screws securing the front half of the wheel arch liner, and pull the liner back for access to the bulbholder. 3. Press the back of the wiring plug and pull it down to disconnect it. 4. Taking care not to damage the paintwork, prise the foglight front trim panel from the bumper using a small screwdriver. 5. Remove the mounting bolt at the back, then unclip and remove the light from the bumper. 6. Refitting is a reversal of removal.

The headlights can be finely adjusted by rotating the adjuster screws fitted to the rear of each light unit. The vertical adjustment screw is mounted at the outer end of the headlight, while the horizontal adjustment screw is mounted at the inner end of the headlight.