How to replace brake pads on 1995 through 2004 Toyota Tacoma?

To replace the Brake Pad Set, start by loosening the front wheel lug nuts and raising the front of the vehicle on jackstands. Remove the wheels and discard about two-thirds of the fluid from the master cylinder reservoir. Position a drain pan under the brake assembly and clean the Brake Caliper and surrounding area with brake system cleaner. On 2WD pick-up models, depress the piston into its bore using a C-clamp, making sure the fluid in the master cylinder doesn't overflow. Wash the disc and brake pads with brake cleaner and work on one brake assembly at a time. For 4WD pick-up models and all 4Runner models, follow the accompanying photos and detach the pin retaining clip after washing the brake assembly. While the pads are removed, inspect the caliper for leaks and damage, replacing it if necessary. Also, inspect the brake disc and remove it if machining is needed. Clean and check the caliper mounting bolt before installing it. Install the brake pads on the opposite wheel, then install the wheels and lower the vehicle. Add brake fluid to the reservoir and pump the brakes to seat the pads against the disc. Finally, check the operation of the brakes before driving the vehicle in traffic, avoiding heavy brake applications until the pads have been seated.

How to replace brake pads on fixed and floating calipers on 2005 through 2009 Toyota Tacoma?

To replace Brake Caliper on different models, follow these guidelines. For 4WD and Prerunner models with fixed calipers, start by removing two-thirds of the brake fluid from the reservoir, loosening the wheel lug nuts, and raising the vehicle. Position a drain pan under the caliper assembly and clean it with a brake system cleaner. Inspect the brake disc, remove retaining clips from pad pins, release the anti-rattle spring from each brake pad plate, and remove the pad pins and anti-rattle spring. Depress the pistons into their bores by squeezing the outboard brake pad against the caliper and removing the outboard brake pad. Clean brake pad plate contact surfaces and lubricate the back of the new brake pad with high-temperature brake grease. Install an anti-squeal shim and the outboard brake pad set. Repeat this process for the inboard brake pad, cleaning, lubricating, and installing correctly. Inspect pad pins, pin clips, and anti-rattle springs for wear or damage and replace them if necessary. Reinstall pad pins, anti-rattle springs, and pin clips. Install the wheel, lower the vehicle, tighten lug nuts, apply and release the brake pedal several times to bring pads into contact with brake discs, and check brake fluid level. For 2WD models with floating calipers, push the piston back into the bore to create space for the new brake pads, detach the Brake Line from the shock absorber bracket and remove the caliper lower mounting bolt. Pivot the caliper and secure it with a wire to prevent damage to the flexible brake hose. Remove the pads and pad support plates. Clean the caliper mounting bracket, inspect the lower slide pin, apply high-temperature brake grease to it, and reinstall it. Clean and lubricate the upper sliding pin, install clean pad support plates, lubricate the back of each pad, and install clean anti-squeal shims and pad wear indicators. Pivot the caliper back, and reinstall the lower mounting bolt, wheel, and lug nuts. Lower the vehicle, tighten lug nuts, and perform brake pedal operation. Finally, check the brake fluid level and test the brakes before driving.

