Toyota 48780-0E061 Arm Assembly, Trailing

You can Select Your Vehicle to check if 48780-0E061 fits your vehicle.

1. Remove the rear stabilizer bar. 2. Mark the cam bolt on both sides to preserve the toe-in alignment angle. 3. For 2013 and earlier Highlander and 2009 and earlier Lexus models, remove the arm fasteners from the axle carrier and suspension cross member, then remove the arm. For 2014 and later Highlander and 2010 and later RX350 models, remove the coil spring, then remove the fasteners from the suspension cross member and remove the arm. 4. On Lexus vehicles with electronically modulated air suspension, detach the height sensor linkage from the arm before removing the mounting fasteners.