How to remove, inspect, and install Clutch Fork and Release Bearing on Toyota Corolla?

To remove the component, first disconnect the negative cable from the battery, then remove the transaxle. Next, detach the clutch fork from the ball stud by pulling on the retention spring, followed by the removal of the bearing and the fork. For inspection, hold the bearing by the outer race and rotate the inner race while applying pressure; it should turn smoothly, and if it doesn't or is noisy, replace the bearing/hub assembly. Wipe the bearing with a clean rag and check for damage, wear, and cracks, avoiding immersion in solvent as it is sealed for life. Also, inspect the fork for any cracks or bends. During installation, fill the inner groove of the release bearing with high-temperature grease and apply a light coat of the same grease to the transaxle input shaft splines and the front bearing retainer. Lubricate the fork ball socket, fork ends, and release cylinder pushrod socket with high-temperature grease. Attach the release bearing to the fork, ensuring proper engagement if a retaining clip is used. Slide the release bearing onto the transaxle input shaft front bearing retainer while passing the end of the fork through the opening in the clutch housing, and push the clutch fork onto the ball stud until firmly seated. Finally, apply a light coat of high-temperature grease to the face of the release bearing where it contacts the pressure plate diaphragm fingers, and complete the installation by reversing the removal procedure.

Genuine Toyota Corolla Release Bearing

Clutch Release Throw Out Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

28 Release Bearings found

View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-12191
$51.21 MSRP: $71.57
You Save: $20.36 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Bearing
- Replaces: 31230-0D011, 31230-0D012, 31230-12170, 31230-0D010, 31230-12171
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-2013 Toyota Corolla | CE, DX, LE, S, STD, VE, XR, XRS | 4 Cyl 1.6L, 4 Cyl 1.8L | 1ZZFE, 2ZRFE, 2ZZGE, 4AFE, 7AFE; 1ZZFE, 1ZZFE; ZZE110L-DEMDKA, 2ZRFE, 2ZZGE; ZRE142L-DEMDKA, 4AFE, 7AFE; AE101L-AEMDKA, AE101L-AEMDKK, AE101L-AEMNKK, AE101L-DEMDKA, AE101L-DEMDKK, AE101L-DEMNKA, AE101L-DEMNKK, AE102L-AEMNKA, AE102L-AEMNKK, AE102L-AWMNKA, AE102L-AWMNKK, AE102L-DEMEKA, AE102L-DEMNKA, AE102L-DEMNKK, AE92L-AEMDKA, AE92L-AEMDKK, AE92L-AEMNKA, AE92L-AEMNKK, AE92L-AEMRKA, AE92L-AWMDKA, AE92L-AWMDKK, AE92L-DEMDKA, AE92L-DEMDKK, AE92L-DEMNKA, AE92L-DEMNKK, AE92L-DEMRKA, ZRE142L-DEMDKK, ZRE142L-DEMSKA, ZRE142L-DEMSKK, ZZE110L-DEMDKA, ZZE110L-DEMDKK, ZZE110L-DEMNKA, ZZE110L-DEMRKA, ZZE110L-DEMRKK, ZZE110L-DEMSKA, ZZE110L-DEMSKK, ZZE130L-AEMDKA, ZZE130L-AEMNKA, ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-33020
$66.21 MSRP: $93.33
You Save: $27.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Bearing
- Manufacturer Note: PNC 31232A=TYPE A
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Corolla | XRS | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE141L-DEMSKA, AZE141L-DEMSKK
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-12170
$51.21 MSRP: $71.57
You Save: $20.36 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: L=83.8
- Replaced by: 31230-12191
