What should you do if the shocks or coil springs show signs of wear on 2003 through 2009 Toyota 4Runner?

If the shocks or coil springs show signs of wear such as leaking fluid, loss of damping capability, or physical damage like chips or cracks, consider all options before starting any work, as these components are not individually serviceable and must be replaced if issues arise. Complete assemblies may be available on an exchange basis, which can save time and effort, so check the cost and availability of parts prior to disassembling the vehicle. Begin by loosening the front wheel lug nuts, raising the vehicle securely on jackstands, and removing the front wheels. Next, detach the stabilizer bar while keeping the links connected to the steering knuckle. From underneath, remove the nut and bolt attaching the lower end of the shock absorber to the lower control arm, taking care not to damage the driveaxle on 4WD models. Then, remove the three nuts that attach the upper end of the shock to the frame bracket, ensuring not to touch the damper rod nut unless the spring is compressed. After that, take out the shock absorber/coil spring assembly, possibly needing to pry down on the lower control arm. Inspect the shock absorber and coil spring for any damage, and if either is worn, replace it. If installing new complete units, proceed accordingly; otherwise, secure the assembly in a bench vise, protecting the shock bodies, and install a spring compressor to relieve pressure from the spring seat. Remove the damper rod nut while holding the damper rod, then take off the components above the spring, noting their order. Set aside the compressed spring assembly in a safe location and inspect all rubber parts, washers, and suspension support for damage, replacing any that are compromised. Reassembly follows the reverse order of disassembly, ensuring the coil spring is seated correctly and the damper rod nut is tightened to the specified torque before releasing spring tension. Finally, installation is the reverse of removal, with all fasteners tightened to the appropriate torque, and the lug nuts also tightened accordingly.

