How to remove and install the crankshaft pulley on Toyota Matrix?

Disconnect the cable from the negative terminal of the battery. Remove the drive belt. With the parking brake applied and the shifter in Park for automatic or in gear for manual, loosen the lug nuts from the right front wheel, then raise the front of the vehicle and support it securely on jack stands. Remove the right front wheel and the right splash shield from the wheel well. Remove the bolt from the front of the crankshaft, using a breaker bar if necessary due to tightness. Using a puller that bolts to the crankshaft pulley hub, remove the crankshaft pulley from the crankshaft, ensuring to use the proper adapter on the end of the puller screw to prevent damaging the crankshaft threads. Depending on the type of puller, it may be necessary to support the engine from above, remove the right-side engine mount, and lower the engine to gain sufficient clearance for the puller. To install the crankshaft pulley, slide it onto the crankshaft as far as it will go, then use a vibration damper installation tool to press the pulley onto the crankshaft, ensuring the slot in the hub is aligned with the Woodruff key at the end of the crankshaft, and the crankshaft bolt can also be used to press the pulley into position. Tighten the crankshaft bolt to the specified torque, and complete the remaining installation steps in reverse order of removal.

Genuine Toyota Matrix Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Crankshaft Pulleys found

View related parts
Toyota Matrix Gear Or Sprocket, Crankshaft Timing
Part Number: 13521-22020
$21.23 MSRP: $29.68
You Save: $8.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (J)
- Replaced by: 13521-0D010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S, STD, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; 1ZZFE, 2ZZGE; ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK, ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK
View related parts
Toyota Matrix PULLEY, Crankshaft
Part Number: 13470-88600
$311.05 MSRP: $446.03
You Save: $134.98 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2007 Toyota Matrix | S, XRS | 4 Cyl 1.8L | 2ZZGE; 2ZZGE; ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK
View related parts
Toyota Matrix Gear Or Sprocket, Crankshaft Timing
Part Number: 13521-0D010
$21.23 MSRP: $29.68
You Save: $8.45 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear, Timing Gear
- Manufacturer Note: (L)
- Replaces: 13521-0D020, 13521-22020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S, STD, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; 1ZZFE, 1ZZFE; ZZE130L-DEMDKA, 2ZZGE; ZZE130L-DEPDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK, ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK
View related parts
Toyota Matrix PULLEY, Crankshaft
Part Number: 13470-28020
$272.91 MSRP: $391.35
You Save: $118.44 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 13470-0H030, 13470-0H010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE144L-DHPNKA, AZE144L-DHPNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK
View related parts
Toyota Matrix SPROCKET, CRANKSHAFT
Part Number: 13521-0T030
$16.84 MSRP: $23.53
You Save: $6.69 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Or Sprocket, Crankshaft Timing; Crankshaft Gear
- Replaces: 13521-37010, 13521-37011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 1.8L | 2ZRFE; 2ZRFE; ZRE142L-DHMDKA, ZRE142L-DHMDKK, ZRE142L-DHPDKA, ZRE142L-DHPDKK
View related parts
Toyota Matrix PULLEY, Crankshaft
Part Number: 13470-22021
$273.93 MSRP: $392.80
You Save: $118.87 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Pulley, Pulley
- Manufacturer Note: (J)
- Replaces: 13470-22020, 13470-0D010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S, STD, XR | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK
View related parts
Toyota Matrix PULLEY, Crankshaft
Part Number: 13470-0D010
$273.93 MSRP: $392.80
You Save: $118.87 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (L)
- Replaced by: 13470-22021
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S, STD, XR | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK
View related parts
Toyota Matrix Gear Or Sprocket, Crankshaft Timing
Part Number: 13521-28030
$16.87 MSRP: $23.59
You Save: $6.72 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13521-0H010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE144L-DHPNKA, AZE144L-DHPNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK
View related parts
Toyota Matrix Gear Or Sprocket, Crankshaft Timing
Part Number: 13521-0H010
$16.87 MSRP: $23.59
You Save: $6.72 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Replaces: 13521-0H050, 13521-28030, 13521-28010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE144L-DHPNKA, AZE144L-DHPNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK
View related parts
Toyota Matrix PULLEY, Crankshaft
Part Number: 13470-0H010
$272.91 MSRP: $391.35
You Save: $118.44 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13470-28020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2013 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE144L-DHPNKA, AZE144L-DHPNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK
View related parts
Toyota Matrix PULLEY, Crankshaft
Part Number: 13470-37020
$290.51 MSRP: $416.57
You Save: $126.06 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 1.8L | 2ZRFE; 2ZRFE; ZRE142L-DHMDKA, ZRE142L-DHMDKK, ZRE142L-DHPDKA, ZRE142L-DHPDKK
View related parts
Toyota Matrix Gear Or Sprocket, Crankshaft Timing
Part Number: 13521-37010
$16.84 MSRP: $23.53
You Save: $6.69 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13521-0T030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 1.8L | 2ZRFE; 2ZRFE; ZRE142L-DHMDKA, ZRE142L-DHMDKK, ZRE142L-DHPDKA, ZRE142L-DHPDKK

Toyota Matrix Crankshaft Pulley

If you are in demand for superior quality and affordable OEM Toyota Matrix Crankshaft Pulley, then shop with us! We own a wide range of the reduced-priced genuine Toyota Matrix Crankshaft Pulley. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Matrix Crankshaft Pulley Parts Questions & Experts Answers

PULLEY, Crankshaft
13470-22021
Q: How to remove and install the crankshaft pulley on Toyota Matrix?
A: Disconnect the cable from the negative terminal of the battery. Remove the drive belt. With the parking brake applied and the shifter in Park for automatic or in gear for manual, loosen the lug nuts from the right front wheel, then raise the front of the vehicle and support it securely on jack stands. Remove the right front wheel and the right splash shield from the wheel well. Remove the bolt from the front of the crankshaft, using a breaker bar if necessary due to tightness. Using a puller that bolts to the crankshaft pulley hub, remove the crankshaft pulley from the crankshaft, ensuring to use the proper adapter on the end of the puller screw to prevent damaging the crankshaft threads. Depending on the type of puller, it may be necessary to support the engine from above, remove the right-side Engine Mount, and lower the engine to gain sufficient clearance for the puller. To install the crankshaft pulley, slide it onto the crankshaft as far as it will go, then use a vibration damper installation tool to press the pulley onto the crankshaft, ensuring the slot in the hub is aligned with the Woodruff key at the end of the crankshaft, and the crankshaft bolt can also be used to press the pulley into position. Tighten the crankshaft bolt to the specified torque, and complete the remaining installation steps in reverse order of removal.