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1991-2002 Toyota Corolla | CE, DX, LE, S, STD, VE | 4 Cyl 1.6L, 4 Cyl 1.8L | 1ZZFE, 4AFE, 7AFE; 1ZZFE, 4AFE, 7AFE; AE101L-AEMDKA, AE101L-AEMDKK, AE101L-AEMNKK, AE101L-DEMDKA, AE101L-DEMDKK, AE101L-DEMNKA, AE101L-DEMNKK, AE102L-AEMNKA, AE102L-AEMNKK, AE102L-AWMNKA, AE102L-AWMNKK, AE102L-DEMEKA, AE102L-DEMNKA, AE102L-DEMNKK, AE92L-AEMDKA, AE92L-AEMDKK, AE92L-AEMNKA, AE92L-AEMNKK, AE92L-AEMRKA, AE92L-AWMDKA, AE92L-AWMDKK, AE92L-DEMDKA, AE92L-DEMDKK, AE92L-DEMNKA, AE92L-DEMNKK, AE92L-DEMRKA, ZZE110L-DEMDKA, ZZE110L-DEMDKK, ZZE110L-DEMNKA, ZZE110L-DEMRKA, ZZE110L-DEMRKK, ZZE110L-DEMSKA, ZZE110L-DEMSKK
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-20170
$70.04 MSRP: $98.74
You Save: $28.70 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Bearing
- Replaces: 31230-20160
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1993 Toyota Corolla | DX, SR5 | 4 Cyl 1.6L | 4AFE; 4AFE; AE95L-AEMDKA, AE95L-AEMDKK, AE95L-CWMDKA, AE95L-CWMDKK, AE95L-CWMXKA, AE95L-CWMXKK
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-12171
$51.21 MSRP: $71.57
You Save: $20.36 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 31230-12191
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2002 Toyota Corolla | CE, LE, S | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE110L-DEMDKA, ZZE110L-DEMDKK, ZZE110L-DEMRKA, ZZE110L-DEMRKK, ZZE110L-DEMSKA, ZZE110L-DEMSKK
View related parts
Toyota Corolla Bearing, Ball
Part Number: 90363-38084
$53.29 MSRP: $74.49
You Save: $21.20 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Ball(For Clutch Release Hub)
- Comment: (FOR CLUTCH RELEASE HUB)
- Replaces: 90363-38009, 90363-38043, 90363-38009-85
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1975-1978 Toyota Corolla | DLX, Special, SR5, STD | 4 Cyl 1.6L | 2TC; 2TC; TE31L-KBA, TE31L-KBFA, TE31L-KDA, TE31L-KDFA, TE31L-KDFK, TE31L-KRK, TE31L-MBA, TE31L-MBFA, TE31L-MDA, TE31L-MDFA, TE37L-MQA, TE37L-MQK, TE38LV-KDFA, TE38LV-KDFK, TE38LV-MDFA, TE51L-CKDA, TE51L-CKDK, TE51L-CMDA, TE51L-CMQA, TE51L-CMQK, TE51L-LKDA, TE51L-LKDK, TE51L-LMDA, TE51L-LMQA, TE51L-LMQK
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-16060
$50.24 MSRP: $70.22
You Save: $19.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: NACHI
- Replaced by: 31230-16061-77
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1987-1988 Toyota Corolla | D, GTS, Q | 4 Cyl 1.6L | 4AGELC, 4ALC; 4AGELC, 4ALC; AE82L-EGMDCA, AE82L-EGMQFA, AE82L-EGMVFA
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-12110
$50.24 MSRP: $70.22
You Save: $19.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 31230-16061-77
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1987 Toyota Corolla | DX, LE | 4 Cyl 1.6L | 4ALC; 4ALC; AE82L-EEMDCA, AE82L-EEMDCK, AE82L-EEMNCA, AE82L-ELMDCA, AE82L-ELMDCK, AE82L-ELMNCA
View related parts
Toyota Corolla Bearing, Ball
Part Number: 90363-40008
$54.72 MSRP: $76.49
You Save: $21.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Ball(For Clutch Release Hub)
- Comment: (FOR CLUTCH RELEASE HUB)
- Replaced by: 90363-40008-77
