How to operate and remove/install a power brake booster on Toyota Tundra?

Depress the brake pedal several times with the engine off and make sure there's no change in the pedal reserve distance. Depress the pedal and start the engine. If the pedal goes down slightly, operation is normal. Airtightness check: Start the engine and turn it off after one or two minutes. Depress the brake pedal slowly several times. If the pedal depresses less each time, the booster is airtight. Depress the brake pedal while the engine is running, then stop the engine with the pedal depressed. If there's no change in the pedal reserve travel after holding the pedal for 30 seconds, the booster is airtight. Removal: Power brake booster units shouldn't be disassembled. They require special tools not normally found in most automotive repair stations or shops. Because of its critical relationship to brake performance, the booster should be replaced with a new or rebuilt one. Disconnect the electrical connectors from the booster. Disconnect the vacuum hose leading from the engine to the booster. Be careful not to damage the hose when removing it from the booster fitting. Remove the brake master cylinder. Remove the left side lower finish panel from the instrument panel. Locate the pushrod clevis connecting the booster to the brake pedal. Remove the clevis pin retaining clip with pliers and pull out the pin. Remove the four nuts holding the brake booster to the firewall; you may need a light to see them. Slide the booster straight out from the firewall until the studs clear the holes. Installation: Installation procedures are basically the reverse of removal. Make sure the clevis pin retaining clip is fully seated. After the final installation of the master cylinder and brake lines, the system must be bled and the brake pedal height and freeplay must be checked. Carefully test the operation of the brakes before placing the vehicle in normal operation.

Genuine Toyota Tundra Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Brake Boosters found

