How to test and replace the engine cooling fan and relay on my Toyota Matrix?

The Cooling Fan Assembly on these models is controlled by the Powertrain Control Module (PCM) through inputs from the coolant temperature sensor. To test an inoperative fan motor, check the fuses or fusible links first, then disconnect the electrical connector and use fused jumper wires to connect the fan directly to the battery. If the fan still doesn't work, replace the fan motor. If the motor tested okay but is still inoperative, the fault may lie in the relays, fuse, wiring, coolant temperature sensor, or PCM. To remove the fan, disconnect the battery cable, wiring connector, and coolant overflow hose, then unbolt the fan shroud from the radiator and lift the fan/shroud/coolant reservoir assembly from the vehicle. Hold the fan blades and remove the fan retaining nut (and spacer, if equipped), then unbolt the fan motor from the shroud. Installation is the reverse of removal.

Genuine Toyota Matrix Cooling Fan Assembly

Engine Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Cooling Fan Assemblys found

View related parts
Toyota Matrix Fan
Part Number: 16361-0D090
$70.85 MSRP: $99.86
You Save: $29.01 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S, STD, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; 1ZZFE, 2ZZGE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK
View related parts
Toyota Matrix Fan
Part Number: 16361-0H260
$76.11 MSRP: $107.29
You Save: $31.18 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, NO.2; Fan Blade
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE144L-DHPNKA, AZE144L-DHPNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK
View related parts
Toyota Matrix Fan
Part Number: 16361-0H250
$54.89 MSRP: $76.74
You Save: $21.85 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE144L-DHPNKA, AZE144L-DHPNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK
View related parts
Toyota Matrix Fan
Part Number: 16361-0T040
$57.76 MSRP: $80.74
You Save: $22.98 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: AIR CONDITIONER-MANUAL A/C
- Replaced by: 16361-0T041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 1.8L | 2ZRFE; 2ZRFE; ZRE142L-DHMDKA, ZRE142L-DHMDKK, ZRE142L-DHPDKA, ZRE142L-DHPDKK
View related parts
Toyota Matrix Fan
Part Number: 16361-0D100
$70.85 MSRP: $99.86
You Save: $29.01 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Blade
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | STD, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; 1ZZFE, 2ZZGE; ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE133L-DHPSFA, ZZE133L-DHPSFK, ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK

Toyota Matrix Cooling Fan Assembly

The Cooling Fan Assembly known in Toyota Matrix is crucial for managing the engine temperatures through the provision of airflow through the radiator part. This assembly entails a fan blade, mounting shroud and a motor normally located close to the radiator so as to cool the hot coolant as it makes its way back to the engine. Currently Toyota Matrix models incorporate mechanical as well as electric cooling fan assembly. Mechanical fans are also mounted on the water pump shaft and activated by a thermal clutch; the high-speed performance is quieted down and the fuel consumption is minimized. However, electric cooling fans which is driven by a 12V motor turn on by coolant temperature and air conditioning requirements to promote more effective airflow through the radiator and condenser. It may be important to note that the design and the way in which those cooling fan assembly is used in the structure of the different Generations of Matrix may be different, depending on certain improvements in technology and the efficiency of the cooling process.

If you are in demand for superior quality and affordable OEM Toyota Matrix Cooling Fan Assembly, then shop with us! We own a wide range of the reduced-priced genuine Toyota Matrix Cooling Fan Assembly. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Matrix Cooling Fan Assembly Parts Questions & Experts Answers

Fan
16361-0D100
Q: How to test and replace the engine cooling fan and relay on my Toyota Matrix?
A: The Cooling Fan Assembly on these models is controlled by the Powertrain Control Module (PCM) through inputs from the Coolant Temperature Sensor. To test an inoperative fan motor, check the fuses or fusible links first, then disconnect the electrical connector and use fused jumper wires to connect the fan directly to the battery. If the fan still doesn't work, replace the fan motor. If the motor tested okay but is still inoperative, the fault may lie in the relays, fuse, wiring, coolant temperature sensor, or PCM. To remove the fan, disconnect the battery cable, wiring connector, and coolant overflow hose, then unbolt the fan shroud from the Radiator and lift the fan/shroud/coolant reservoir assembly from the vehicle. Hold the fan blades and remove the fan retaining nut (and spacer, if equipped), then unbolt the fan motor from the shroud. Installation is the reverse of removal.