Genuine Toyota 4Runner Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

133 Shock Absorbers found

View related parts
Toyota 4Runner Shock Absorber Assembly Rear Right
Part Number: 48530-80089
$366.56 MSRP: $539.56
You Save: $173.00 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: ABSORBER Assembly, Shock, Rear RH; Shock, Shock Absorber
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.7L | 1GRFE, 2UZFE; 1GRFE, 2UZFE; GRN210L-GKAGKA, GRN210L-GKAZKA, GRN210L-GKPGKA, GRN210L-GKPZKA, GRN215L-GKAGKA, GRN215L-GKAZKA, GRN215L-GKPGKA, GRN215L-GKPZKA, UZN210L-GKAGKA, UZN210L-GKAZKA, UZN215L-GKAGKA, UZN215L-GKAZKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Left
Part Number: 48520-80232
$284.77 MSRP: $408.66
You Save: $123.89 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock, Front Lh; Shock Absorber, Strut
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2022 Toyota 4Runner | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN285L-GKAGKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Right
Part Number: 48510-80499
$307.74 MSRP: $441.62
You Save: $133.88 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock, Front Rh; Shock Absorber, Strut
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2022 Toyota 4Runner | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN285L-GKAGKA
View related parts
Toyota 4Runner Shock Absorber Assembly Rear Left
Part Number: 48540-39445
$370.06 MSRP: $544.73
You Save: $174.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: ABSORBER Assembly, Shock, Rear LH; Shock Absorber
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.7L | 1GRFE, 2UZFE; 1GRFE, 2UZFE; GRN210L-GKAGKA, GRN210L-GKAZKA, GRN210L-GKPGKA, GRN210L-GKPZKA, GRN215L-GKAGKA, GRN215L-GKAZKA, GRN215L-GKPGKA, GRN215L-GKPZKA, UZN210L-GKAGKA, UZN210L-GKAZKA, UZN215L-GKAGKA, UZN215L-GKAZKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Right
Part Number: 48510-80500
$289.99 MSRP: $416.15
You Save: $126.16 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock, Front Rh; Shock Absorber, Strut
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2022 Toyota 4Runner | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN280L-GKAGKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Left
Part Number: 48510-39585
$170.49 MSRP: $242.99
You Save: $72.50 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Absorber Assy, Shock, Front Lh; Shock Absorber, Strut
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | LULI, SR5B, SR5V | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN180L-GKMSKA, RZN180L-GKPSKA, RZN185L-GKMSKA, RZN185L-GKPSKA, VZN180L-GKPGKA, VZN180L-GKPSKA, VZN180L-GKPZKA, VZN185L-GKMGKA, VZN185L-GKPGKA, VZN185L-GKPSKA, VZN185L-GKPZKA
View related parts
Toyota 4Runner Shock Absorber Assembly Rear Right
Part Number: 48530-80556
$72.68 MSRP: $102.44
You Save: $29.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock ; Absorber Assembly, Shock, Rear Rh; Shock, Shock Absorber
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2022 Toyota 4Runner | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN280L-GKAGKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Left
Part Number: 48510-80507
$140.86 MSRP: $200.25
You Save: $59.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock ; Absorber Assembly, Shock, Front Lh; Shock Absorber, Strut
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2022 Toyota 4Runner | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN285L-GKAGKA
View related parts
Toyota 4Runner Shock Absorber Assembly Rear Right
Part Number: 48530-80604
$46.28 MSRP: $64.69
You Save: $18.41 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock ; Absorber Assembly, Shock, Rear Rh; Shock, Shock Absorber
- Manufacturer Note: MARK 48530-35161
- Position: Rear Passenger Side
- Replaces: 48530-80541
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2022 Toyota 4Runner | 4 Cyl 2.7L, 6 Cyl 4.0L | 1GRFE, 2TRFE; 1GRFE, 1GRFE; GRN285L-GKAGKA, 2TRFE; GRN285L-GKAGKA, TRN285L-GKPGKA
View related parts
Toyota 4Runner Shock Absorber Assembly Rear Right
Part Number: 48530-80557
$72.68 MSRP: $102.44
You Save: $29.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock ; Absorber Assembly, Shock, Rear Rh; Shock, Shock Absorber
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2022 Toyota 4Runner | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN285L-GKAGKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Right
Part Number: 48510-80229
$224.20 MSRP: $321.98
You Save: $97.78 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assy, Shock, Front Rh; Shock Absorber
- Position: Front Passenger Side
- Replaces: 48510-80088
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.7L | 1GRFE, 2UZFE; 1GRFE, 2UZFE; GRN215L-GKAGKA, 2UZFE; UZN215L-GKAGKA, GRN215L-GKAZKA, GRN215L-GKPGKA, GRN215L-GKPZKA, UZN215L-GKAGKA, UZN215L-GKAZKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Right
Part Number: 48510-80230
$224.20 MSRP: $321.98
You Save: $97.78 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Absorber Assy, Shock, Front Rh; Shock Absorber, Strut
- Position: Front Passenger Side
- Replaces: 48510-80089
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.7L | 1GRFE, 2UZFE; 1GRFE, 2UZFE; GRN210L-GKAGKA, 2UZFE; UZN210L-GKAGKA, GRN210L-GKAZKA, GRN210L-GKPGKA, GRN210L-GKPZKA, UZN210L-GKAGKA, UZN210L-GKAZKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Left
Part Number: 48520-80233
$284.77 MSRP: $408.66
You Save: $123.89 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock, Front Lh; Shock Absorber, Strut
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2022 Toyota 4Runner | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN280L-GKAGKA
View related parts
Toyota 4Runner Shock Absorber Assembly Rear Left
Part Number: 48540-39855
$72.68 MSRP: $102.44
You Save: $29.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock ; Absorber Assembly, Shock, Rear Lh; Shock, Shock Absorber
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2022 Toyota 4Runner | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN280L-GKAGKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Left
Part Number: 48520-39885
$217.84 MSRP: $312.83
You Save: $94.99 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Absorber Assy, Shock, Front Lh; Shock Absorber, Strut
- Position: Front Driver Side
- Replaces: 48520-39535
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.7L | 1GRFE, 2UZFE; 1GRFE, 2UZFE; GRN210L-GKAGKA, 2UZFE; UZN210L-GKAGKA, GRN210L-GKAZKA, GRN210L-GKPGKA, GRN210L-GKPZKA, UZN210L-GKAGKA, UZN210L-GKAZKA
View related parts
Toyota 4Runner Shock Absorber Assembly Rear Left
Part Number: 48530-80372
$57.58 MSRP: $80.49
You Save: $22.91 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Set, Shock ; Absorber Assembly, Shock, Rear Lh; Shock, Shock Absorber
- Manufacturer Note: MARK 48530-35082
- Position: Rear Driver Side
- Replaces: 48530-80088, 48530-80300
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.7L | 1GRFE, 2UZFE; 1GRFE, 2UZFE; GRN215L-GKAGKA, GRN215L-GKAZKA, GRN215L-GKPGKA, GRN215L-GKPZKA, UZN215L-GKAGKA, UZN215L-GKAZKA
View related parts
Toyota 4Runner Shock Absorber Assembly Rear Right
Part Number: 48531-80692
$55.56 MSRP: $77.65
You Save: $22.09 (29%)
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock, Rear Rh; Shock, Shock Absorber
- Position: Rear Passenger Side
- Replaces: 48531-80559
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2002 Toyota 4Runner | LULI, SR5B, SR5V | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN180L-GKMSKA, RZN180L-GKPSKA, RZN185L-GKMSKA, RZN185L-GKPSKA, VZN180L-GKPGKA, VZN180L-GKPSKA, VZN180L-GKPZKA, VZN185L-GKMGKA, VZN185L-GKPGKA, VZN185L-GKPSKA, VZN185L-GKPZKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Left
Part Number: 48520-39875
$217.84 MSRP: $312.83
You Save: $94.99 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assy, Shock, Front Lh; Shock Absorber
- Position: Front Driver Side
- Replaces: 48520-39525
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2009 Toyota 4Runner | Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.7L | 1GRFE, 2UZFE; 1GRFE, 2UZFE; GRN215L-GKAGKA, 2UZFE; UZN215L-GKAGKA, GRN215L-GKAZKA, GRN215L-GKPGKA, GRN215L-GKPZKA, UZN215L-GKAGKA, UZN215L-GKAZKA
View related parts
Toyota 4Runner Shock Absorber Assembly Front Left
Part Number: 48510-39436
$174.29 MSRP: $247.99
You Save: $73.70 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Absorber Assembly, Shock, Front Lh; Shock Absorber, Strut
- Manufacturer Note: W(265/70R16 TIRE)
- Position: Front Driver Side
- Replaces: 48510-80012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-2000 Toyota 4Runner | LULI, SR5B, SR5V | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN185L-GKMSKA, RZN185L-GKPSKA, VZN185L-GKMGKA, VZN185L-GKPGKA, VZN185L-GKPZKA
View related parts
Toyota 4Runner Shock Absorber Assembly Rear Left
Part Number: 48540-39865
$72.68 MSRP: $102.44
You Save: $29.76 (30%)
Product Specifications
- Other Name: Absorber Set, Shock ; Absorber Assembly, Shock, Rear Lh; Shock, Shock Absorber
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2022 Toyota 4Runner | 6 Cyl 4.0L | 1GRFE; 1GRFE; GRN285L-GKAGKA

