Toyota 81150-04160 Driver Side Headlight Assembly

You can Select Your Vehicle to check if 81150-04160 fits your vehicle.

Remove the radiator grille and the front bumper cover. To detach the small trim panel below the headlight housing, remove the Phillips head cap screw and washer at the inner end of the trim piece, then pull off the trim panel. To remove the headlight housing, take out the mounting bolts. Note how the tab in the center of the trim piece fits into a slot on the underside of the headlight housing, and how a slot on the outer end of the trim engages a tab on the front fender. Inspect the condition of the screw and clip; if they are damaged, replace them. Remove the headlight housing mounting bolts, pull out the headlight housing, and disconnect the electrical connectors from the bulbs. Installation is the reverse of removal, and when finished, check the headlight adjustment.

The vertical adjuster controls the up-and-down movement of the headlight housing.

FIRST 2# WITH BULBS AND SOCKETS LAST 2# W/O