How do you remove and install leaf springs and Leaf Spring Shackle on 2005 through 2009 Toyota Tacoma?

Raise the rear of the vehicle and support it securely on jackstands placed under the frame rails, ensuring the front wheels are blocked to prevent rolling. Use a floor jack to support the rear axle, relieving tension on the leaf springs. Detach the shock absorber from the rear axle housing for 4WD or PreRunner models, or from the spring seat for 2WD models. Remove the parking brake cable bracket from the spring, followed by the four U-bolt fasteners, the spring seat, and U-bolts. For 2WD models, support the leaf spring to prevent it from falling when the through-bolt is removed. Next, remove the rear leaf spring shackle-to-frame nut, support the leaf spring, and withdraw the through-bolt, carefully removing the spring. If the bushings at the ends of the spring are worn, an automotive machine shop can replace them, and it is important to inspect and replace the spring bumpers as needed. Installation follows the reverse order of removal, with U-bolt nuts tightened gradually in a criss-cross pattern to ensure equal thread visibility. Finally, tighten the mounting fasteners at the end of the leaf spring and secure the parking brake cable bracket, ensuring that the front and rear leaf spring fasteners are tightened with the vehicle at normal ride height after assembly and a few bounces.

Genuine Toyota Tacoma Leaf Spring Shackle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Leaf Spring Shackles found

View related parts
Toyota Tacoma Shackle Kit, Rear Spring
Part Number: 04483-04080
$101.00 MSRP: $142.37
You Save: $41.37 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Replaced by: 04483-04081
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2018 Toyota Tacoma | Base, Limited, SR5 | 4 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 4.0L | 1GRFE, 2GRFKS, 2TRFE; 1GRFE, 2GRFKS, 2TRFE; GRN225L-CRFDKA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA, GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA, TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Shackle Kit, Rear Spring
Part Number: 04483-04040
$92.39 MSRP: $130.24
You Save: $37.85 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shackle Kit, Rear Spring, LH; Shackle
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2001 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN160L-TRMDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Shackle Kit, Rear Spring
Part Number: 04483-04081
$101.00 MSRP: $142.37
You Save: $41.37 (30%)
ADD TO CART
Product Specifications
- Other Name: SHACKLE Kit, Rr SPRI; Shackle
- Position: Rear
- Replaces: 04483-04080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2022 Toyota Tacoma | Base, Limited, SR5 | 4 Cyl 2.7L, 6 Cyl 3.5L, 6 Cyl 4.0L | 1GRFE, 2GRFKS, 2TRFE; 1GRFE, 2GRFKS, 2TRFE; GRN225L-CRFDKA, 2TRFE; GRN305L-CRFSHA, GRN245L-CRADKA, GRN245L-CRFDKA, GRN245L-PRADKA, GRN245L-PRFDKA, GRN250L-PRADKA, GRN265L-CRADKA, GRN265L-CRFDKA, GRN265L-PRADKA, GRN270L-PRADKA, GRN305L-CRFSHA, GRN305L-CRTSHA, GRN305L-PRFSHA, GRN305L-PRTLHA, GRN305L-PRTSHA, GRN310L-PRTLHA, GRN310L-PRTSHA, GRN325L-CRTSHA, GRN325L-PRTLHA, GRN325L-PRTSHA, GRN330L-PRTLHA, GRN330L-PRTSHA, TRN220L-TRMDKA, TRN220L-TRPDKA, TRN225L-CRMDKA, TRN225L-CRPDKA, TRN225L-PRPDKA, TRN240L-TRMDKA, TRN240L-TRPDKA, TRN245L-CRMDKA, TRN245L-CRMSKA, TRN245L-CRPDKA, TRN245L-CRTSKA, TRN260L-TRMDKA, TRN265L-CRMDKA, TRN265L-CRPDKA, TRN265L-CRTSKA, TRN265L-PRPDKA, TRN265L-PRTSKA
View related parts
Toyota Tacoma Shackle Kit, Rear Spring
Part Number: 04483-04050
$142.45 MSRP: $202.51
You Save: $60.06 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shackle Kit, Rear Spring, RH; Shackle
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Tacoma | DLX | 4 Cyl 2.4L, 6 Cyl 3.4L | 2RZFE, 5VZFE; 2RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB
View related parts
Toyota Tacoma Shackle Kit, Rear Spring
Part Number: 04483-04060
$123.26 MSRP: $175.24
You Save: $51.98 (30%)
Product Specifications
- Other Name: Shackle Kit, Rear Spring, LH
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2004 Toyota Tacoma | DLX, SR5 | 4 Cyl 2.7L, 6 Cyl 3.4L | 3RZFE, 5VZFE; 3RZFE, 5VZFE; RZN161L-TRMDKAB, RZN161L-TRPDKAB, RZN171L-CRMDKAB, RZN171L-CRPDKAB, RZN191L-TRPDKAB, RZN196L-CRPDKAB, RZN196L-PRPDKAB, VZN170L-CRMDKAB, VZN170L-CRMGKAB, VZN170L-CRPDKAB, VZN170L-CRPGKAB, VZN170L-PRPDKAB, VZN195L-CRPDKAB, VZN195L-PRPDKAB
View related parts
Toyota Tacoma Shackle Kit, Rear Spring
Part Number: 04483-04030
Product Specifications
- Other Name: Shackle Kit, Rear Spring, LH; Shackle
- Position: Rear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2001 Toyota Tacoma | DLX | 4 Cyl 2.4L, 6 Cyl 3.4L | 2RZFE, 5VZFE; 2RZFE, 5VZFE; RZN140L-TRMDKAB, RZN140L-TRPDKAB, RZN140L-TRSDKAB, RZN150L-CRMDKAB, RZN150L-CRPDKAB, RZN150L-CRSDKAB, VZN150L-CRMDKAB, VZN150L-CRSDKAB

Toyota Tacoma Leaf Spring Shackle

If you are in demand for superior quality and affordable OEM Toyota Tacoma Leaf Spring Shackle, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tacoma Leaf Spring Shackle. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Tacoma Leaf Spring Shackle Parts Questions & Experts Answers

Shackle Kit, Rear Spring
04483-04080
Q: How do you remove and install leaf springs and Leaf Spring Shackle on 2005 through 2009 Toyota Tacoma?
A: Raise the rear of the vehicle and support it securely on jackstands placed under the frame rails, ensuring the front wheels are blocked to prevent rolling. Use a floor jack to support the rear axle, relieving tension on the leaf springs. Detach the Shock Absorber from the rear axle housing for 4WD or PreRunner models, or from the spring seat for 2WD models. Remove the parking brake cable bracket from the spring, followed by the four U-bolt fasteners, the spring seat, and U-bolts. For 2WD models, support the leaf spring to prevent it from falling when the through-bolt is removed. Next, remove the rear leaf spring shackle-to-frame nut, support the leaf spring, and withdraw the through-bolt, carefully removing the spring. If the bushings at the ends of the spring are worn, an automotive machine shop can replace them, and it is important to inspect and replace the spring bumpers as needed. Installation follows the reverse order of removal, with U-bolt nuts tightened gradually in a criss-cross pattern to ensure equal thread visibility. Finally, tighten the mounting fasteners at the end of the leaf spring and secure the parking brake cable bracket, ensuring that the front and rear leaf spring fasteners are tightened with the vehicle at normal ride height after assembly and a few bounces.