How to replace Ignition Coil on Toyota Sequoia?

To disconnect the negative cable from the battery, follow these steps depending on the type of engine. For V6 engines, remove the engine cover, air intake duct, and air filter housing. On 2011 and later models, remove the emission control valve set. For VB engines, remove the throttle body cover and air intake duct. Remove the plastic clips and rubber seal on the left front inner fender well splash shield. Disconnect the air switching valve hoses and unbolt the tube and air switching valve. For 2UZ-FE engines, remove the engine cover, air intake duct, and air filter housing. For 1UR-FE, 3UR-FE, and 3UR-FBE engines, remove the engine cover, air intake duct, and air filter housing. For all models, unscrew the bolt securing each ignition coil/igniter assembly, disconnect the electrical connector, and pull out the assembly. Installation is the reverse of removal.

Genuine Toyota Sequoia Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Ignition Coils found

View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90919-A2005
$89.31 MSRP: $125.89
You Save: $36.58 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition; Coil, Ignition Coil
- Replaces: 90919-02256, 90919-A2003, 90919-02255
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK60L-GKTLKA, 3URFE; USK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90919-02230
$111.31 MSRP: $156.91
You Save: $45.60 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assy, Ignition
- Manufacturer Note: (J)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2004 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90080-19027
$85.89 MSRP: $121.07
You Save: $35.18 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assy, Ignition
- Manufacturer Note: (L)
- Replaced by: 90919-02259
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2010 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA, UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA
View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90919-A2003
$89.31 MSRP: $125.89
You Save: $36.58 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assy, Ignition
- Replaced by: 90919-A2005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFBE, 3URFE; 3URFBE, 3URFE; USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90919-02249
$85.89 MSRP: $121.07
You Save: $35.18 (30%)
ADD TO CART
Product Specifications
- Other Name: Coil Assy, Ignition
- Manufacturer Note: (J)
- Replaced by: 90919-02259
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Ignition Coil Assembly
Part Number: 90919-02250
Product Specifications
- Other Name: Coil Assembly, Ignition
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFBE, 3URFE; 3URFBE, 3URFE; USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA

Toyota Sequoia Ignition Coil

Sequoia Ignition Coil is one of the parts of the Toyota Sequoia that serves the core purpose of the ignition system. Where the low voltage from the battery is the primary circuit and high voltage required to fire the compressed air/fuel mixture in the cylinders is the secondary circuit the ignition coil serves as the transmutation path. Usually, the ignition coil comprises of two coils of copper insulated wire, the primary and the secondary coils, which are wound on an iron core enclosed in a shield casing. Depending on the ignition system that is used the ignition coil can be a part of the distributor ignition system, the coil on plug system, or the coil near plug system. Some of the problems that may be associated with the failure of the ignition coil include; rough idle, poor performance and fuel economy thus requiring one to have the check on this component for enhanced performance of the vehicle.

If you are in demand for superior quality and affordable OEM Toyota Sequoia Ignition Coil, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sequoia Ignition Coil. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sequoia Ignition Coil Parts Questions & Experts Answers

Ignition Coil Assembly
90080-19027
Q: How to replace Ignition Coil on Toyota Sequoia?
A: To disconnect the negative cable from the battery, follow these steps depending on the type of engine. For V6 engines, remove the engine cover, air intake duct, and air filter housing. On 2011 and later models, remove the emission control valve set. For VB engines, remove the throttle body cover and air intake duct. Remove the plastic clips and rubber seal on the left front inner fender well splash shield. Disconnect the air switching valve hoses and unbolt the tube and air switching valve. For 2UZ-FE engines, remove the engine cover, air intake duct, and air filter housing. For 1UR-FE, 3UR-FE, and 3UR-FBE engines, remove the engine cover, air intake duct, and air filter housing. For all models, unscrew the bolt securing each ignition coil/igniter assembly, disconnect the electrical connector, and pull out the assembly. Installation is the reverse of removal.