View related parts
Toyota Tundra Brake Booster Assy, W/Master Cylinder
Part Number: 47200-0C073
$890.20 MSRP: $1310.38
You Save: $420.18 (33%)
ADD TO CART
Product Specifications
- Replaces: 47200-0C072
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2006 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK31L-PRBLKA, UCK31L-PRBSKA, UCK31L-PRBSKK, UCK31L-PRSLKA, UCK31L-PRSSKA, UCK31L-PRSSKK, UCK41L-PRBLKA, UCK41L-PRBLKK, UCK41L-PRBSKA, UCK41L-PRBSKK, UCK41L-PRSLKA, UCK41L-PRSLKK, UCK41L-PRSSKA, UCK41L-PRSSKK
View related parts
Toyota Tundra Brake Booster Assy, W/Master Cylinder
Part Number: 47200-0C072
$890.20 MSRP: $1310.38
You Save: $420.18 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 47200-0C073
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2006 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK31L-PRBLKA, UCK31L-PRBSKA, UCK31L-PRBSKK, UCK31L-PRSLKA, UCK31L-PRSSKA, UCK31L-PRSSKK, UCK41L-PRBLKA, UCK41L-PRBLKK, UCK41L-PRBSKA, UCK41L-PRBSKK, UCK41L-PRSLKA, UCK41L-PRSLKK, UCK41L-PRSSKA, UCK41L-PRSSKK
View related parts
Toyota Tundra Booster Assembly, Brake
Part Number: 44610-0C010
$667.83 MSRP: $983.05
You Save: $315.22 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assy, Brake
- Replaced by: 44610-0C012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Tundra | DLX, Limited, SR5 | 6 Cyl 3.4L, 8 Cyl 4.7L | 2UZFE, 5VZFE; 2UZFE, 5VZFE; UCK30L-ARSLKA, UCK30L-ARSLKK, UCK30L-ARSSKA, UCK30L-ARSSKK, UCK30L-ASSLKA, UCK30L-ASSSKA, UCK40L-ARSLKA, UCK40L-ARSLKK, UCK40L-ARSSKA, UCK40L-ARSSKK, UCK40L-ASSLKA, UCK40L-ASSSKA, UCK40L-TRSDKK, UCK40L-TRSSKA, VCK30L-ARMSKA, VCK30L-ARSLKA, VCK30L-ARSSKA, VCK30L-ARSSKK, VCK30L-TRMDKA, VCK30L-TRMDKK, VCK30L-TRSDKA, VCK30L-TRSDKK, VCK40L-ARMSKA, VCK40L-ARMSKK, VCK40L-ARSLKA, VCK40L-ARSSKA, VCK40L-ARSSKK, VCK40L-TRMDKK, VCK40L-TRMSKA, VCK40L-TRSDKK, VCK40L-TRSSKA
View related parts
Toyota Tundra Booster Assembly, Brake
Part Number: 44610-0C070
$996.31 MSRP: $1466.57
You Save: $470.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assy, Brake
- Replaced by: 44610-0C072
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2009 Toyota Tundra | Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1GRFE, 2UZFE, 3URFBE, 3URFE; 1GRFE, 2UZFE, 3URFBE, 3URFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA, UCK50L-TRADKA, UCK51L-CRALKA, UCK51L-CRASKA, UCK51L-THADKA, UCK55L-TRADKA, USK50L-TRTDKA, USK51L-THTDKA, USK55L-TRTDGA, USK55L-TRTDKA
View related parts
Toyota Tundra Booster Assy, Brake
Part Number: 44610-0C111
$781.84 MSRP: $1150.86
You Save: $369.02 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assembly, Brake Booster
- Replaces: 44610-0C110
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2021 Toyota Tundra | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK51L-CRTSKA, UPK51L-PSTSKA, UPK56L-CRTSKA, UPK56L-PSTSKA, USK51L-CRTLGA, USK51L-CRTLKA, USK51L-CRTSGA, USK51L-CRTSKA, USK51L-PSTLGA, USK51L-PSTLKA, USK51L-PSTSGA, USK51L-PSTSKA, USK51L-PSTZGA, USK51L-PSTZKA, USK51L-THTSGA, USK51L-THTSKA, USK52L-CHTSGA, USK52L-CHTSKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-PSTZGA, USK56L-PSTZKA, USK56L-THTSGA, USK56L-THTSKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
Toyota Tundra BOOSTER ASSY, BRAKE
Part Number: 44610-0C120
$605.82 MSRP: $891.76
You Save: $285.94 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2022 Toyota Tundra
View related parts
Toyota Tundra Booster Assembly, Brake
Part Number: 44610-0C110
$781.84 MSRP: $1150.86
You Save: $369.02 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assy, Brake
- Replaced by: 44610-0C111
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2017-2019 Toyota Tundra | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK51L-CRTSKA, UPK51L-PSTSKA, UPK56L-CRTSKA, UPK56L-PSTSKA, USK51L-CRTLGA, USK51L-CRTLKA, USK51L-CRTSGA, USK51L-CRTSKA, USK51L-PSTLGA, USK51L-PSTLKA, USK51L-PSTSGA, USK51L-PSTSKA, USK51L-PSTZGA, USK51L-PSTZKA, USK51L-THTSGA, USK51L-THTSKA, USK52L-CHTSGA, USK52L-CHTSKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-PSTZGA, USK56L-PSTZKA, USK56L-THTSGA, USK56L-THTSKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
Toyota Tundra Booster Assembly, Brake
Part Number: 44610-0C071
$996.31 MSRP: $1466.57
You Save: $470.26 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster Assy, Brake; Booster Assembly, Brake Booster
- Replaced by: 44610-0C072
