How to replace the CKP sensor on Toyota Sequoia?

The Crankshaft Position Sensor is located at the front lower left corner of the engine. To replace it, first disconnect the cable from the negative battery terminal. Then, raise the vehicle and secure it on jackstands. Remove the engine under-cover. On V6 models, remove the alternator and the bolt that secures the air conditioning suction line, disconnect the electrical connector from the air conditioning compressor, and unbolt the compressor. On V6 and 2UZ-FE V8 engines, disconnect the CKP sensor electrical connector. On 1UR-FE, 3UR-FE, and 3UR-FBE V8 engines, remove the sensor protector mounting bolts and protector from the driver's side lower rear corner of the engine, then disconnect the sensor electrical connector. Remove the CKP sensor retaining bolt. Finally, installation is the reverse of removal, making sure to tighten the CKP sensor retaining bolt securely.

Genuine Toyota Sequoia Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Crankshaft Position Sensors found

View related parts
Toyota Sequoia Sensor, Crank Position
Part Number: 90919-05060
$96.28 MSRP: $135.72
You Save: $39.44 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position, NO.2
- Replaced by: 90919-T5005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Sensor, Crank Position
Part Number: 90919-05071
$93.21 MSRP: $131.40
You Save: $38.19 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Position Sensor, Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Sensor, Crank Position
Part Number: 90919-05035
$117.69 MSRP: $167.33
You Save: $49.64 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (J)
- Replaced by: 90919-A5001
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Sensor, Crank Position
Part Number: 90919-05036
$117.57 MSRP: $167.16
You Save: $49.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Cam Position
- Manufacturer Note: (J)
- Replaced by: 90919-A5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Sensor, Crank Position
Part Number: 90919-A5001
$117.69 MSRP: $167.33
You Save: $49.64 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Position Sensor, Crankshaft Sensor
- Manufacturer Note: (L)
- Replaces: 90919-05035
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2010 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA, UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA

Toyota Sequoia Crankshaft Position Sensor

Toyota Sequoia is among the vehicles that use Crankshaft Position Sensor which is an electronic device that helps to ascertain the crankshaft's position and its rate of rotation. It relays this information to the power train control module that with the information helps in the regulating of the fuel injection as well as the ignition timing to ensure efficiency of the motors. Crankshaft position sensors have included inductive, Hall Effect, magnetoresistive, and optical sensors have been used. Inductive sensors are not self-generating and hence is a passive type of sensor; Hall and magnetoresistive sensors can only sense DC magnetic fields. Optical sensors give good edge detection, but the risk of fouling is possible. More specifically, the sensor is generally installed near the crank pulley, the flywheel or on the crankshaft, and a failure of the device can result in the incorrect start of the device or a stall. In conclusion, the CPS is an important component for the monitoring and controlling of some important parameters of the Toyota Sequoia automobile mode.

If you are in demand for superior quality and affordable OEM Toyota Sequoia Crankshaft Position Sensor, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sequoia Crankshaft Position Sensor. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sequoia Crankshaft Position Sensor Parts Questions & Experts Answers

Sensor, Crank Position
90919-05071
Q: How to replace the CKP sensor on Toyota Sequoia?
A: The Crankshaft Position Sensor is located at the front lower left corner of the engine. To replace it, first disconnect the cable from the negative battery terminal. Then, raise the vehicle and secure it on jackstands. Remove the engine under-cover. On V6 models, remove the alternator and the bolt that secures the air conditioning suction line, disconnect the electrical connector from the air conditioning compressor, and unbolt the compressor. On V6 and 2UZ-FE V8 engines, disconnect the CKP sensor electrical connector. On 1UR-FE, 3UR-FE, and 3UR-FBE V8 engines, remove the sensor protector mounting bolts and protector from the driver's side lower rear corner of the engine, then disconnect the sensor electrical connector. Remove the CKP sensor retaining bolt. Finally, installation is the reverse of removal, making sure to tighten the CKP sensor retaining bolt securely.