How to remove and install the hood latch and hood release cable on Toyota Highlander?

On 2014 and later models, remove the grille. Scribe a line around the latch to aid alignment when installing, then remove the retaining bolts securing the hood latch to the radiator support. To adjust the hood latch horizontally or vertically, loosen these bolts. Remove the latch. Disconnect the hood cable by disengaging the cable from the latch. Pry out the cable retainer from the backside of the hood latch assembly, then disengage the cable. Installation is the reverse of removal. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed. Working in the passenger compartment, lift the hood release handle lever upward, then pull down on the cable housing end and disengage the cable from the hood release lever handle. Lift upward on the handle and pull the cable housing end from the base of the handle, then detach the cable end from the lever. If the handle lever needs to be replaced simply pull outward on the handle retaining tab and push downward to release it from the instrument panel. Attach a piece of thin wire or string to the end of the cable. Working in the engine compartment, disconnect the hood cable from the latch. Unclip all the cable retaining clips on the radiator support and the inner fenderwell. Pull the cable forward into the engine compartment until you can see the wire or string, then remove the wire or string from the old cable and fasten it to the new cable. With the new cable attached to the wire or string, pull the wire or string back through the firewall until the new cable reaches the inside handle. Working in the passenger compartment, install the new cable into the hood release lever, making sure the cable housing fits snugly into the notch in the handle bracket. Pull on the cable with your fingers from the passenger compartment until the cable stop seats in the grommet on the firewall. The remainder of the installation is the reverse of removal.

Genuine Toyota Highlander Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Hood Latches found

