Toyota 12327-20020 Stay, Engine Mounting RH

You can Select Your Vehicle to check if 12327-20020 fits your vehicle.

The location of the rear engine/driveaxle mount through-bolt can be found in the vehicle's service manual or repair guide.

Disconnect the cable from the negative battery terminal, then raise the vehicle and support it securely on jackstands, if not already done. Support the engine.

Check the mounts for any cracks, hardened rubber, or separation from the metal plates. Additionally, look for separation of the rubber from the bushing in the center of the mount.

To check the engine mounts, you should raise the vehicle and securely support it on jackstands. Position a jack under the engine oil pan and place a large block of wood between the jack head and the oil pan. Raise the engine slightly to remove the weight from the mounts. Do not position the wood block under the drain plug. Then, visually inspect the mounts for signs of damage and use a large screwdriver or pry bar to check for any movement. If movement is observed, lower the engine and tighten the mount fasteners. Applying rubber preservative to the mounts can help slow down deterioration.

The rear mount on V6 models has a different engine mounting bracket that cradles the insulator. It is retained by a through-bolt to the chassis bracket.