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1980-1981 Toyota Corolla | DX, SR5, STD | 4 Cyl 1.8L | 3TC; 3TC; TE72L-ECKDCA, TE72L-ECKDCK, TE72L-ECMDCA, TE72L-ECMDCK, TE72L-ECMXCA, TE72L-ECMXCK, TE72L-EDKDCA, TE72L-EDKDCK, TE72L-EDKRCA, TE72L-EDKRCK, TE72L-EDMDCA, TE72L-EDMDCK, TE72L-EEKDCA, TE72L-EEKDCK, TE72L-EEKRCA, TE72L-EEMDCA, TE72L-EEMDCK, TE72L-ELKDCA, TE72L-ELKDCK, TE72L-ELMDCA, TE72L-ELMDCK, TE72L-ELMXCA, TE72L-ELMXCK, TE72LG-EWKDCA, TE72LG-EWKDCK, TE72LG-EWMDCA, TE72LG-EWMDCK
View related parts
Toyota Corolla Bearing, Ball
Part Number: 90363-40015
$61.42 MSRP: $86.57
You Save: $25.15 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Ball(For Clutch Release Hub)
- Comment: (FOR CLUTCH RELEASE HUB)
- Replaced by: 90363-40022-77
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1980-1981 Toyota Corolla | DX, SR5, STD | 4 Cyl 1.8L | 3TC; 3TC; TE72L-ECKDCA, TE72L-ECKDCK, TE72L-ECMDCA, TE72L-ECMDCK, TE72L-ECMXCA, TE72L-ECMXCK, TE72L-EDKDCA, TE72L-EDKDCK, TE72L-EDKRCA, TE72L-EDKRCK, TE72L-EDMDCA, TE72L-EDMDCK, TE72L-EEKDCA, TE72L-EEKDCK, TE72L-EEKRCA, TE72L-EEMDCA, TE72L-EEMDCK, TE72L-ELKDCA, TE72L-ELKDCK, TE72L-ELMDCA, TE72L-ELMDCK, TE72L-ELMXCA, TE72L-ELMXCK, TE72LG-EWKDCA, TE72LG-EWKDCK, TE72LG-EWMDCA, TE72LG-EWMDCK
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-32010
$46.52 MSRP: $65.02
You Save: $18.50 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: KOYO
- Replaced by: 31230-32100-77
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1984-1986 Toyota Corolla | DX, STD | 4 Cyl 1.8L | 1CLC; 1CLC; CE80L-EEKRCA, CE80L-ELMDCA
View related parts
Toyota Corolla Bearing, Ball
Part Number: 90363-40001
$54.72 MSRP: $76.49
You Save: $21.77 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Ball(For Clutch Release Hub)
- Comment: (FOR CLUTCH RELEASE HUB)
- Replaced by: 90363-40008-77
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1977-1981 Toyota Corolla | DLX, DX, Special, SR5, STD | 4 Cyl 1.6L, 4 Cyl 1.8L | 2TC, 3TC; 2TC, 3TC; TE31L-KBA, TE31L-KBFA, TE31L-KBK, TE31L-KDA, TE31L-KDFA, TE31L-KDFK, TE31L-KRK, TE31L-MBA, TE31L-MBFA, TE31L-MDA, TE31L-MDFA, TE37L-MQA, TE37L-MQK, TE38LV-KDFA, TE38LV-KDFK, TE38LV-MDFA, TE51L-CKDA, TE51L-CKDK, TE51L-CMDA, TE51L-CMQA, TE51L-CMQK, TE51L-LKDA, TE51L-LKDK, TE51L-LMDA, TE51L-LMQA, TE51L-LMQK, TE72L-ECKDCA, TE72L-ECKDCK, TE72L-ECMDCA, TE72L-ECMDCK, TE72L-ECMXCA, TE72L-ECMXCK, TE72L-EDKDCA, TE72L-EDKDCK, TE72L-EDKRCA, TE72L-EDKRCK, TE72L-EDMDCA, TE72L-EDMDCK, TE72L-EEKDCA, TE72L-EEKDCK, TE72L-EEKRCA, TE72L-EEMDCA, TE72L-EEMDCK, TE72L-ELKDCA, TE72L-ELKDCK, TE72L-ELMDCA, TE72L-ELMDCK, TE72L-ELMXCA, TE72L-ELMXCK, TE72LG-EWKDCA, TE72LG-EWKDCK, TE72LG-EWMDCA, TE72LG-EWMDCK
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-20160
$70.04 MSRP: $98.74
You Save: $28.70 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 31230-20170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1989 Toyota Corolla | DX, SR5 | 4 Cyl 1.6L | 4AFE; 4AFE; AE95L-AEMDKA, AE95L-AEMDKK, AE95L-CWMDKA, AE95L-CWMDKK, AE95L-CWMXKA, AE95L-CWMXKK
View related parts
Toyota Corolla Bearing, Ball
Part Number: 90363-33002
$51.03 MSRP: $71.33
You Save: $20.30 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Ball(For Clutch Release Hub)
- Comment: (FOR CLUTCH RELEASE HUB)
- Replaced by: 90363-33004
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1978-1979 Toyota Corolla | DLX, Special | 4 Cyl 1.2L | 3KC; 3KC; KE30L-KBA, KE30L-KBFA, KE30L-KBK, KE30L-MBA, KE30L-MBFA, KE50L-LKDK
View related parts