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2018 Toyota Tundra | Limited, SR5 | 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1GRFE, 1URFE, 2UZFE, 3URFBE, 3URFE; 1GRFE, 1URFE, 2UZFE, 3URFBE, 3URFE; GSK50L-TRADKA, GSK51L-CRASKA, GSK51L-THADKA, GSK51L-THASKA, UCK50L-TRADKA, UCK51L-CRALKA, UCK51L-CRASKA, UCK51L-THADKA, UCK55L-TRADKA, UPK50L-TRTDKA, UPK51L-CRTLKA, UPK51L-CRTSKA, UPK51L-THTDKA, UPK55L-TRTDKA, USK50L-TRTDKA, USK51L-THTDKA, USK51L-THTSGA, USK51L-THTSKA, USK55L-TRTDGA, USK55L-TRTDKA
View related parts
Toyota Tundra Booster Assembly, Brake
Part Number: 44610-0C012
Product Specifications
- Other Name: Booster Assy, Brake; Booster Assembly, Brake Booster
- Replaces: 44610-0C010, 44610-0C011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2006 Toyota Tundra | DLX, Limited, SR5 | 6 Cyl 3.4L, 6 Cyl 4.0L, 8 Cyl 4.7L | 1GRFE, 2UZFE, 5VZFE; 1GRFE, 2UZFE, 2UZFE; GSK30L-ARBSKA, 5VZFE; GSK30L-ARBSKA, 5VZFE; UCK30L-ARSLKA, GSK30L-ARFSKA, GSK30L-TRBDKA, GSK30L-TRBDKK, GSK30L-TRFDKA, UCK30L-ARBLKA, UCK30L-ARBSKA, UCK30L-ARBSKK, UCK30L-ARSLKA, UCK30L-ARSLKK, UCK30L-ARSSKA, UCK30L-ARSSKK, UCK30L-ASBLKA, UCK30L-ASBSKA, UCK30L-ASSLKA, UCK30L-ASSSKA, UCK30L-TRBDKA, UCK40L-ARBLKA, UCK40L-ARBLKK, UCK40L-ARBSKA, UCK40L-ARBSKK, UCK40L-ARSLKA, UCK40L-ARSLKK, UCK40L-ARSSKA, UCK40L-ARSSKK, UCK40L-ASBLKA, UCK40L-ASBSKA, UCK40L-ASSLKA, UCK40L-ASSSKA, UCK40L-TRBDKA, UCK40L-TRBDKK, UCK40L-TRSDKK, UCK40L-TRSSKA, VCK30L-ARMSKA, VCK30L-ARSLKA, VCK30L-ARSSKA, VCK30L-ARSSKK, VCK30L-TRMDKA, VCK30L-TRMDKK, VCK30L-TRSDKA, VCK30L-TRSDKK, VCK40L-ARMSKA, VCK40L-ARMSKK, VCK40L-ARSLKA, VCK40L-ARSSKA, VCK40L-ARSSKK, VCK40L-TRMDKK, VCK40L-TRMSKA, VCK40L-TRSDKK, VCK40L-TRSSKA
View related parts
Toyota Tundra Booster Assembly, Brake
Part Number: 44610-0C091
$976.76 MSRP: $1437.79
You Save: $461.03 (33%)
Product Specifications
- Other Name: Booster Assy, Brake
- Replaced by: 44610-0C092
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2018 Toyota Tundra | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 4.7L, 8 Cyl 5.7L | 1URFE, 2UZFE, 3URFBE, 3URFE; 1URFE, 2UZFE, 3URFBE, 3URFE; UCK51L-PSALKA, UCK51L-PSASKA, UCK52L-CHASKA, UCK56L-CRALKA, UCK56L-CRASKA, UCK56L-PSALKA, UCK56L-PSASKA, UCK56L-THADKA, UCK57L-CHASKA, UPK51L-PSTLKA, UPK51L-PSTSKA, UPK52L-CHTSKA, UPK56L-CRTLKA, UPK56L-CRTSKA, UPK56L-PSTLKA, UPK56L-PSTSKA, UPK56L-THTDKA, UPK57L-CHTSKA, USK51L-CRTLGA, USK51L-CRTLKA, USK51L-CRTSGA, USK51L-CRTSKA, USK51L-PSTLGA, USK51L-PSTLKA, USK51L-PSTSGA, USK51L-PSTSKA, USK51L-PSTZGA, USK51L-PSTZKA, USK51L-THTSKA, USK52L-CHTSGA, USK52L-CHTSKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-PSTZGA, USK56L-PSTZKA, USK56L-THTDGA, USK56L-THTDKA, USK56L-THTSGA, USK56L-THTSKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
Toyota Tundra Booster Assembly, Brake
Part Number: 44610-0C090
$976.76 MSRP: $1437.79
You Save: $461.03 (33%)
Product Specifications
- Other Name: Booster Assy, Brake
- Replaced by: 44610-0C092
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2007-2009 Toyota Tundra | Limited, SR5 | 8 Cyl 4.7L, 8 Cyl 5.7L | 2UZFE, 3URFBE, 3URFE; 2UZFE, 3URFBE, 3URFE; UCK51L-PSALKA, UCK51L-PSASKA, UCK52L-CHASKA, UCK56L-CRALKA, UCK56L-CRASKA, UCK56L-PSALKA, UCK56L-PSASKA, UCK56L-THADKA, UCK57L-CHASKA, USK51L-CRTLKA, USK51L-CRTSKA, USK51L-PSTLKA, USK51L-PSTSKA, USK52L-CHTSKA, USK56L-CRTLGA, USK56L-CRTLKA, USK56L-CRTSGA, USK56L-CRTSKA, USK56L-PSTLGA, USK56L-PSTLKA, USK56L-PSTSGA, USK56L-PSTSKA, USK56L-THTDGA, USK56L-THTDKA, USK57L-CHTSGA, USK57L-CHTSKA
View related parts
Toyota Tundra Booster Assembly, Brake
Part Number: 44610-0C011
Product Specifications
- Other Name: Booster Assy, Brake
- Replaced by: 44610-0C012
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2002-2006 Toyota Tundra | DLX, Limited, SR5 | 6 Cyl 3.4L, 6 Cyl 4.0L, 8 Cyl 4.7L | 1GRFE, 2UZFE, 5VZFE; 1GRFE, 2UZFE, 5VZFE; GSK30L-ARBSKA, GSK30L-ARFSKA, GSK30L-TRBDKA, GSK30L-TRBDKK, GSK30L-TRFDKA, UCK30L-ARBLKA, UCK30L-ARBSKA, UCK30L-ARBSKK, UCK30L-ARSLKA, UCK30L-ARSLKK, UCK30L-ARSSKA, UCK30L-ARSSKK, UCK30L-ASBLKA, UCK30L-ASBSKA, UCK30L-ASSLKA, UCK30L-ASSSKA, UCK30L-TRBDKA, UCK40L-ARBLKA, UCK40L-ARBLKK, UCK40L-ARBSKA, UCK40L-ARBSKK, UCK40L-ARSLKA, UCK40L-ARSLKK, UCK40L-ARSSKA, UCK40L-ARSSKK, UCK40L-ASBLKA, UCK40L-ASBSKA, UCK40L-ASSLKA, UCK40L-ASSSKA, UCK40L-TRBDKA, UCK40L-TRBDKK, UCK40L-TRSDKK, UCK40L-TRSSKA, VCK30L-ARMSKA, VCK30L-ARSLKA, VCK30L-ARSSKA, VCK30L-TRMDKA, VCK30L-TRMDKK, VCK30L-TRSDKA, VCK30L-TRSDKK, VCK40L-ARMSKA, VCK40L-ARSLKA, VCK40L-ARSSKA, VCK40L-ARSSKK, VCK40L-TRMSKA, VCK40L-TRSDKK, VCK40L-TRSSKA

