How do you remove the steering gear assembly on a Toyota Sienna?

To remove the rack and pinion assembly, first park the vehicle with the front wheels straight and remove the wheels, engine under covers (if applicable), and power steering pressure and return lines. Mark the relationship of the lower universal joint to the rack and pinion input shaft, remove the lower intermediate shaft pinch bolt, and separate the Tie Rod End from the steering knuckle arms. Remove the stabilizer bar bushing retainer bolts and lift the stabilizer bar to access the rack and pinion mounting nuts. Knock out the mounting bolts and pull the rack and pinion assembly out from the left side. Check the mounting grommets for wear and replace them if necessary. To install, raise the rack and pinion into position, connect the U-joint, and install the mounting bolts and nuts. Connect the tie-rod ends, U-joint pinch bolt, and power steering hoses, and refill the power steering pump reservoir with the recommended fluid. Reattach the bracket to the top of the rack and pinion assembly.

Genuine Toyota Sienna Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Rack And Pinions found

View related parts
Toyota Sienna Power Steering Gear Assembly(For Rack & Pinion)
Part Number: 44250-08040
$486.68 MSRP: $715.97
You Save: $229.29 (33%)
ADD TO CART
Product Specifications
- Other Name: Gear Assy, Power Steering(For Rack & Pinion)
- Comment: (FOR RACK & PINION)
- Replaced by: 44250-08041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2010 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Steering Gear Assembly
Part Number: 45510-08020
$509.26 MSRP: $749.63
You Save: $240.37 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering; Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2020 Toyota Sienna | LE, SE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 2GRFKS; 1ARFE, 2GRFE, 2GRFKS; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Power Steering Gear Assembly(For Rack & Pinion)
Part Number: 44250-08030
$486.68 MSRP: $715.97
You Save: $229.29 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assy, Power Steering(For Rack & Pinion)
- Comment: (FOR RACK & PINION)
- Replaced by: 44250-08041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004 Toyota Sienna | CE, LE, XLE | 6 Cyl 3.3L | 3MZFE; 3MZFE; MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Steering Gear Assembly
Part Number: 45510-08010
$509.26 MSRP: $749.63
You Save: $240.37 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Steering; Gear Assembly, Steering Gear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2020 Toyota Sienna | LE, SE, STD, XLE | 6 Cyl 3.5L | 2GRFE, 2GRFKS; 2GRFE, 2GRFKS; GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SBTDKA, GSL33L-SBZDHA, GSL33L-SEZDHA
View related parts
Toyota Sienna Gear Assy, Electric
Part Number: 44250-08080
$650.19 MSRP: $956.86
You Save: $306.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Rack
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; A25AFXS; AXLH40L-PNXLHA, AXLH40L-PNXXHA, AXLH40L-PPXEHA, AXLH40L-PPXXHA, AXLH45L-PNXLHA, AXLH45L-PNXXHA, AXLH45L-PPXEHA
View related parts
Toyota Sienna Power Steering Rack Sub-Assembly
Part Number: 44204-08010
$320.72 MSRP: $459.89
You Save: $139.17 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rack Sub-Assy, Power Steering; Rack
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2003 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
View related parts
Toyota Sienna Gear Assy, Electric
Part Number: 44250-08090
$650.19 MSRP: $956.86
You Save: $306.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rack
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; A25AFXS; AXLH40L-PNXLHA
View related parts
Toyota Sienna Gear Assy, Electric
Part Number: 44250-08100
$650.19 MSRP: $956.86
You Save: $306.67 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Rack
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; A25AFXS; AXLH45L-PNXSHA
View related parts
Toyota Sienna Power Steering Gear Assembly(For Rack & Pinion)
Part Number: 44250-08020
$631.25 MSRP: $928.99
You Save: $297.74 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assy, Power Steering(For Rack & Pinion); Gear Assembly, Steering Gear
- Comment: (FOR RACK & PINION)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
View related parts
Toyota Sienna Gear Assembly,Power STEE
Part Number: 44250-08110
$687.82 MSRP: $1012.24
You Save: $324.42 (33%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Rack
- Manufacturer Note: *614
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; A25AFXS; AXLH40L-PNXSHA
View related parts
Toyota Sienna Power Steering Gear Assembly(For Rack & Pinion)
Part Number: 44250-08010
Product Specifications
- Other Name: Gear Assy, Power Steering(For Rack & Pinion); Gear Assembly, Steering Gear
- Comment: (FOR RACK & PINION)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2001 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK

Toyota Sienna Rack And Pinion

The Toyota Sienna Rack And Pinion is a critical part that transforms the rotary movement generated by the driver when turning the steering wheel into linear motion of the front wheels. This mechanism is called the rack and pinion; it is made of gears positioned in a metal tube which is fixed on the car's chassis. This is a part of the steering system where there is a transmitting shaft from the steering wheel and the pinion gear is engaged to the rack gear which is housed in the tube and by the turning of the pinion gear the rack gear is forced towards the required direction hence steering of the vehicle. Present day Sienna cars employ power assist, where rack and pinion mechanisms are employed and are assisted by hydraulics by way of fluid pressure. Problems related to the Steering Rack may include; spoilt seals, leaks or worn gears, the likely symptoms may include; stiff steering, grinding sounds or wandering. If the steering wheel shakes unusually or is loose, or the car has a tendency to veer left or right on a calm road, then it AutoPro may recommend that you get a new rack and pinion assembly. Still, the rack and pinion system in Toyota Sienna vehicles is crucial for steering and having a good feel of the road without being affected by the problem highlighted above.

If you are in demand for superior quality and affordable OEM Toyota Sienna Rack And Pinion, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sienna Rack And Pinion. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sienna Rack And Pinion Parts Questions & Experts Answers

Power Steering Gear Assembly(For Rack & Pinion)
44250-08040
Q: How do you remove the steering gear assembly on a Toyota Sienna?
A: To remove the rack and pinion assembly, first park the vehicle with the front wheels straight and remove the wheels, engine under covers (if applicable), and power steering pressure and return lines. Mark the relationship of the lower universal joint to the rack and pinion input shaft, remove the lower intermediate shaft pinch bolt, and separate the Tie Rod End from the steering knuckle arms. Remove the stabilizer bar bushing retainer bolts and lift the stabilizer bar to access the rack and pinion mounting nuts. Knock out the mounting bolts and pull the rack and pinion assembly out from the left side. Check the mounting grommets for wear and replace them if necessary. To install, raise the rack and pinion into position, connect the U-joint, and install the mounting bolts and nuts. Connect the tie-rod ends, U-joint pinch bolt, and power steering hoses, and refill the power steering pump reservoir with the recommended fluid. Reattach the bracket to the top of the rack and pinion assembly.