How do you remove and refit a wiper arm on Toyota Echo?

To detach the wiper arm, start the wiper motor then turn it off to give the wiper arm some time to droop to its 'park' position. Next, remove the wiper arm spindle nut cover, then unbolt the nut and free the spindle with reference to the procedure involving raising the tailgate wiper arm cover for better access to the nut. Raise the blade off the glass and remove the wiper arm from the spindle-loose, yet in some cases very tightly fitted on the splines of the latter. In such circumstances a flat bladed screwdriver can be used to gently pry the arm off, while being careful not to to destroy the scuttle cover panel, and in the worst case a little puller may be needed. For refitting, the wiper arm and splines ought to be clean ad dry before refitting the arm of the spindle in a manner that the wiper blade lies on the tape if was used during removal. Last but not the least, tighten the spindle nut as far as it can go then put back the nut cover back into its place.

Genuine Toyota Echo Wiper Arm

Windshield Wiper Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

View related parts
Toyota Echo Rear Windshield Wiper Arm
Part Number: 85241-52010
$93.01 MSRP: $131.11
You Save: $38.10 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Wiper; Rear Arm, Wiper Arm
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2005 Toyota Echo | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP13L-AGMRKK, NCP13L-AGPRKK, NCP13L-AHMRKK, NCP13L-AHPRKK
View related parts
Toyota Echo Front Windshield Wiper Arm, Right
Part Number: 85211-52100
Product Specifications
- Other Name: Arm, Front Wiper, Rh; Wiper Arm
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2005 Toyota Echo | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK, NCP13L-AGMRKK, NCP13L-AGPRKK, NCP13L-AHMRKK, NCP13L-AHPRKK
View related parts
Toyota Echo Front Windshield Wiper Arm, Left
Part Number: 85221-52100
$87.65 MSRP: $123.55
You Save: $35.90 (30%)
Product Specifications
- Other Name: Arm, Front Wiper, Lh; Wiper Arm
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2005 Toyota Echo | 4 Cyl 1.5L | 1NZFE; 1NZFE; NCP12L-BDMRKA, NCP12L-BDMRKK, NCP12L-BDPRKA, NCP12L-BDPRKK, NCP12L-BEMRKA, NCP12L-BEMRKK, NCP12L-BEPRKA, NCP12L-BEPRKK, NCP13L-AGMRKK, NCP13L-AGPRKK, NCP13L-AHMRKK, NCP13L-AHPRKK

Toyota Echo Wiper Arm

If you are in demand for superior quality and affordable OEM Toyota Echo Wiper Arm, then shop with us! We own a wide range of the reduced-priced genuine Toyota Echo Wiper Arm. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Echo Wiper Arm Parts Questions & Experts Answers

Front Windshield Wiper Arm, Left
85221-52100
Q: How do you remove and refit a wiper arm on Toyota Echo?
A: To detach the wiper arm, start the Wiper Motor then turn it off to give the wiper arm some time to droop to its 'park' position. Next, remove the wiper arm spindle nut cover, then unbolt the nut and free the spindle with reference to the procedure involving raising the tailgate wiper arm cover for better access to the nut. Raise the blade off the glass and remove the wiper arm from the spindle-loose, yet in some cases very tightly fitted on the splines of the latter. In such circumstances a flat bladed screwdriver can be used to gently pry the arm off, while being careful not to to destroy the scuttle cover panel, and in the worst case a little puller may be needed. For refitting, the wiper arm and splines ought to be clean ad dry before refitting the arm of the spindle in a manner that the wiper blade lies on the tape if was used during removal. Last but not the least, tighten the spindle nut as far as it can go then put back the nut cover back into its place.