Toyota Corolla Bearing, Ball
Part Number: 90363-33080
$51.03 MSRP: $71.33
You Save: $20.30 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Ball(For Clutch Release Hub)
- Comment: (FOR CLUTCH RELEASE HUB)
- Replaced by: 90363-33004
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1976-1979 Toyota Corolla | DLX, Special, STD | 4 Cyl 1.2L | 3KC; 3KC; KE30L-KBA, KE30L-KBFA, KE30L-KBK, KE30L-KRK, KE30L-MBA, KE30L-MBFA, KE50L-LKDA, KE50L-LKDK
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-12111
$50.24 MSRP: $70.22
You Save: $19.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 31230-16061-77
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1986-1987 Toyota Corolla | DX, LE | 4 Cyl 1.6L | 4ALC; 4ALC; AE82L-EEMDCA, AE82L-EEMDCK, AE82L-EEMNCA, AE82L-ELMDCA, AE82L-ELMDCK
View related parts
Toyota Corolla Bearing, Ball
Part Number: 90363-40022
Product Specifications
- Other Name: Bearing, Ball(For Clutch Release Hub)
- Comment: (FOR CLUTCH RELEASE HUB)
- Replaced by: 90363-40022-77
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1980-1987 Toyota Corolla | DX, GTS, SR5, STD | 4 Cyl 1.6L, 4 Cyl 1.8L | 3TC, 4AC, 4AGEC; 3TC, 4AC, 4AGEC; AE71L-ECMDCA, AE71L-ECMDCK, AE71L-EDKRCA, AE71L-EDKRCK, AE71L-EDMDCA, AE71L-EDMDCK, AE71L-EEMDCA, AE71L-EEMDCK, AE71L-ELMDCA, AE71L-ELMDCK, AE71L-ESMDCA, AE71L-ESMDCK, AE71LG-EWMDCA, AE71LG-EWMDCK, AE86L-ECMQFA, AE86L-ECMQFK, AE86L-ECMXCA, AE86L-ECMXCK, AE86L-ESMDCA, AE86L-ESMQFA, AE86L-ESMQFK, AE86L-ESMXCA, AE86L-ESMXCK, TE72L-ECMDCA, TE72L-ECMXCA, TE72L-ECMXCK, TE72L-EDKRCA, TE72L-EDKRCK, TE72L-EDMDCA, TE72L-EDMDCK, TE72L-EEKDCA, TE72L-EEKRCA, TE72L-EEMDCA, TE72L-EEMDCK, TE72L-ELMDCA, TE72L-ELMXCA, TE72L-ELMXCK, TE72L-ESMDCA, TE72L-ESMXCA, TE72L-ESMXCK, TE72LG-EWMDCA, TE72LG-EWMDCK
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-12140
Product Specifications
- Manufacturer Note: L=74.15
- Replaced by: 31230-16061-77
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1988-1992 Toyota Corolla | D, DX, GTS, LE, Q, SR5, STD | 4 Cyl 1.6L | 4AF, 4AFE, 4AGE, 4AGELC, 4ALC; 4AF, 4AFE, 4AGE, 4AGELC, 4ALC; AE82L-EGMDCA, AE82L-EGMQFA, AE82L-EGMVFA, AE92L-ACMDKA, AE92L-ACMDUA, AE92L-ACMVFA, AE92L-ACMVFK, AE92L-ACMXKA, AE92L-ACMXKK, AE92L-ACMXUA, AE92L-ACMXUK, AE92L-AEMDKA, AE92L-AEMDKK, AE92L-AEMDUA, AE92L-AEMDUK, AE92L-AEMNKA, AE92L-AEMNKK, AE92L-AEMNUA, AE92L-AEMNUK, AE92L-AEMRKA, AE92L-AWMDKA, AE92L-AWMDKK, AE92L-AWMDUA, AE92L-AWMDUK, AE92L-DEMDKA, AE92L-DEMDKK, AE92L-DEMDUA, AE92L-DEMDUK, AE92L-DEMNKA, AE92L-DEMNKK, AE92L-DEMNUA, AE92L-DEMNUK, AE92L-DEMRKA
View related parts
Toyota Corolla Bearing Assy, Clutch Release
Part Number: 31230-12100
Product Specifications
- Replaced by: 31230-16061-77
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1986-1988 Toyota Corolla | D, DX, GTS, LE, Q | 4 Cyl 1.6L | 4AGELC, 4ALC; 4AGELC, 4ALC; AE82L-EEMDCA, AE82L-EEMDCK, AE82L-EEMNCA, AE82L-EGMDCA, AE82L-EGMQFA, AE82L-EGMVFA, AE82L-ELMDCA, AE82L-ELMDCK
View related parts
Toyota Corolla Hub, Clutch Release Bearing
Part Number: 31231-12031
Product Specifications
- Replaced by: 31231-12032
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1977-1979 Toyota Corolla | DLX, Special, STD | 4 Cyl 1.2L | 3KC; 3KC; KE30L-KBA, KE30L-KBFA, KE30L-KBK, KE30L-KRK, KE30L-MBA, KE30L-MBFA, KE50L-LKDA, KE50L-LKDK

