How to remove and inspect of Clutch Disc and Pressure Plate on Toyota Corolla?

The clutch parts are usually accessed with the transaxle of the vehicle in place, although the engine remains a part of the car. In case of a major overhaul of the engine then the clutch should also be checked for signs of wear and expectedly repairing or replacing damaged parts is best done at this stage since parts of the clutch are relatively cheaper than the time it would take to access the clutch. The following procedures are based on assumed that the engine stays in the car. Start by sliding the release cylinder back and ensure it is out of the way but do not detach the hose. Subsequently, take out the transaxle from the car and make sure that the engine is effectively supported and maybe with an engine lift or support stand. If using a jack place a piece of wood between the jack and the oil pan and be careful as the oil pump pick up is towards the end of the pan and may distort the pan and lead to oil starvation. It is acceptable to leave the release fork and bearing connected to the transaxle for a while longer. For clamping support of the clutch disc, screw in a clutch alignment tool through the disc hub. Search the surface of the flywheel as well as the pressure plate for signs of indexing and in the absence of such signs, make them yourself once you are to reassemble the unit. Lose the pressure plate to the flywheel bolts diagonally, in order to ease the tension of the clutch spring, then take the bolts, then the pressure plate, as well as the clutch disc. While inspecting the engine components, examine the flywheel for presence of any crack or any defect on its surface and it should be corrected by resurfacing if there is any. For the clutch disc lining, see that they are worn by at most 1/32-inch above the rivet heads and appear for any damage. Products like the release bearing should be replaced together with the clutch disc. Check pressures of the pressure plate for signs of wear or damage, if worn replace the pressure plate. Several new shells about flywheel and pressure plate: Before the installation the machined surfaces of the flywheel and pressure plate have to be free of oil and grease. Insert the clutch disc on the flywheel with the help of an alignment tool and make sure that the pressure plate is installed in the correct manner. Now again tighten the pressure plate-to-flywheel bolts up to just 'snug' fit, align the clutch disc and then in a cross-hatch sequence tighten these bolts and finally use a torque wrench on them. In the inner groove of the release bearing as well as around the contact surfaces of the release lever and the input shaft bearing retainer apply HTL. The next step is to bolt in the clutch release bearing, the transaxle and the back in the components that were previously removed: everything must be tightened to the recommended torque.