View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-0E100
$67.25 MSRP: $94.79
You Save: $27.54 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 2GRFKS, 2GRFXE, 2GRFXS; 1ARFE, 2GRFE, 2GRFKS, 2GRFXE, 2GRFXS; ASU50L-ARTNKA, GSU50L-ARTGKA, GSU50L-ARTMKA, GSU50L-ARTNKA, GSU50L-ARZGHA, GSU50L-ARZMHA, GSU50L-ARZNHA, GSU55L-ARTGKA, GSU55L-ARTMKA, GSU55L-ARTNKA, GSU55L-ARZGHA, GSU55L-ARZMHA, GSU55L-ARZNHA, GVU58L-ARXGHA, GVU58L-ARXGKA, GVU58L-ARXMHA, GVU58L-ARXMKA, GVU58L-ARXNHA, GVU58L-ARXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-0E071
$69.02 MSRP: $97.29
You Save: $28.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Replaces: 53510-0E070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2013 Toyota Highlander | Limited, STD | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE; 1ARFE, 2GRFE; ASU40L-ARTNKA, GSU40L-ARAGKA, GSU40L-ARANKA, GSU45L-ARAGKA, GSU45L-ARANKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48180
$79.05 MSRP: $111.44
You Save: $32.39 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Replaced by: 53510-48184
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2009 Toyota Highlander | Grande, Limited, Sport, STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSU40L-BRAGKA, GSU40L-BRAMKA, GSU40L-BRANKA, GSU40L-BRASKA, GSU45L-BRAGKA, GSU45L-BRAMKA, GSU45L-BRANKA, GSU45L-BRASKA, MHU48L-BRXMKA, MHU48L-BRXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-0E090
$44.14 MSRP: $61.70
You Save: $17.56 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2019 Toyota Highlander | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 2GRFKS, 2GRFXE, 2GRFXS; 1ARFE, 2GRFE, 2GRFKS, 2GRFXE, 2GRFXS; ASU50L-ARTNKA, GSU50L-ARTNKA, GSU50L-ARZNHA, GSU55L-ARTNKA, GSU55L-ARZNHA, GVU58L-ARXNHA, GVU58L-ARXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48051
$59.22 MSRP: $83.48
You Save: $24.26 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch, Lock, Lock Assembly
- Replaces: 53510-48050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Highlander | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 2AZFE, 3MZFE; 1MZFE, 2AZFE, 3MZFE; ACU20L-BRPNKA, ACU20L-BWPNKA, ACU25L-BRPNKA, ACU25L-BWPNKA, MCU20L-BWPNKA, MCU23L-BRANKA, MCU23L-BWANKA, MCU25L-BWPNKA, MCU28L-BRANKA, MCU28L-BWANKA, MHU23L-BRXNKA, MHU23L-BWXNKA, MHU28L-BRXNKA, MHU28L-BWXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-0E040
$55.80 MSRP: $78.00
You Save: $22.20 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Replaces: 53510-48170
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2011 Toyota Highlander | Grande, Limited, Medium, STD, Sport | 4 Cyl 2.7L, 6 Cyl 3.3L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 3MZFE; 1ARFE, 2GRFE, 2GRFE; ASU40L-ARTNKA, 3MZFE; ASU40L-BRTNKA, GSU40L-ARAMKA, GSU40L-ARANKA, GSU40L-ARASKA, GSU40L-BRAMKA, GSU40L-BRANKA, GSU40L-BRASKA, GSU45L-ARAMKA, GSU45L-ARANKA, GSU45L-ARASKA, GSU45L-BRAMKA, GSU45L-BRANKA, GSU45L-BRASKA, MHU48L-BRXMKA, MHU48L-BRXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48181
$79.05 MSRP: $111.44
You Save: $32.39 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Replaced by: 53510-48184
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Highlander | Grande, Limited, Sport, STD | 4 Cyl 2.7L, 6 Cyl 3.3L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 3MZFE; 1ARFE, 2GRFE, 3MZFE; ASU40L-BRTNKA, GSU40L-BRAGKA, GSU40L-BRAMKA, GSU40L-BRANKA, GSU40L-BRASKA, GSU45L-BRAGKA, GSU45L-BRAMKA, GSU45L-BRANKA, GSU45L-BRASKA, MHU48L-BRXMKA, MHU48L-BRXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48183
$79.05 MSRP: $111.44
You Save: $32.39 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Replaced by: 53510-48184
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Highlander | Grande, Limited, Sport, STD | 4 Cyl 2.7L, 6 Cyl 3.3L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 3MZFE; 1ARFE, 2GRFE, 3MZFE; ASU40L-BRTNKA, GSU40L-BRAGKA, GSU40L-BRAMKA, GSU40L-BRANKA, GSU40L-BRASKA, GSU45L-BRAGKA, GSU45L-BRAMKA, GSU45L-BRANKA, GSU45L-BRASKA, MHU48L-BRXMKA, MHU48L-BRXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48220
$69.02 MSRP: $97.29
You Save: $28.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Replaces: 53510-48150
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2013 Toyota Highlander | Limited, STD | 6 Cyl 3.5L | 2GRFXE; 2GRFXE; GVU48L-BRXGKA, GVU48L-BRXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48170
$55.80 MSRP: $78.00
You Save: $22.20 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Replaced by: 53510-0E040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2011 Toyota Highlander | Grande, Limited, Sport, STD | 4 Cyl 2.7L, 6 Cyl 3.3L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 3MZFE; 1ARFE, 2GRFE, 3MZFE; ASU40L-BRTNKA, GSU40L-BRAMKA, GSU40L-BRANKA, GSU40L-BRASKA, GSU45L-BRAMKA, GSU45L-BRANKA, GSU45L-BRASKA, MHU48L-BRXMKA, MHU48L-BRXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48040
$79.05 MSRP: $111.44
You Save: $32.39 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Manufacturer Note: W(ANTI-THEFT DEVICE:IMMOBILIZER & ALARM)
- Replaced by: 53510-48041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota Highlander | 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 3MZFE; 1MZFE, 3MZFE; MCU20L-BWPNKA, MCU23L-BRANKA, MCU23L-BWANKA, MCU25L-BWPNKA, MCU28L-BRANKA, MCU28L-BWANKA
View related parts
Toyota Highlander Lock Assy, Hood
Part Number: 53510-0E150
$63.47 MSRP: $89.47
You Save: $26.00 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Highlander | 4 Cyl 2.5L, 6 Cyl 3.5L | 2GRFKS, A25AFXS; 2GRFKS, A25AFXS; AXUH70L-ARXGHA, AXUH70L-ARXMHA, AXUH70L-ARXNHA, AXUH78L-ARXGHA, AXUH78L-ARXMHA, AXUH78L-ARXNHA, GSU70L-ARZGHA, GSU70L-ARZMHA, GSU70L-ARZNHA, GSU70L-ARZSHA, GSU75L-ARZGHA, GSU75L-ARZMHA, GSU75L-ARZNHA, GSU75L-ARZSHA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-0E051
$78.22 MSRP: $110.27
You Save: $32.05 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Replaced by: 53510-0E052
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Highlander | Limited, Medium, Sport, STD | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE; 1ARFE, 2GRFE; ASU40L-ARTNKA, GSU40L-ARAGKA, GSU40L-ARAMKA, GSU40L-ARANKA, GSU40L-ARASKA, GSU45L-ARAGKA, GSU45L-ARAMKA, GSU45L-ARANKA, GSU45L-ARASKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48041
$79.05 MSRP: $111.44
You Save: $32.39 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch, Lock
- Manufacturer Note: W(ANTI-THEFT DEVICE:IMMOBILIZER & ALARM)
- Replaces: 53510-48040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Highlander | 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 3MZFE; 1MZFE, 3MZFE; MCU20L-BWPNKA, 3MZFE; MCU23L-BRANKA, MCU23L-BRANKA, MCU23L-BWANKA, MCU25L-BWPNKA, MCU28L-BRANKA, MCU28L-BWANKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48110
$79.05 MSRP: $111.44
You Save: $32.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Lock
- Manufacturer Note: ANTI-THEFT SYSTEM-W(ENGINE IMMOBILIZER & AUTO ALARM)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2007 Toyota Highlander | 6 Cyl 3.3L | 3MZFE; 3MZFE; MHU23L-BRXNKA, MHU23L-BWXNKA, MHU28L-BRXNKA, MHU28L-BWXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48140
$48.30 MSRP: $67.52
You Save: $19.22 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2013 Toyota Highlander | STD | 6 Cyl 3.5L | 2GRFXE; 2GRFXE; GVU48L-BRXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-0E070
$69.02 MSRP: $97.29
You Save: $28.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Replaced by: 53510-0E071
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Highlander | Limited, STD | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE; 1ARFE, 2GRFE; ASU40L-ARTNKA, GSU40L-ARAGKA, GSU40L-ARANKA, GSU45L-ARAGKA, GSU45L-ARANKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48150
$69.02 MSRP: $97.29
You Save: $28.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Replaced by: 53510-48220
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Highlander | Limited, STD | 6 Cyl 3.5L | 2GRFXE; 2GRFXE; GVU48L-BRXGKA, GVU48L-BRXNKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-0E050
$78.22 MSRP: $110.27
You Save: $32.05 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Replaced by: 53510-0E052
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2010-2011 Toyota Highlander | Limited, Medium, Sport, STD | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE; 1ARFE, 2GRFE; ASU40L-ARTNKA, GSU40L-ARAGKA, GSU40L-ARAMKA, GSU40L-ARANKA, GSU40L-ARASKA, GSU45L-ARAGKA, GSU45L-ARAMKA, GSU45L-ARANKA, GSU45L-ARASKA
View related parts
Toyota Highlander Lock Assembly, Hood
Part Number: 53510-48182
$79.05 MSRP: $111.44
You Save: $32.39 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assy, Hood
- Manufacturer Note: ANTI-THEFT SYSTEM-WITH(ALARM & IMMOBILIZER)
- Replaced by: 53510-48184
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2011 Toyota Highlander | Grande, Limited, Sport, STD | 4 Cyl 2.7L, 6 Cyl 3.3L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 3MZFE; 1ARFE, 2GRFE, 3MZFE; ASU40L-BRTNKA, GSU40L-BRAGKA, GSU40L-BRAMKA, GSU40L-BRANKA, GSU40L-BRASKA, GSU45L-BRAGKA, GSU45L-BRAMKA, GSU45L-BRANKA, GSU45L-BRASKA, MHU48L-BRXMKA, MHU48L-BRXNKA

