Is the procedure for removing the instrument panel difficult for the home mechanic on Toyota Sequoia?

An inconvenience in this procedure that makes the home mechanics find it unbearable is that some bolts are obscured, and the metal works require awkward angles, in addition, there are various electrical connectors that require tagging and then disconnected. Therefore it is recommended only for those who have prior experience on their own house repairs. A lot of attention should be paid during the removal of the instrument panel to note the order and position of each component to enable a correct fix. However, it is recommended to remove both front seats, although they are not necessary for working; it gives more working space and less chance of scratching. First, unplug the cable from the negative terminal of battery, then take out the dashboard trim panels, and the center floor console. If mated, remove the driver's side knee airbag connector, remove the mounting bolts of the knee airbag, and then remove the airbag. Then, take out the instrument cluster, glove compartment, as well as the storage box. Pull off the instrument panel lower side and console trim, wrinkles and A-pillar trim panels and then disengage the passenger airbag connector and finally, taking out the audio unit from the panel of the car's dash. Take out the a/c control panel and locate the end cap, unscrew the reinforcement tube mount bolts. Remove the bolts holding the steering column and moved it down off of the instrument panel. Remove several electrical connectors and make sure that they would not be interchanged by using masking tape in labeling the various chords. Pop off the speaker trim covers and the defroster trim panel, and then disconnect the optical sensor's harness connector. Turn all nuts secured with the instrument panel to the body, tilt the panel and draw it backward to extract out along the driver's door opening. If the instrument panel reinforcement tube is also being removed, if any interfering connectors is present they need to be disconnected, the wires harness need to be unplug and the FASTENERS for the tube need to be removed and removal of the tube through the driver's door opening is done. Its removal is in the reverse sequence as installation.

Genuine Toyota Sequoia Instrument Cluster

Speedometer Instrument Cluster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

76 Instrument Clusters found

View related parts
Toyota Sequoia Meter Assembly, Combination
Part Number: 83800-0CP80
$442.46 MSRP: $651.30
You Save: $208.84 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assy, Combination
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2018 Toyota Sequoia | Limited | 8 Cyl 5.7L | 3URFE; 3URFE; USK60L-GKTLKA, USK65L-GKTLKA
View related parts
Toyota Sequoia Meter Assembly, Combination
Part Number: 83800-0CL70
$442.35 MSRP: $651.13
You Save: $208.78 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assy, Combination
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2018 Toyota Sequoia | Platinum | 8 Cyl 5.7L | 3URFE; 3URFE; USK60L-GKTZKA, USK65L-GKTZKA
View related parts
Toyota Sequoia Meter Assembly, Combination
Part Number: 83800-0CC71
$550.54 MSRP: $810.40
You Save: $259.86 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assy, Combination
- Manufacturer Note: REAR SUSPENSION-AIR SUSPENSION
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2010 Toyota Sequoia | Limited, Platinum | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK60L-GKTLKA, UPK65L-GKTLKA, USK60L-GKTLKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Meter Assembly, Combination
Part Number: 83800-0CC10
$1602.48 MSRP: $2358.84
You Save: $756.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assy, Combination; Gauge Cluster, Instrument Cluster
- Manufacturer Note: TOWING PACKAGE-WITH
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Sequoia | SR5 | 8 Cyl 5.7L | 3URFBE, 3URFE; 3URFBE, 3URFE; USK60L-GKTSKA, USK65L-GKTSGA, USK65L-GKTSKA
View related parts
Toyota Sequoia Meter Assembly, Combination
Part Number: 83800-0CC20
$1602.48 MSRP: $2358.84
You Save: $756.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assy, Combination; Gauge Cluster, Instrument Cluster
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Sequoia | SR5 | 8 Cyl 5.7L | 3URFBE, 3URFE; 3URFBE, 3URFE; USK60L-GKTSKA, USK65L-GKTSGA, USK65L-GKTSKA
View related parts
Toyota Sequoia Meter Assembly, Combination
Part Number: 83800-0CC40
$1602.48 MSRP: $2358.84
You Save: $756.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Meter Assy, Combination
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2010 Toyota Sequoia | Limited, Platinum | 8 Cyl 5.7L | 3URFBE, 3URFE; 3URFBE, 3URFE; USK60L-GKTLKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Meter Assembly, COMBINAT
Part Number: 83800-0CJ51
$343.16 MSRP: $492.07
You Save: $148.91 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2015 Toyota Sequoia | SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFE; 1URFE, 3URFE; UPK60L-GKTSKA, USK60L-GKTSKA, USK65L-GKTSKA
View related parts
Toyota Sequoia Case, Combination Meter
Part Number: 83841-0C110
$72.33 MSRP: $101.97
You Save: $29.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Case
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Case, Combination Meter
Part Number: 83842-0C110
$36.40 MSRP: $50.88
You Save: $14.48 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Case, Combination Meter, NO.2; Rear Cover
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia METER ASSY, COMBINAT
Part Number: 83800-0CG50
$363.67 MSRP: $535.31
You Save: $171.64 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2011 Toyota Sequoia | SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFE; 1URFE, 3URFE; UPK60L-GKTSKA, UPK65L-GKTSKA, USK60L-GKTSKA, USK65L-GKTSKA
View related parts
Toyota Sequoia Meter Assembly, COMBINAT
Part Number: 83800-0CU70
$482.48 MSRP: $710.21
You Save: $227.73 (33%)
Product Specifications
- Other Name: Gauge Cluster, Instrument Cluster
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2020 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFE; 3URFE; USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLKA, USK65L-GKTSKA, USK65L-GKTZKA
View related parts
Toyota Sequoia Meter Assembly, COMBINAT
Part Number: 83800-0CV40
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2020 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFE; 3URFE; USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA
View related parts
Toyota Sequoia METER ASSY, COMBINAT
Part Number: 83800-0CU71
Product Specifications
- Other Name: Gauge Cluster, Instrument Cluster
- Manufacturer Note: YAZAKI
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 5.7L | 3URFE; 3URFE; USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLKA, USK65L-GKTSKA, USK65L-GKTZKA
View related parts
Toyota Sequoia Meter Assy, Combination
Part Number: 83800-0C280
Product Specifications
- Other Name: Cluster Assembly, Instrument Cluster
- Manufacturer Note: W(AIR SUSPENSION) & LUXURY PACKAGE
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Sequoia | Limited | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK45L-GKBLKA, UCK45L-GKSLKA
View related parts
Toyota Sequoia Meter Assy, Combination
Part Number: 83800-0C281
Product Specifications
- Other Name: Cluster Assembly, Instrument Cluster
- Manufacturer Note: W(AIR SUSPENSION) & LUXURY PACKAGE
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK45L-GKBLKA
View related parts
Toyota Sequoia Meter Assy, Combination
Part Number: 83800-0C290
Product Specifications
- Other Name: Cluster Assembly, Instrument Cluster
- Manufacturer Note: W(AIR SUSPENSION) & LUXURY PACKAGE
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Sequoia | Limited | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKSLKA
View related parts
Toyota Sequoia Meter Assy, Combination
Part Number: 83800-0C291
Product Specifications
- Other Name: Cluster Assembly, Instrument Cluster
- Manufacturer Note: W(AIR SUSPENSION) & LUXURY PACKAGE
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA
View related parts
Toyota Sequoia Meter Assembly, Combination
Part Number: 83800-0C300
Product Specifications
- Other Name: Meter Assy, Combination
- Manufacturer Note: CANADA SPEC;W(AIR SUSPENSION) & LUXURY PACKAGE
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Sequoia | Limited | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK45L-GKBLKA, UCK45L-GKSLKA
View related parts
Toyota Sequoia Meter Assy, Combination
Part Number: 83800-0C301
Product Specifications
- Manufacturer Note: CANADA SPEC;W(AIR SUSPENSION) & LUXURY PACKAGE
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Sequoia | Limited | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK45L-GKBLKA
View related parts
Toyota Sequoia Meter Assy, Combination
Part Number: 83800-0C310
Product Specifications
- Other Name: Cluster Assembly
- Manufacturer Note: W(AIR SUSPENSION)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2006 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA

| Page 1 of 4 |Next >

1-20 of 76 Results

Toyota Sequoia Instrument Cluster

If you are in demand for superior quality and affordable OEM Toyota Sequoia Instrument Cluster, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sequoia Instrument Cluster. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sequoia Instrument Cluster Parts Questions & Experts Answers

Meter Assy, Combination
83800-0C730
Q: Is the procedure for removing the instrument panel difficult for the home mechanic on Toyota Sequoia?
A: An inconvenience in this procedure that makes the home mechanics find it unbearable is that some bolts are obscured, and the metal works require awkward angles, in addition, there are various electrical connectors that require tagging and then disconnected. Therefore it is recommended only for those who have prior experience on their own house repairs. A lot of attention should be paid during the removal of the instrument panel to note the order and position of each component to enable a correct fix. However, it is recommended to remove both front seats, although they are not necessary for working; it gives more working space and less chance of scratching. First, unplug the cable from the negative terminal of battery, then take out the dashboard trim panels, and the center floor console. If mated, remove the driver's side knee airbag connector, remove the mounting bolts of the knee airbag, and then remove the airbag. Then, take out the instrument cluster, glove compartment, as well as the storage box. Pull off the instrument panel lower side and console trim, wrinkles and A-pillar trim panels and then disengage the passenger airbag connector and finally, taking out the audio unit from the panel of the car's dash. Take out the a/c control panel and locate the end cap, unscrew the reinforcement tube mount bolts. Remove the bolts holding the steering column and moved it down off of the instrument panel. Remove several electrical connectors and make sure that they would not be interchanged by using masking tape in labeling the various chords. Pop off the speaker trim covers and the defroster trim panel, and then disconnect the optical sensor's harness connector. Turn all nuts secured with the instrument panel to the body, tilt the panel and draw it backward to extract out along the driver's door opening. If the instrument panel reinforcement tube is also being removed, if any interfering connectors is present they need to be disconnected, the wires harness need to be unplug and the FASTENERS for the tube need to be removed and removal of the tube through the driver's door opening is done. Its removal is in the reverse sequence as installation.