Genuine Toyota Tacoma Brake Pad Set

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Brake Pad Sets found

View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04465-04070
$74.93 MSRP: $104.50
You Save: $29.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front; Brake Pads, Front Pads
- Manufacturer Note: MARK ADVICS PS558H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2016 Toyota Tacoma | Base, SR5 | 4 Cyl 2.7L, 6 Cyl 4.0L | 1GRFE, 2TRFE; 1GRFE, 2TRFE; GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04465-04080
$82.47 MSRP: $115.02
You Save: $32.55 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front; Brake Pads, Front Pads
- Manufacturer Note: MARK ADVICS PS558H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2016 Toyota Tacoma | Base | 4 Cyl 2.7L, 6 Cyl 4.0L | 1GRFE, 2TRFE; 1GRFE, 2TRFE; GRN225L-CRFDKA, TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA
View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04465-35280
$75.74 MSRP: $105.63
You Save: $29.89 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front; Brake Pads, Front Pads
- Position: Front
- Replaces: 04465-35080, 04491-35260, 04465-04010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2004 Toyota Tacoma | DLX | 6 Cyl 3.4L | 5VZFE; 5VZFE; VZN170L-CRMDKAB, VZN170L-CRPDKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
- 1995-1999 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN196L-CRPDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN195L-CRPDKAB
View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04465-35080
$75.74 MSRP: $105.63
You Save: $29.89 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front
- Manufacturer Note: (J)
- Position: Front
- Replaced by: 04465-35280
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1999 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN196L-CRPDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN195L-CRPDKAB
View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04465-04040
$75.74 MSRP: $105.63
You Save: $29.89 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front; Brake Pads, Front Pads
- Manufacturer Note: MARK SUMITOMO PS558H
- Position: Front
- Replaces: 04465-04020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2004 Toyota Tacoma | DLX | 4 Cyl 2.4L, 6 Cyl 3.4L | 2RZFE, 5VZFE; 2RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB
View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04465-35070
$53.18 MSRP: $74.37
You Save: $21.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front; Brake Pads, Front Pads
- Position: Front
- Replaces: 04491-35270
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1999 Toyota Tacoma | DLX | 4 Cyl 2.4L, 6 Cyl 3.4L | 2RZFE, 5VZFE; 2RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRSDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB
View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04465-04020
$75.74 MSRP: $105.63
You Save: $29.89 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front
- Manufacturer Note: MARK SUMITOMO PS545
- Position: Front
- Replaced by: 04465-04040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2002 Toyota Tacoma | DLX | 4 Cyl 2.4L, 6 Cyl 3.4L | 2RZFE, 5VZFE; 2RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB
View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04491-35270
$53.18 MSRP: $74.37
You Save: $21.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front
- Position: Front
- Replaced by: 04465-35070
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1996 Toyota Tacoma | DLX | 4 Cyl 2.4L, 6 Cyl 3.4L | 2RZFE, 5VZFE; 2RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRSDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB
View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04465-04010
$75.74 MSRP: $105.63
You Save: $29.89 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front
- Manufacturer Note: (L)
- Position: Front
- Replaced by: 04465-35280
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1996-1999 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN196L-CRPDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN195L-CRPDKAB
View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04465-04030
$75.74 MSRP: $105.63
You Save: $29.89 (29%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front
- Manufacturer Note: MARK SUMITOMO PS545
- Position: Front
- Replaced by: 04465-04050
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2003 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Front Disc Brake Pad Kit
Part Number: 04465-04050
$75.74 MSRP: $105.63
You Save: $29.89 (29%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front; Brake Pads, Front Pads
- Manufacturer Note: MARK ADVICS PS558H
- Position: Front
- Replaces: 04465-04030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2004 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Front Disc Brake Pad Kit
Part Number: 04465-04090
$74.93 MSRP: $104.50
You Save: $29.57 (29%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front; Brake Pads, Front Pads
- Manufacturer Note: MARK ADVICS VC070H
- Position: Front
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2015-2022 Toyota Tacoma | Base, Limited, SR5 | 4 Cyl 2.7L, 6 Cyl 3.5L | 2GRFKS, 2TRFE; 2GRFKS, 2TRFE; GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Front Disc Brake Pad Set
Part Number: 04491-35260
$75.74 MSRP: $105.63
You Save: $29.89 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Disc Brake, Front
- Position: Front
- Replaced by: 04465-35280
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-1996 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB

Toyota Tacoma Brake Pad Set

TOYOTA TACOMA BRAKE PAD SET are other components in the brake system of the vehicles and help to slow down or stop the vehicle by pressure application on the brake drums through friction. These pads incorporate a friction material with a metal base plate on to which the friction material is bonded and this experiences wear and tear and thus need to be renewed from time to time. Vehicles built in Tacoma may be fitted with wear sensors or wear indicators that provide feedback on the remaining thickness of the pads to guide the drivers on when to visit the shops for their vehicles to be serviced. Different kinds of Brake Pad Set have been used on Toyota Tacoma over the years and these include the non-metallic, semi metallic, fully metallic and ceramic brake pads. All the types provide a variation of the frictional characteristics, wear, and tear characteristics as well as noise characteristics. Brake pad installation and the correct hardware that comes with it which include clips and springs are fundamental to the most efficiency and durability of the brake pad due to the elimination of noises and arbitrary wear.