| Page 1 of 2 |Next >

1-20 of 23 Results

Toyota Highlander Hood Latch

If you are in demand for superior quality and affordable OEM Toyota Highlander Hood Latch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Highlander Hood Latch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Highlander Hood Latch Parts Questions & Experts Answers

Lock Assembly, Hood
53510-48051
Q: How to remove and install the hood latch and hood release cable on Toyota Highlander?
A: On 2014 and later models, remove the Grille. Scribe a line around the latch to aid alignment when installing, then remove the retaining bolts securing the hood latch to the radiator support. To adjust the hood latch horizontally or vertically, loosen these bolts. Remove the latch. Disconnect the hood cable by disengaging the cable from the latch. Pry out the cable retainer from the backside of the hood latch assembly, then disengage the cable. Installation is the reverse of removal. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed. Working in the passenger compartment, lift the hood release handle lever upward, then pull down on the cable housing end and disengage the cable from the hood release lever handle. Lift upward on the handle and pull the cable housing end from the base of the handle, then detach the cable end from the lever. If the handle lever needs to be replaced simply pull outward on the handle retaining tab and push downward to release it from the instrument panel. Attach a piece of thin wire or string to the end of the cable. Working in the engine compartment, disconnect the hood cable from the latch. Unclip all the cable retaining clips on the radiator support and the inner fenderwell. Pull the cable forward into the engine compartment until you can see the wire or string, then remove the wire or string from the old cable and fasten it to the new cable. With the new cable attached to the wire or string, pull the wire or string back through the firewall until the new cable reaches the inside handle. Working in the passenger compartment, install the new cable into the hood release lever, making sure the cable housing fits snugly into the notch in the handle bracket. Pull on the cable with your fingers from the passenger compartment until the cable stop seats in the grommet on the firewall. The remainder of the installation is the reverse of removal.