How to remove and install the front stabilizer bar and bushing on Toyota Sequoia?

Lift the vehicle and secure on jackstands. Detach the sway bar kit links and remove them from the bar and lower control arms. Remove the sway bar kit and its sway bar bushings. Inspect sway bar bushings for damage and replace if needed. Check the balljoint on each link for wear. Test the balljoint's rotational torque with a torque wrench. When reinstalling, position sway bar bushings with slits facing the vehicle's front. Follow the reverse process of removal for installation. Ensure all fasteners are tightened.

Genuine Toyota Sequoia Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Sway Bar Bushings found

View related parts
Toyota Sequoia Bush, Front STABILIZER Bar
Part Number: 48815-AF030
$24.19 MSRP: $33.82
You Save: $9.63 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1; Bushing, Stabilizer Bar Bushing
- Manufacturer Note: W(REAR STABILIZER)
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Bush, Front STABILIZER Bar
Part Number: 48815-0C050
$22.75 MSRP: $31.81
You Save: $9.06 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1; Bushing, Stabilizer Bar Bushing
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Bush, STABILIZER
Part Number: 48815-06080
$10.12 MSRP: $14.14
You Save: $4.02 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1; Bushing, Stabilizer Bar Bushing
- Manufacturer Note: OD=23
- Comment: (FOR REAR)
- Replaces: 48815-33090
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA, UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Bush, Stabilizer, Rear
Part Number: 48818-AF010
$20.00 MSRP: $27.96
You Save: $7.96 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Manufacturer Note: W(SUN ROOF)
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Bush, Stabilizer, Rear
Part Number: 48818-AF020
$20.00 MSRP: $27.96
You Save: $7.96 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Stabilizer Bar Bushing
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Bush, Front STABILIZER Bar
Part Number: 48815-AF040
$20.74 MSRP: $28.99
You Save: $8.25 (29%)
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1; Bushing, Stabilizer Bar Bushing
- Manufacturer Note: W(AIR SUSPENSION)
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA

Toyota Sequoia Sway Bar Bushing

The Sway Bar Bushing in Toyota Sequoia vehicles is important in the stability and maneuvering of the car through appropriate fixing of the sway bar. Often, these bushings deteriorate and cause the sway bar to become loose and extend the risks and reduced performance of the car. Since there are different models of the Toyota Sequoia over the years, it is possible that several designs of the Sway Bar Bushing have been implemented with separate feature and characteristic. These bushings must also be checked often as well as replaced as necessary so as to get the optimal when riding the car as well as ensuring safety while on the road.

If you are in demand for superior quality and affordable OEM Toyota Sequoia Sway Bar Bushing, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sequoia Sway Bar Bushing. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sequoia Sway Bar Bushing Parts Questions & Experts Answers

Bush, STABILIZER
48815-06080
Q: How to remove and install the front stabilizer bar and bushing on Toyota Sequoia?
A: Lift the vehicle and secure on jackstands. Detach the sway bar kit links and remove them from the bar and lower Control Arms. Remove the sway bar kit and its sway bar bushings. Inspect sway bar bushings for damage and replace if needed. Check the balljoint on each link for wear. Test the balljoint's rotational torque with a torque wrench. When reinstalling, position sway bar bushings with slits facing the vehicle's front. Follow the reverse process of removal for installation. Ensure all fasteners are tightened.