Toyota Tundra Brake Booster

The Toyota Tundra Brake Booster is a vital part in the car's braking system that is meant to lessen the force exerted by the brakes. The Vacuum Booster is designed in a manner that an increase in force exerted on the brake pedal is facilitated by the use of a vacuum chamber hence improving braking's efficiency. This device plays a significant role in the achievement of better braking capacity of this automobile especially the Toyota Tundra. The Toyota Tundra has incorporated various sort of Brake Boosters up to date which in one way or the other is intended to provide better build-up brake and overall safety of the car.

If you are in demand for superior quality and affordable OEM Toyota Tundra Brake Booster, then shop with us! We own a wide range of the reduced-priced genuine Toyota Tundra Brake Booster. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Tundra Brake Booster Parts Questions & Experts Answers

Booster Assembly, Brake
44610-0C091
Q: How to operate and remove/install a power brake booster on Toyota Tundra?
A: Depress the brake pedal several times with the engine off and make sure there's no change in the pedal reserve distance. Depress the pedal and start the engine. If the pedal goes down slightly, operation is normal. Airtightness check: Start the engine and turn it off after one or two minutes. Depress the brake pedal slowly several times. If the pedal depresses less each time, the booster is airtight. Depress the brake pedal while the engine is running, then stop the engine with the pedal depressed. If there's no change in the pedal reserve travel after holding the pedal for 30 seconds, the booster is airtight. Removal: Power brake booster units shouldn't be disassembled. They require special tools not normally found in most automotive repair stations or shops. Because of its critical relationship to brake performance, the booster should be replaced with a new or rebuilt one. Disconnect the electrical connectors from the booster. Disconnect the vacuum hose leading from the engine to the booster. Be careful not to damage the hose when removing it from the booster fitting. Remove the Brake Master Cylinder. Remove the left side lower finish panel from the instrument panel. Locate the pushrod clevis connecting the booster to the brake pedal. Remove the clevis pin retaining clip with pliers and pull out the pin. Remove the four nuts holding the brake booster to the firewall; you may need a light to see them. Slide the booster straight out from the firewall until the studs clear the holes. Installation: Installation procedures are basically the reverse of removal. Make sure the clevis pin retaining clip is fully seated. After the final installation of the master cylinder and Brake Lines, the system must be bled and the brake pedal height and freeplay must be checked. Carefully test the operation of the brakes before placing the vehicle in normal operation.