How to remove and install the steering knuckle on Toyota Matrix?

To remove the wheel, first loosen the lug nuts, raise the vehicle, and support it securely on jackstands before taking off the wheel. Next, remove the brake caliper without disconnecting the hose and take off the brake disc, then disconnect the brake hose from the strut and hang the caliper from the coil spring using a piece of wire, ensuring it does not hang by the brake hose. If the vehicle has ABS, disconnect and remove the wheel speed sensor. Mark the relationship of the strut to the steering knuckle, then loosen the strut-to-steering knuckle nuts and bolts without removing them. Separate the tie-rod end from the steering knuckle arm, then remove the balljoint-to-lower arm bolt and nuts, prying the control arm and balljoint apart with a large prybar or screwdriver. Remove the driveaxle/hub nut and push the driveaxle from the hub, supporting the end with a piece of wire. If the axle is out, use a balljoint removal tool or small puller to detach the balljoint from the steering knuckle, noting that if the balljoint is in good condition, it can remain attached when replacing the hub bearings. Remove the strut-to-knuckle bolts and carefully separate the steering knuckle from the strut. For installation, guide the knuckle and hub assembly into position, inserting the driveaxle into the hub, then push the knuckle into the strut flange and install the bolts and nuts without tightening them yet. If reusing the balljoint from the old knuckle, connect it to the new knuckle and tighten the balljoint stud nut. Attach the balljoint to the control arm without tightening the bolt and nuts yet, then attach the tie-rod to the steering knuckle arm and tighten the strut bolt nuts, the balljoint-to-control arm bolt and nuts, and the tie-rod nut. Place the brake disc on the hub and install the caliper, followed by the driveaxle/hub nut, which should be tightened. Finally, install the wheel and lug nuts, lower the vehicle, tighten the lug nuts, and have the front-end alignment checked and adjusted if necessary.

Genuine Toyota Matrix Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Steering Knuckles found

View related parts
Toyota Matrix Knuckle, Steering, LH
Part Number: 43212-02220
$207.16 MSRP: $297.06
You Save: $89.90 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering Knuckle
- Position: Driver Side
- Replaces: 43212-12440
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 1.8L | 2ZRFE; 2ZRFE; ZRE142L-DHMDKA, ZRE142L-DHMDKK, ZRE142L-DHPDKA, ZRE142L-DHPDKK
View related parts
Toyota Matrix Knuckle, Steering, RH
Part Number: 43211-02220
$219.34 MSRP: $314.53
You Save: $95.19 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering Knuckle
- Position: Passenger Side
- Replaces: 43211-12490
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 1.8L | 2ZRFE; 2ZRFE; ZRE142L-DHMDKA, ZRE142L-DHMDKK, ZRE142L-DHPDKA, ZRE142L-DHPDKK
View related parts
Toyota Matrix Knuckle, Steering, RH
Part Number: 43211-12420
$259.83 MSRP: $372.58
You Save: $112.75 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Manufacturer Note: W(ABS)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | STD, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; 1ZZFE, 2ZZGE; ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK
View related parts
Toyota Matrix Knuckle, Steering, LH
Part Number: 43212-19015
$266.90 MSRP: $382.73
You Save: $115.83 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; 1ZZFE, 2ZZGE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK
View related parts
Toyota Matrix Knuckle, Steering, LH
Part Number: 43212-12370
$259.83 MSRP: $372.58
You Save: $112.75 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Manufacturer Note: W(ABS)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | STD, XR, XRS | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; 1ZZFE, 2ZZGE; ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK, ZZE133L-DHFSFA, ZZE133L-DHFSFK, ZZE133L-DHPSFA, ZZE133L-DHPSFK
View related parts
Toyota Matrix Knuckle, Steering, LH
Part Number: 43212-02230
$240.57 MSRP: $344.96
You Save: $104.39 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK
View related parts
Toyota Matrix Knuckle, Steering, RH
Part Number: 43211-19015
$266.90 MSRP: $382.73
You Save: $115.83 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | CE, LE, S | 4 Cyl 1.8L | 1ZZFE, 2ZZGE; 1ZZFE, 2ZZGE; ZZE130L-DEMDKA, ZZE130L-DEMDKK, ZZE130L-DEMNKA, ZZE130L-DEMNKK, ZZE130L-DEMSKA, ZZE130L-DEMSKK, ZZE130L-DEPDKA, ZZE130L-DEPDKK, ZZE130L-DEPNKA, ZZE130L-DEPNKK, ZZE130L-DEPSKA, ZZE130L-DEPSKK, ZZE131L-DEFSFA, ZZE131L-DEFSFK
View related parts
Toyota Matrix Knuckle, Steering, LH
Part Number: 43212-12390
$259.83 MSRP: $372.58
You Save: $112.75 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2007 Toyota Matrix | STD, XR | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK
View related parts
Toyota Matrix Knuckle, Steering, RH
Part Number: 43211-12430
$259.83 MSRP: $372.58
You Save: $112.75 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | STD, XR | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK
View related parts
Toyota Matrix Knuckle, Steering, RH
Part Number: 43211-02210
$227.58 MSRP: $326.33
You Save: $98.75 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE144L-DHPNKA, AZE144L-DHPNKK
View related parts
Toyota Matrix Knuckle, Steering, RH
Part Number: 43211-02230
$240.57 MSRP: $344.96
You Save: $104.39 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE141L-DHANKA, AZE141L-DHANKK, AZE141L-DHMNKA, AZE141L-DHMNKK, AZE146L-DHASKA, AZE146L-DHASKK, AZE146L-DHMSKA, AZE146L-DHMSKK
View related parts
Toyota Matrix Knuckle, Steering, LH
Part Number: 43212-02210
$240.57 MSRP: $344.96
You Save: $104.39 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2009-2014 Toyota Matrix | 4 Cyl 2.4L | 2AZFE; 2AZFE; AZE144L-DHPNKA, AZE144L-DHPNKK
View related parts
Toyota Matrix Knuckle, Steering, RH
Part Number: 43211-12440
$247.30 MSRP: $354.62
You Save: $107.32 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2007 Toyota Matrix | STD, XR | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE134L-DHPDKA, ZZE134L-DHPDKK, ZZE134L-DHPNKA, ZZE134L-DHPNKK
View related parts
Toyota Matrix Knuckle, Steering, LH
Part Number: 43212-12380
$247.30 MSRP: $354.62
You Save: $107.32 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2003-2008 Toyota Matrix | STD, XR | 4 Cyl 1.8L | 1ZZFE; 1ZZFE; ZZE132L-DHMDKA, ZZE132L-DHMDKK, ZZE132L-DHMNKA, ZZE132L-DHMNKK, ZZE132L-DHPDKA, ZZE132L-DHPDKK, ZZE132L-DHPNKA, ZZE132L-DHPNKK

