×
- Live Chat
- 1-888-905-9199
My Garage
My Account
Cart
Genuine Toyota Solara Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
14 Throttle Bodies found
Toyota Solara Electronic Throttle Body
Part Number: 22030-0H020$348.11 MSRP: $512.41You Save: $164.30 (33%)Ships in 1-2 Business Days
Toyota Solara Fuel Injection Throttle Body W/Motor
Part Number: 22030-0H010$348.11 MSRP: $512.41You Save: $164.30 (33%)Ships in 1-2 Business Days
Toyota Solara Throttle Body Assembly
Part Number: 22030-20060$348.11 MSRP: $512.41You Save: $164.30 (33%)Ships in 1-3 Business Days
Toyota Solara Throttle Body Assembly W/Motor
Part Number: 22030-0H030$314.53 MSRP: $451.01You Save: $136.48 (31%)Ships in 1 Business Day
Toyota Solara Throttle Body Assembly
Part Number: 22210-20060$365.79 MSRP: $538.44You Save: $172.65 (33%)Ships in 1-3 Business Days
Toyota Solara Throttle Body Assembly
Part Number: 22030-0A020$348.86 MSRP: $513.53You Save: $164.67 (33%)Ships in 1-3 Business DaysToyota Solara Throttle Body Assembly
Part Number: 22210-03080$363.00 MSRP: $534.33You Save: $171.33 (33%)Ships in 1-3 Business DaysToyota Solara Throttle Body Assembly
Part Number: 22210-7A380$363.00 MSRP: $534.33You Save: $171.33 (33%)Ships in 1-3 Business Days
Toyota Solara Throttle Body
The Throttle Body of Toyota Solara vehicles is a pivotal organator of airflow into the engine in compliance to the signal by the accelerator. Located between the air cleaner, and the intake manifold is the Throttle Body which is fitted with a butterfly valve that can open or close to allow the desired quantity of air. Holds the earlier Throttle Body Injection (TBI) that is simpler than the modern intaken multi-port fuel injection systems where deliveries are made separately from the throttle body. Mechanical linkage has mostly been replaced by Electronic Throttle Control (ETC) as the latter has greater reliability and is compatible with other safety systems. Actually, unlike carbs, throttle bodies are relatively trouble-free, but they might need servicing or even replacement because of wear and deposit accumulation.
If you are in demand for superior quality and affordable OEM Toyota Solara Throttle Body, then shop with us! We own a wide range of the reduced-priced genuine Toyota Solara Throttle Body. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota Solara Throttle Body Parts Questions & Experts Answers
- Q: How to verify and clean the throttle linkage and throttle body on 2002 through 2008 Toyota Solara?A: Check the throttle linkage and remove the air intake duct from the throttle body. Don't clean the Throttle Position Sensor (TPS) or Idle Air Control (IAC) valve with solvent. Disconnect the battery's negative terminal, remove the air intake duct, and disconnect the throttle body's connector. Label and detach all hoses from the throttle body, plugging the coolant ones. On V6 models, disconnect the TPS's connector. Remove the throttle body and gasket. Reinstall in reverse order, using a new gasket.
- Q: How to ensure proper functioning of the throttle body on 1997 through 2001 Toyota Solara?A: To ensure the proper functioning of the throttle system, perform the following checks and maintenance procedures. Verify that the throttle linkage operates smoothly and examine the vacuum at each port on the throttle body by detaching vacuum hoses and using your finger to compare observations with the vacuum table. Additionally, inspect the air intake duct for carbon and residue build-up and clean it with aerosol carburetor cleaner, ensuring it is safe for oxygen sensor systems and catalytic converters. For removal procedures on specific models, follow these steps accordingly. First, relieve the fuel system pressure and disconnect the negative battery cable. Remove the air intake duct by loosening the hose clamps and detaching the accelerator cable from the throttle lever. If applicable, disconnect the throttle valve cable for vehicles with automatic transmissions. Label and detach all vacuum and coolant hoses from the throttle body, plugging coolant hoses to prevent leakage. Disconnect the electrical connector from the Throttle Position Sensor (TPS) and remove the throttle body mounting nuts/bolts to detach the throttle body and gasket from the intake manifold. For installation, reverse the removal steps and use a new gasket between the throttle body and intake manifold. Ensure proper tightening of the throttle body mounting bolts to the specified torque and check and adjust the coolant level as needed. In the case of removal on the Avalon model, remove the V-bank cover, intake duct, and resonator. Disconnect the accelerator cable and remove the bolt securing the throttle body to the throttle body bracket. Disconnect electrical connectors, wire harness clamps, and the brake booster vacuum hose. Disconnect coolant bypass hoses, air assist hoses, fuel vapor feed hoses, and vacuum hoses from the throttle body, plugging coolant hoses. Remove the nuts securing the No. 1 intake air control valve to the air intake plenum. Throttle body detachment is not necessary unless replacement is required. For installation, balance the two throttle bodies, use new gaskets between the No. 1 intake air control valve and intake plenum, and tighten the retaining nuts to the specified torque. Check and adjust the coolant level as needed. For adjustment, apply vacuum to the throttle opener, measure clearances between adjusting screws and throttle lever, and ensure correct clearances. Adjust the screws as necessary, following the specified steps. Finally, fully install the throttle body/No. 1 intake air control valve assembly.