Genuine Toyota Corolla Pressure Plate

Clutch Pressure Plate

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

46 Pressure Plates found

View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-33042
$194.88 MSRP: $279.44
You Save: $84.56 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch; Pressure Plate
- Replaces: 31210-33041, 31210-33040, 31210-28060
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Corolla | XRS | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE141L-DEMSKA, AZE141L-DEMSKK
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-02190
$129.52 MSRP: $184.13
You Save: $54.61 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch; Pressure Plate
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Corolla | S, STD | 4 Cyl 1.8L | 2ZRFE; 2ZRFE; ZRE172L-DEFDKA, ZRE172L-DEFDKK, ZRE172L-DEFSKA, ZRE172L-DEFSKK
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-12221
$65.56 MSRP: $92.59
You Save: $27.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-12221-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2005 Toyota Corolla | CE, LE, S, VE | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE110L-DEMDKA, ZZE110L-DEMDKK, ZZE110L-DEMNKA, ZZE110L-DEMRKA, ZZE110L-DEMRKK, ZZE110L-DEMSKA, ZZE110L-DEMSKK, ZZE130L-AEMDKA, ZZE130L-AEMNKA
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-12151
$65.35 MSRP: $92.28
You Save: $26.93 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-12152-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1996 Toyota Corolla | DX, LE | 4 Cyl 1.8L | 7AFE; 7AFE; AE102L-AEMNKA, AE102L-AEMNKK, AE102L-AWMNKA, AE102L-AWMNKK, AE102L-DEMEKA, AE102L-DEMNKA, AE102L-DEMNKK
- 1989-1991 Toyota Corolla | GTS | 4 Cyl 1.6L | 4AGE; 4AGE; AE92L-ACMVFA, AE92L-ACMVFK
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-02300
$142.37 MSRP: $202.40
You Save: $60.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch; Pressure Plate
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Corolla | CE, S, STD | 4 Cyl 1.8L | 2ZRFE; 2ZRFE; ZRE142L-DEMDKA, ZRE142L-DEMDKK, ZRE142L-DEMSKA, ZRE142L-DEMSKK
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-05042
$162.21 MSRP: $230.60
You Save: $68.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-05043
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2008 Toyota Corolla | CE, LE, S, STD, XR | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-20380
$142.37 MSRP: $202.40
You Save: $60.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-12291
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2006 Toyota Corolla | S, XRS | 4 Cyl 1.8L | 2ZZGE; 2ZZGE; ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE133L-DHFSFA, ZZE133L-DHFSFK
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-12210
$57.47 MSRP: $80.48
You Save: $23.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-12210-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-1992 Toyota Corolla | DX, LE, SR5, STD | 4 Cyl 1.6L | 4AFE; 4AFE; AE92L-ACMDKA, AE92L-ACMXKA, AE92L-ACMXKK, AE92L-AEMDKA, AE92L-AEMDKK, AE92L-AEMNKA, AE92L-AEMNKK, AE92L-AEMRKA, AE92L-AWMDKA, AE92L-AWMDKK, AE92L-DEMDKA, AE92L-DEMDKK, AE92L-DEMNKA, AE92L-DEMNKK, AE92L-DEMRKA
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-12201
$61.82 MSRP: $87.33
You Save: $25.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-12201-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1997 Toyota Corolla | DX, STD | 4 Cyl 1.6L | 4AFE; 4AFE; AE101L-AEMDKA, AE101L-AEMDKK, AE101L-AEMNKK, AE101L-DEMDKA, AE101L-DEMDKK, AE101L-DEMNKA, AE101L-DEMNKK
View related parts
Toyota Corolla Cover Assy, Clutch
Part Number: 31210-12390
$177.22 MSRP: $254.12
You Save: $76.90 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pressure Plate
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Corolla | 4 Cyl 2.0L | M20AFKS; M20AFKS; MZEA12L-AEFSBA, MZEA12L-AHFNBA, MZEA12L-AHFNBK, MZEA12L-DEFSBA, MZEA12L-DEFSBK
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-12080
$120.11 MSRP: $170.77
You Save: $50.66 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-20391
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1988 Toyota Corolla | GTS, Q | 4 Cyl 1.6L | 4AGEC, 4AGELC; 4AGEC, 4AGELC; AE82L-EGMQFA, AE82L-EGMVFA, AE86L-ECMQFA, AE86L-ECMQFK, AE86L-ESMQFA, AE86L-ESMQFK
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-12100
$146.98 MSRP: $208.95
You Save: $61.97 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-12182
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1986 Toyota Corolla | DX, LE, SR5 | 4 Cyl 1.6L | 4AC, 4ALC; 4AC, 4ALC; AE82L-EEMDCA, AE82L-EEMDCK, AE82L-EEMNCA, AE82L-ELMDCA, AE82L-ELMDCK, AE82L-ELMNCA, AE86L-ECMXCA, AE86L-ECMXCK, AE86L-ESMDCA, AE86L-ESMXCA, AE86L-ESMXCK
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-12251
$142.37 MSRP: $202.40
You Save: $60.03 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-12291
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2007 Toyota Corolla | S, XRS | 4 Cyl 1.8L | 2ZZGE; 2ZZGE; ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE133L-DHFSFA, ZZE133L-DHFSFK
View related parts
Toyota Corolla Cover Sub-Assy, Clutch
Part Number: 31201-29056
$188.94 MSRP: $270.93
You Save: $81.99 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 31201-19025, 31201-14020, 31201-29055, 31201-19026
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1975-1979 Toyota Corolla | DLX, Special, SR5, STD | 4 Cyl 1.6L | 2TC; 2TC; TE31L-KBA, TE31L-KBFA, TE31L-KDA, TE31L-KDFA, TE31L-KDFK, TE31L-KRK, TE31L-MBA, TE31L-MBFA, TE31L-MDA, TE31L-MDFA, TE37L-MQA, TE37L-MQK, TE38LV-KDFA, TE38LV-KDFK, TE38LV-MDFA, TE51L-CKDA, TE51L-CKDK, TE51L-CMDA, TE51L-CMQA, TE51L-CMQK, TE51L-LKDA, TE51L-LKDK, TE51L-LMDA, TE51L-LMQA, TE51L-LMQK
View related parts
Toyota Corolla Cover Sub-Assy, Clutch
Part Number: 31201-39047
$196.94 MSRP: $282.40
You Save: $85.46 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 31201-39045, 31201-39027, 31201-39046
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1980-1983 Toyota Corolla | STD | 4 Cyl 1.8L | 3TC; 3TC; TE72L-EDKRCA, TE72L-EEKRCA
View related parts
Toyota Corolla Cover Sub-Assy, Clutch
Part Number: 31201-19048
$30.90 MSRP: $43.65
You Save: $12.75 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 31201-19075
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1980-1982 Toyota Corolla | DX, SR5, STD | 4 Cyl 1.8L | 3TC; 3TC; TE72L-ECKDCA, TE72L-ECKDCK, TE72L-ECMDCA, TE72L-ECMDCK, TE72L-ECMXCA, TE72L-ECMXCK, TE72L-EDKDCA, TE72L-EDKDCK, TE72L-EDKRCA, TE72L-EDKRCK, TE72L-EDMDCA, TE72L-EDMDCK, TE72L-EEKDCA, TE72L-EEKDCK, TE72L-EEKRCA, TE72L-EEMDCA, TE72L-EEMDCK, TE72L-ELKDCA, TE72L-ELKDCK, TE72L-ELMDCA, TE72L-ELMDCK, TE72L-ELMXCA, TE72L-ELMXCK, TE72L-ESMDCA, TE72L-ESMXCA, TE72L-ESMXCK, TE72LG-EWKDCA, TE72LG-EWKDCK, TE72LG-EWMDCA, TE72LG-EWMDCK
View related parts
Toyota Corolla Plate, Clutch Pressure
Part Number: 31221-39045
$69.76 MSRP: $99.36
You Save: $29.60 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 31221-35020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1980-1983 Toyota Corolla | STD | 4 Cyl 1.8L | 3TC; 3TC; TE72L-EDKRCA, TE72L-EEKRCA
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-20200
$64.46 MSRP: $90.83
You Save: $26.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-16100-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1988 Toyota Corolla | D, DX, LE, SR5 | 4 Cyl 1.6L | 4AC, 4ALC; 4AC, 4ALC; AE82L-EEMDCA, AE82L-EEMDCK, AE82L-EEMNCA, AE82L-EGMDCA, AE82L-ELMDCA, AE82L-ELMDCK, AE86L-ECMXCA, AE86L-ESMDCA, AE86L-ESMXCA
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-16101
$57.47 MSRP: $80.48
You Save: $23.01 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-12210-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1990 Toyota Corolla | DX, LE, SR5, STD | 4 Cyl 1.6L | 4AF, 4AFE; 4AF, 4AFE; AE92L-ACMDKA, AE92L-ACMDUA, AE92L-ACMXKA, AE92L-ACMXKK, AE92L-ACMXUA, AE92L-ACMXUK, AE92L-AEMDKA, AE92L-AEMDKK, AE92L-AEMDUA, AE92L-AEMDUK, AE92L-AEMNKA, AE92L-AEMNKK, AE92L-AEMNUA, AE92L-AEMNUK, AE92L-AEMRKA, AE92L-AWMDKA, AE92L-AWMDKK, AE92L-AWMDUA, AE92L-AWMDUK, AE92L-DEMDKA, AE92L-DEMDKK, AE92L-DEMDUA, AE92L-DEMDUK, AE92L-DEMNKA, AE92L-DEMNKK, AE92L-DEMNUA, AE92L-DEMNUK, AE92L-DEMRKA
View related parts
Toyota Corolla Cover Assembly, Clutch
Part Number: 31210-12200
$61.82 MSRP: $87.33
You Save: $25.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover Assy, Clutch
- Replaced by: 31210-12201-84
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1996 Toyota Corolla | DX, STD | 4 Cyl 1.6L | 4AFE; 4AFE; AE101L-AEMDKA, AE101L-AEMDKK, AE101L-DEMDKA, AE101L-DEMDKK, AE101L-DEMNKA

