How to remove the CMP sensor on Toyota Sequoia?

On V6 models, the two Camshaft Position Sensor are located on the inside walls of the cylinder heads. To remove it, take off the drivebelt and left timing belt cover, disconnect the CMP sensor electrical connector and remove the bolt and stud. The CMP sensor is also located on the front of the left cylinder head. To remove it, remove the engine cover, followed by disconnecting the CMP sensor electrical connector and removing the retaining bolt and sensor from the driver's side valve cover. Installation is the reverse of removal.

Genuine Toyota Sequoia Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Camshaft Position Sensors found

View related parts
Toyota Sequoia Sensor, Crank Position
Part Number: 90919-05060
$96.28 MSRP: $135.72
You Save: $39.44 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Crank Position, NO.2
- Replaced by: 90919-T5005
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2008-2022 Toyota Sequoia | Limited, Platinum, SR5 | 8 Cyl 4.6L, 8 Cyl 5.7L | 1URFE, 3URFBE, 3URFE; 1URFE, 3URFBE, 3URFE; UPK60L-GKTLKA, UPK60L-GKTSKA, UPK65L-GKTLKA, UPK65L-GKTSKA, USK60L-GKTLKA, USK60L-GKTSKA, USK60L-GKTZKA, USK65L-GKTLGA, USK65L-GKTLKA, USK65L-GKTSGA, USK65L-GKTSKA, USK65L-GKTZGA, USK65L-GKTZKA
View related parts
Toyota Sequoia Sensor Assy, Cam Position
Part Number: 19300-50020
$143.55 MSRP: $204.09
You Save: $60.54 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Position Sensor, Camshaft Sensor
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2005 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Sensor, Cam Position
Part Number: 90919-A5002
$117.57 MSRP: $167.16
You Save: $49.59 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (L)
- Replaces: 90919-05036
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2010 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA, UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA
View related parts
Toyota Sequoia Sensor, Crank Position
Part Number: 90919-05036
$117.57 MSRP: $167.16
You Save: $49.59 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Cam Position
- Manufacturer Note: (J)
- Replaced by: 90919-A5002
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA
View related parts
Toyota Sequoia Sensor Assy, Cam Position
Part Number: 19300-50011
$138.75 MSRP: $197.26
You Save: $58.51 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Camshaft Position Sensor, Camshaft Sensor
- Replaces: 19300-50030, 19300-50010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2010 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA, UCK60L-GKALKA, UCK60L-GKASKA, UCK65L-GKALKA, UCK65L-GKASKA
View related parts
Toyota Sequoia Sensor Assy, Cam Position
Part Number: 19300-50010
$138.75 MSRP: $197.26
You Save: $58.51 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 19300-50011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2007 Toyota Sequoia | Limited, SR5 | 8 Cyl 4.7L | 2UZFE; 2UZFE; UCK35L-GKBLKA, UCK35L-GKBSKA, UCK35L-GKSLKA, UCK35L-GKSSKA, UCK45L-GKBLKA, UCK45L-GKBSKA, UCK45L-GKSLKA, UCK45L-GKSSKA

Toyota Sequoia Camshaft Position Sensor

Camshaft Position Sensor in Toyota Sequoia automobiles is an important sensor that signals the position and speed of the camshaft to the engine control module in managing fuel injector and the spark timing. Usually, it is installed in the engine area, more precisely, above the camshaft, but the location can differ depending on the vehicle. Together with the crank sensor, the Camshaft Position Sensor is used to regulate engine components' operations needed for accurate fuel injection timing and accurate measurement of the engine speed. A bad Camshaft Position Sensor can result in slow performance of an automobile's engine; therefore, periodic check-up is crucial.

If you are in demand for superior quality and affordable OEM Toyota Sequoia Camshaft Position Sensor, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sequoia Camshaft Position Sensor. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sequoia Camshaft Position Sensor Parts Questions & Experts Answers

Sensor Assy, Cam Position
19300-50011
Q: How to remove the CMP sensor on Toyota Sequoia?
A: On V6 models, the two Camshaft Position Sensor are located on the inside walls of the cylinder heads. To remove it, take off the drivebelt and left timing belt cover, disconnect the CMP sensor electrical connector and remove the bolt and stud. The CMP sensor is also located on the front of the left cylinder head. To remove it, remove the engine cover, followed by disconnecting the CMP sensor electrical connector and removing the retaining bolt and sensor from the driver's side valve cover. Installation is the reverse of removal.