If you are in demand for superior quality and affordable OEM Toyota Tacoma Brake Pad Set, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tacoma Brake Pad Set. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Tacoma Brake Pad Set Parts Questions & Experts Answers

Front Disc Brake Pad Set
04465-04010
Q: How to replace brake pads on 1995 through 2004 Toyota Tacoma?
A: To replace the Brake Pad Set, start by loosening the front wheel lug nuts and raising the front of the vehicle on jackstands. Remove the wheels and discard about two-thirds of the fluid from the master cylinder reservoir. Position a drain pan under the brake assembly and clean the Brake Caliper and surrounding area with brake system cleaner. On 2WD pick-up models, depress the piston into its bore using a C-clamp, making sure the fluid in the master cylinder doesn't overflow. Wash the disc and brake pads with brake cleaner and work on one brake assembly at a time. For 4WD pick-up models and all 4Runner models, follow the accompanying photos and detach the pin retaining clip after washing the brake assembly. While the pads are removed, inspect the caliper for leaks and damage, replacing it if necessary. Also, inspect the Brake Disc and remove it if machining is needed. Clean and check the caliper mounting bolt before installing it. Install the brake pads on the opposite wheel, then install the wheels and lower the vehicle. Add brake fluid to the reservoir and pump the brakes to seat the pads against the disc. Finally, check the operation of the brakes before driving the vehicle in traffic, avoiding heavy brake applications until the pads have been seated.
Front Disc Brake Pad Set
04465-04070
Q: How to replace brake pads on fixed and floating calipers on 2005 through 2009 Toyota Tacoma?
A: To replace Brake Caliper on different models, follow these guidelines. For 4WD and Prerunner models with fixed calipers, start by removing two-thirds of the brake fluid from the reservoir, loosening the wheel lug nuts, and raising the vehicle. Position a drain pan under the caliper assembly and clean it with a brake system cleaner. Inspect the Brake Disc, remove retaining clips from pad pins, release the anti-rattle spring from each brake pad plate, and remove the pad pins and anti-rattle spring. Depress the pistons into their bores by squeezing the outboard brake pad against the caliper and removing the outboard brake pad. Clean brake pad plate contact surfaces and lubricate the back of the new brake pad with high-temperature brake grease. Install an anti-squeal shim and the outboard brake pad set. Repeat this process for the inboard brake pad, cleaning, lubricating, and installing correctly. Inspect pad pins, pin clips, and anti-rattle springs for wear or damage and replace them if necessary. Reinstall pad pins, anti-rattle springs, and pin clips. Install the wheel, lower the vehicle, tighten lug nuts, apply and release the brake pedal several times to bring pads into contact with brake discs, and check brake fluid level. For 2WD models with floating calipers, push the piston back into the bore to create space for the new brake pads, detach the Brake Line from the shock absorber bracket and remove the caliper lower mounting bolt. Pivot the caliper and secure it with a wire to prevent damage to the flexible brake hose. Remove the pads and pad support plates. Clean the caliper mounting bracket, inspect the lower slide pin, apply high-temperature brake grease to it, and reinstall it. Clean and lubricate the upper sliding pin, install clean pad support plates, lubricate the back of each pad, and install clean anti-squeal shims and pad wear indicators. Pivot the caliper back, and reinstall the lower mounting bolt, wheel, and lug nuts. Lower the vehicle, tighten lug nuts, and perform brake pedal operation. Finally, check the brake fluid level and test the brakes before driving.