How to remove and install a condenser in a Toyota MR2?

Drain the engine coolant. Remove the cooling fans/shroud assembly. Remove the radiator. Remove the four screws and four hex bolts from the protector. Also, remove the pop fastener and nut from each end of the protector. Remove the protector. Remove the lower condenser mount nuts. Remove the plastic grille. Disconnect the inlet and outlet tube fittings. Lower the vehicle. Remove the upper condenser bracket bolts. Remove the condenser. Installation is the reverse of removal.

Genuine Toyota MR2 A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 A/C Condensers found

View related parts
Toyota MR2 Condenser Assy, Cooler
Part Number: 88460-17060
$282.33 MSRP: $404.84
You Save: $122.51 (31%)
Product Specifications
- Other Name: Condenser
- Replaces: 88460-17050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1990-1994 Toyota MR2 | 4 Cyl 2.0L, 4 Cyl 2.2L | 3SGTE, 5SFE; 3SGTE, 5SFE; SW20L-ACMZZA, SW20L-AJMZZA, SW21L-ACMZKA, SW21L-ACPZKA, SW21L-AJMZKA, SW21L-AJPZKA
View related parts
Toyota MR2 Condenser Assy, Cooler
Part Number: 88460-17040
Product Specifications
- Other Name: Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1986-1989 Toyota MR2 | GT, Super Charger | 4 Cyl 1.6L | 4AGELC, 4AGZE; 4AGELC, 4AGZE; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJMQRA, AW11L-WJMQRK, AW11L-WJPQFA, AW11L-WJPQRA
View related parts
Toyota MR2 Condenser Assy, Cooler
Part Number: 88460-17020
Product Specifications
- Other Name: Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1985-1987 Toyota MR2 | GT | 4 Cyl 1.6L | 4AGELC; 4AGELC; AW11L-WCMQFA, AW11L-WCMQFK, AW11L-WCPQFA, AW11L-WCPQFK, AW11L-WJMQFA, AW11L-WJMQFK, AW11L-WJPQFA
View related parts
Toyota MR2 Condenser Assy, Cooler
Part Number: 88460-17080
Product Specifications
- Other Name: Condenser
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1993-1995 Toyota MR2 | 4 Cyl 2.0L, 4 Cyl 2.2L | 3SGTE, 5SFE; 3SGTE, 5SFE; SW20L-ACMZZA, SW20L-AJMZZA, SW21L-ACMZKA, SW21L-ACPZKA, SW21L-AJMZKA

Toyota MR2 A/C Condenser

The A/C Condenser in Toyota MR2 serve as a heat exchanger which has the duty of cooling the gaseous refrigerant so as to change its phase to a liquid form before it proceeds to the accumulator. Usually mounted in front of the radiator, the A/C Condenser consists of a series of tubes through which this cooling occurs. While going through the various MR2 models, it might be seen that the design of the A/C Condenser has changed, but its function is as follows. The mode of heat exchange is retained in different versions of the device, thus controlling the refrigerant. There may be differences in styling or design or the type but the functionality of the A/C Condenser remains an important part of the air conditioning systems in all MR2 variants.

If you are in demand for superior quality and affordable OEM Toyota MR2 A/C Condenser, then shop with us! We own a wide range of the reduced-priced genuine Toyota MR2 A/C Condenser. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota MR2 A/C Condenser Parts Questions & Experts Answers

Condenser Assy, Cooler
88460-17020
Q: How to remove and install a condenser in a Toyota MR2?
A: Drain the engine coolant. Remove the cooling fans/shroud assembly. Remove the Radiator. Remove the four screws and four hex bolts from the protector. Also, remove the pop fastener and nut from each end of the protector. Remove the protector. Remove the lower condenser mount nuts. Remove the plastic grille. Disconnect the inlet and outlet tube fittings. Lower the vehicle. Remove the upper condenser bracket bolts. Remove the condenser. Installation is the reverse of removal.