How to remove and install the receiver-drier in a Toyota Matrix air conditioning system?

To remove the A/C accumulator from the vehicle, which is mounted on the passenger's side at the end of the A/C Condenser, you must first have the refrigerant discharged and recovered. Afterward, you need to remove the large plug at the bottom of the A/C accumulator. This can be done by using needle-nose pliers to grip and extract the filter-drier element inside the accumulator. For the installation process, essentially reverse the removal steps. Begin by inserting a new element and lightly lubricating the plug's O-ring with a bit of refrigerant oil. Finally, it's necessary to have the system evacuated, charged, and leak tested. If the A/C accumulator or condenser was replaced with a new unit, you should add new refrigeration oil to the system. Ensure to use only refrigerant oil that is compatible with R-134a refrigerant.

Genuine Toyota Matrix A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Accumulator found

View related parts
Toyota Matrix Dryer, Cooler
Part Number: 88474-17010
$91.92 MSRP: $129.57
You Save: $37.65 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Dehydrator, Drier
- Replaces: 88474-08030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2014 Toyota Matrix | CE, LE, S, STD, XR, XRS | 4 Cyl 1.8L, 4 Cyl 2.4L | 1ZZFE, 2AZFE, 2ZRFE, 2ZZGE; 1ZZFE, 2AZFE, 2ZRFE, 2ZZGE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE144L-DHPNKA, AZE144L-DHPNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK, ZRE142L-DHMDKA, ZRE142L-DHMDKK, ZRE142L-DHPDKA, ZRE142L-DHPDKK, ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK, ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK

Toyota Matrix A/C Accumulator

The A/C Accumulator in Toyota Matrix vehicles is a very important part that has a major influence on its cooling ability. Located between the evaporator and the compressor, it's main responsibilities are to remove both liquid and solid contaminants, mainly water, oil, and particles. It checks on Wet Apply works as a cylinder and plays a vital role of making sure the A/C system has adequate clean and dry environment all through for it to function as required. The years that have elapsed since Toyota Matrix vehicles were produced show that different types of A/C Accumulators can be used, all of which are aimed at successfully performing the same task.

If you are in demand for superior quality and affordable OEM Toyota Matrix A/C Accumulator, then shop with us! We own a wide range of the reduced-priced genuine Toyota Matrix A/C Accumulator. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Matrix A/C Accumulator Parts Questions & Experts Answers

Dryer, Cooler
88474-17010
Q: How to remove and install the receiver-drier in a Toyota Matrix air conditioning system?
A: To remove the A/C accumulator from the vehicle, which is mounted on the passenger's side at the end of the A/C Condenser, you must first have the refrigerant discharged and recovered. Afterward, you need to remove the large plug at the bottom of the A/C accumulator. This can be done by using needle-nose pliers to grip and extract the filter-drier element inside the accumulator. For the installation process, essentially reverse the removal steps. Begin by inserting a new element and lightly lubricating the plug's O-ring with a bit of refrigerant oil. Finally, it's necessary to have the system evacuated, charged, and leak tested. If the A/C accumulator or condenser was replaced with a new unit, you should add new refrigeration oil to the system. Ensure to use only refrigerant oil that is compatible with R-134a refrigerant.