Genuine Toyota Solara Mirror Switch

Toyota Solara Mirror Switch Parts Questions & Experts Answers

• Switch Assy, Outer Mirror
  84870-06020
  Q: How do you replace hazard warning switch, power mirror control switch, defogger control switch, and instrument panel light control switch on Toyota Solara?

  A: To replace the hazard warning switch disconnect the negative battery cable. Then, remove the center cluster finish panel from the instrument panel and the electrical connector at the rear of the switch. The location of the hazard switch may vary depending on the model. Next, remove the switch from the bezel. The hazard switch is important to the heating/air conditioning controls and must be replaced as a unit for Camry models. To replace the Mirror Switch, locate the switch in a small panel to the left of the steering column or the driver's door panel and then, pry the panel from the dash or the switch from the door panel, then remove the electrical connector and the switch. For the replacement of the defogger control switch, remove the heating and air conditioning control panel and disconnect the electrical connector, depress the tab, and remove the switch from the bezel. For the instrument panel light control switch, remove the instrument cluster or the small removable panel to the left of the steering column, depending on the model. Disconnect the electrical connector and remove the switch by squeezing the clips. Installation for all switches is the reverse of the removal procedure.