| Page 1 of 7 |Next >

1-20 of 133 Results

Toyota 4Runner Shock Absorber

If you are in demand for superior quality and affordable OEM Toyota 4Runner Shock Absorber, then shop with us! We own a wide range of the reduced-priced genuine Toyota 4Runner Shock Absorber. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota 4Runner Shock Absorber Parts Questions & Experts Answers

Shock Absorber Assembly Rear Left
48530-80371
Q: What should you do if the shocks or coil springs show signs of wear on 2003 through 2009 Toyota 4Runner?
A: If the shocks or coil springs show signs of wear such as leaking fluid, loss of damping capability, or physical damage like chips or cracks, consider all options before starting any work, as these components are not individually serviceable and must be replaced if issues arise. Complete assemblies may be available on an exchange basis, which can save time and effort, so check the cost and availability of parts prior to disassembling the vehicle. Begin by loosening the front wheel lug nuts, raising the vehicle securely on jackstands, and removing the front wheels. Next, detach the stabilizer bar while keeping the links connected to the steering knuckle. From underneath, remove the nut and bolt attaching the lower end of the shock absorber to the lower Control Arm, taking care not to damage the driveaxle on 4WD models. Then, remove the three nuts that attach the upper end of the shock to the frame bracket, ensuring not to touch the damper rod nut unless the spring is compressed. After that, take out the shock absorber/coil spring assembly, possibly needing to pry down on the lower control arm. Inspect the shock absorber and coil spring for any damage, and if either is worn, replace it. If installing new complete units, proceed accordingly; otherwise, secure the assembly in a bench vise, protecting the shock bodies, and install a spring compressor to relieve pressure from the spring seat. Remove the damper rod nut while holding the damper rod, then take off the components above the spring, noting their order. Set aside the compressed spring assembly in a safe location and inspect all rubber parts, washers, and suspension support for damage, replacing any that are compromised. Reassembly follows the reverse order of disassembly, ensuring the coil spring is seated correctly and the damper rod nut is tightened to the specified torque before releasing spring tension. Finally, installation is the reverse of removal, with all fasteners tightened to the appropriate torque, and the lug nuts also tightened accordingly.