What is the location and function of the brake light switch on Toyota Sequoia?

The brake light switch is on the brake pedal bracket, under the steering column panel. It controls the brake light circuit. If brake lights fail, check the fuse and bulbs first. If they're okay, check the switch's voltage. No voltage indicates an open circuit between the fuse block and switch. To replace, remove the panel, unplug the connector, rotate the switch counterclockwise, and remove. Install in reverse order.

How to adjust the Brake Light Switch on Toyota Sequoia?

First of all, pedal height refers to the brake pedal's distance from the floor. If it's not within the specified range, inspect the brake pedal, pedal arm, mounting bracket, and dash panel for damage. Adjust the brake light switch if necessary. To measure pedal height, start the engine, press the accelerator, and measure with the carpet pulled back and the pedal pad removed. Pedal free-play is the slack before the brake system is engaged. If incorrect, adjust the brake light switch or check the brake system. Pedal reserve height is the pedal's distance from the floor when fully depressed.

Genuine Toyota Sequoia Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Light Switches found

View related parts
Toyota Sequoia Switch Assy, Stop Lamp
Part Number: 84340-09070
$16.66 MSRP: $23.29
You Save: $6.63 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 84340-09310
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2017 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Switch Assembly, Stop Lamp
Part Number: 84340-09310
$16.66 MSRP: $23.29
You Save: $6.63 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Stop Lamp; Stoplamp Switch
- Replaces: 84340-09040, 84340-79015, 84340-09070, 84340-09041, 84340-19026, 84340-19025
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60L-GKALKA, 3URFE; USK60L-GKTLKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Switch Assy, Stop Lamp
Part Number: 84340-34010
$77.35 MSRP: $109.04
You Save: $31.69 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Stoplamp Switch
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA

Toyota Sequoia Brake Light Switch

Another important component on the Toyota Sequoia is the Brake Light Switch since it controls the brake lights as well as the pedal is steps on. This mechanism enables the drivers at the rear of the Sequoia of the status of the car, if it is slowing down or has come to a standstill, thus increasing the safety on the roads. Although, there isn't a differentiation of the types or styles of Brake Light Switch for use in different models of Sequoia, the basic functioning stays the same. It is now shocking to note that the performance of the Brake Light Switch plays a significant role to ensure other motorists are informed of the car's state thereby enhancing safety on the road.

If you are in demand for superior quality and affordable OEM Toyota Sequoia Brake Light Switch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sequoia Brake Light Switch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sequoia Brake Light Switch Parts Questions & Experts Answers

Switch Assy, Stop Lamp
84340-09070
Q: What is the location and function of the brake light switch on Toyota Sequoia?
A: The brake light switch is on the brake pedal bracket, under the steering column panel. It controls the brake light circuit. If brake lights fail, check the fuse and bulbs first. If they're okay, check the switch's voltage. No voltage indicates an open circuit between the fuse block and switch. To replace, remove the panel, unplug the connector, rotate the switch counterclockwise, and remove. Install in reverse order.
Switch Assy, Stop Lamp
84340-09070
Q: How to adjust the Brake Light Switch on Toyota Sequoia?
A: First of all, pedal height refers to the brake pedal's distance from the floor. If it's not within the specified range, inspect the brake pedal, pedal arm, mounting bracket, and dash panel for damage. Adjust the brake light switch if necessary. To measure pedal height, start the engine, press the accelerator, and measure with the carpet pulled back and the pedal pad removed. Pedal free-play is the slack before the brake system is engaged. If incorrect, adjust the brake light switch or check the brake system. Pedal reserve height is the pedal's distance from the floor when fully depressed.