Toyota Matrix Steering Knuckle

If you are in demand for superior quality and affordable OEM Toyota Matrix Steering Knuckle, then shop with us! We own a wide range of the reduced-priced genuine Toyota Matrix Steering Knuckle. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Matrix Steering Knuckle Parts Questions & Experts Answers

Knuckle, Steering, LH
43212-12370
Q: How to remove and install the steering knuckle on Toyota Matrix?
A: To remove the wheel, first loosen the lug nuts, raise the vehicle, and support it securely on jackstands before taking off the wheel. Next, remove the brake caliper without disconnecting the hose and take off the brake disc, then disconnect the brake hose from the strut and hang the caliper from the coil spring using a piece of wire, ensuring it does not hang by the brake hose. If the vehicle has ABS, disconnect and remove the wheel speed sensor. Mark the relationship of the strut to the steering knuckle, then loosen the strut-to-steering knuckle nuts and bolts without removing them. Separate the tie-rod end from the steering knuckle arm, then remove the balljoint-to-lower arm bolt and nuts, prying the Control Arm and balljoint apart with a large prybar or screwdriver. Remove the driveaxle/hub nut and push the driveaxle from the hub, supporting the end with a piece of wire. If the axle is out, use a balljoint removal tool or small puller to detach the balljoint from the steering knuckle, noting that if the balljoint is in good condition, it can remain attached when replacing the hub bearings. Remove the strut-to-knuckle bolts and carefully separate the steering knuckle from the strut. For installation, guide the knuckle and hub assembly into position, inserting the driveaxle into the hub, then push the knuckle into the strut flange and install the bolts and nuts without tightening them yet. If reusing the balljoint from the old knuckle, connect it to the new knuckle and tighten the balljoint stud nut. Attach the balljoint to the control arm without tightening the bolt and nuts yet, then attach the tie-rod to the steering knuckle arm and tighten the strut bolt nuts, the balljoint-to-control arm bolt and nuts, and the tie-rod nut. Place the brake disc on the hub and install the caliper, followed by the driveaxle/hub nut, which should be tightened. Finally, install the wheel and lug nuts, lower the vehicle, tighten the lug nuts, and have the front-end alignment checked and adjusted if necessary.

Related Toyota Matrix Parts

Browse by Year

2014 Steering Knuckle 2013 Steering Knuckle 2012 Steering Knuckle 2011 Steering Knuckle 2010 Steering Knuckle 2009 Steering Knuckle 2008 Steering Knuckle 2007 Steering Knuckle 2006 Steering Knuckle 2005 Steering Knuckle 2004 Steering Knuckle 2003 Steering Knuckle