| Page 1 of 3 |Next >

1-20 of 46 Results

Toyota Corolla Pressure Plate

If you are in demand for superior quality and affordable OEM Toyota Corolla Pressure Plate, then shop with us! We own a wide range of the reduced-priced genuine Toyota Corolla Pressure Plate. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Corolla Pressure Plate Parts Questions & Experts Answers

Cover Assembly, Clutch
31210-12221
Q: How to remove and inspect of Clutch Disc and Pressure Plate on Toyota Corolla?
A: The clutch parts are usually accessed with the transaxle of the vehicle in place, although the engine remains a part of the car. In case of a major overhaul of the engine then the clutch should also be checked for signs of wear and expectedly repairing or replacing damaged parts is best done at this stage since parts of the clutch are relatively cheaper than the time it would take to access the clutch. The following procedures are based on assumed that the engine stays in the car. Start by sliding the release cylinder back and ensure it is out of the way but do not detach the hose. Subsequently, take out the transaxle from the car and make sure that the engine is effectively supported and maybe with an engine lift or support stand. If using a jack place a piece of wood between the jack and the oil pan and be careful as the oil pump pick up is towards the end of the pan and may distort the pan and lead to oil starvation. It is acceptable to leave the release fork and bearing connected to the transaxle for a while longer. For clamping support of the clutch disc, screw in a clutch alignment tool through the disc hub. Search the surface of the flywheel as well as the pressure plate for signs of indexing and in the absence of such signs, make them yourself once you are to reassemble the unit. Lose the pressure plate to the flywheel bolts diagonally, in order to ease the tension of the clutch spring, then take the bolts, then the pressure plate, as well as the clutch disc. While inspecting the engine components, examine the flywheel for presence of any crack or any defect on its surface and it should be corrected by resurfacing if there is any. For the clutch disc lining, see that they are worn by at most 1/32-inch above the rivet heads and appear for any damage. Products like the Release Bearing should be replaced together with the clutch disc. Check pressures of the pressure plate for signs of wear or damage, if worn replace the pressure plate. Several new shells about flywheel and pressure plate: Before the installation the machined surfaces of the flywheel and pressure plate have to be free of oil and grease. Insert the clutch disc on the flywheel with the help of an alignment tool and make sure that the pressure plate is installed in the correct manner. Now again tighten the pressure plate-to-flywheel bolts up to just 'snug' fit, align the clutch disc and then in a cross-hatch sequence tighten these bolts and finally use a torque wrench on them. In the inner groove of the release bearing as well as around the contact surfaces of the release lever and the input shaft bearing retainer apply HTL. The next step is to bolt in the clutch release bearing, the transaxle and the back in the components that were previously removed: everything must be tightened to the recommended torque.