| Page 1 of 2 |Next >

1-20 of 28 Results

Toyota Corolla Release Bearing

If you are in demand for superior quality and affordable OEM Toyota Corolla Release Bearing, then shop with us! We own a wide range of the reduced-priced genuine Toyota Corolla Release Bearing. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Corolla Release Bearing Parts Questions & Experts Answers

Bearing Assy, Clutch Release
31230-12191
Q: How to remove, inspect, and install Clutch Fork and Release Bearing on Toyota Corolla?
A: To remove the component, first disconnect the negative cable from the battery, then remove the transaxle. Next, detach the clutch fork from the ball stud by pulling on the retention spring, followed by the removal of the bearing and the fork. For inspection, hold the bearing by the outer race and rotate the inner race while applying pressure; it should turn smoothly, and if it doesn't or is noisy, replace the bearing/hub assembly. Wipe the bearing with a clean rag and check for damage, wear, and cracks, avoiding immersion in solvent as it is sealed for life. Also, inspect the fork for any cracks or bends. During installation, fill the inner groove of the release bearing with high-temperature grease and apply a light coat of the same grease to the transaxle input shaft splines and the front bearing retainer. Lubricate the fork ball socket, fork ends, and release cylinder pushrod socket with high-temperature grease. Attach the release bearing to the fork, ensuring proper engagement if a retaining clip is used. Slide the release bearing onto the transaxle input shaft front bearing retainer while passing the end of the fork through the opening in the clutch housing, and push the clutch fork onto the ball stud until firmly seated. Finally, apply a light coat of high-temperature grease to the face of the release bearing where it contacts the pressure plate diaphragm fingers, and complete the installation by reversing the removal procedure.