How to check and replace the hazard warning switch and Mirror Switch on Toyota Sienna?

To check the hazard warning switch, it must first be removed from the center dashboard trim bezel, followed by testing for continuity between the terminals; if it fails, replacement is necessary. For replacement, carefully pry the upper cluster finish panel from the dashboard, then pull the panel out to disconnect the electrical connector at the rear of the switch, ensuring to squeeze the clips retaining the hazard switch. The power mirror control switch, located at the left end of the instrument panel, should be removed for testing continuity between its terminals; if continuity is not as specified, it should be replaced. To replace it, carefully pry the switch from the panel using tape on the screwdriver tip to avoid scratches, disconnect the electrical connector, and reinstall by reversing the removal procedure. The traction control switch, which works with the ABS braking system, should be removed for testing; continuity should be present when pressed and absent when released, with replacement required if it does not meet these conditions. For replacement, pry the switch from the panel, disconnect the electrical connector, and reinstall by reversing the removal procedure. The instrument panel light control switch, a rheostat controlling voltage to the lights, requires removal for testing; apply battery voltage to terminal 1 and a ground jumper to terminal 3, checking for varying voltage as the knob is turned. For replacement, on models with the rheostat below the left vent, pry the switch panel out of the dashboard with a screwdriver, ensuring to tape the tip to prevent scratches, while models with a thumb-wheel require the instrument cluster to be removed for access.

Genuine Toyota Sienna Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Mirror Switches found

View related parts
Toyota Sienna Switch Assy, Outer Mirror
Part Number: 84870-08010
$146.40 MSRP: $208.14
You Save: $61.74 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mirror Switch
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
View related parts
Toyota Sienna Switch, Outer Mirror
Part Number: 84872-08020
$146.71 MSRP: $208.57
You Save: $61.86 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Outer Mirror; Mirror Switch
- Manufacturer Note: TRD PACKAGE
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2020 Toyota Sienna | LE, SE, STD, XLE | 6 Cyl 3.5L | 2GRFE, 2GRFKS; 2GRFE, 2GRFKS; GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PFZDHA, GSL30L-PFZEHA, GSL30L-PFZQHA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL30L-PRZEHA, GSL30L-PRZQHA, GSL30L-PRZSHA, GSL33L-SBTDKA, GSL33L-SBZDHA, GSL33L-SEZDHA, GSL35L-PFTEKA, GSL35L-PFTQKA, GSL35L-PFZEHA, GSL35L-PFZQHA, GSL35L-PFZSHA
View related parts
Toyota Sienna Switch Assy, Outer Mirror
Part Number: 84872-02060
$113.58 MSRP: $160.10
You Save: $46.52 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mirror Switch
- Manufacturer Note: TYPE A:REFER ILLUST.
- Position: Outer
- Replaces: 84872-06040, 84872-02050, 84872-52030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2004-2015 Toyota Sienna | CE, LE, SE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.3L, 6 Cyl 3.5L | 1ARFE, 2GRFE, 3MZFE; 1ARFE, 2GRFE, 3MZFE; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL20L-PFADKK, GSL20L-PFAEKA, GSL20L-PFAEKK, GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRADKK, GSL20L-PRAEKA, GSL20L-PRAEKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL23L-SBADKA, GSL23L-SBADKK, GSL25L-PFADKK, GSL25L-PFAEKA, GSL25L-PFAEKK, GSL25L-PFAQKA, GSL25L-PFAQKK, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL33L-SBTDKA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA, MCL20L-PFADKK, MCL20L-PFAEKA, MCL20L-PFAEKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRADKK, MCL20L-PRAEKA, MCL20L-PRAEKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL23L-SBADKA, MCL23L-SBADKK, MCL25L-PFADKK, MCL25L-PFAEKA, MCL25L-PFAEKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Switch Assembly, Outer M
Part Number: 84870-0T010-B0
$146.40 MSRP: $208.14
You Save: $61.74 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Outer Mirror; Mirror Switch
- Manufacturer Note: LT.GRAY,TRIM1#
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2015 Toyota Sienna | LE, SE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE; 1ARFE, 2GRFE; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL30L-PRTSKA, GSL33L-SBTDKA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA
View related parts
Toyota Sienna Switch Assembly, Outer M
Part Number: 84870-08020-B0
$170.46 MSRP: $242.33
You Save: $71.87 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Outer Mirror; Mirror Switch
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2015 Toyota Sienna | XLE | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSL30L-PFTQKA, GSL35L-PFTQKA
View related parts
Toyota Sienna Switch, Outer Mirror
Part Number: 84872-08010
$170.15 MSRP: $241.90
You Save: $71.75 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Outer Mirror; Mirror Switch
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2014-2020 Toyota Sienna | XLE | 6 Cyl 3.5L | 2GRFE, 2GRFKS; 2GRFE, 2GRFKS; GSL30L-PFTQKA, GSL30L-PFZQHA, GSL35L-PFTQKA, GSL35L-PFZQHA
View related parts
Toyota Sienna Switch, Outer Mirror
Part Number: 84872-08030
$79.51 MSRP: $112.08
You Save: $32.57 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mirror Switch
- Manufacturer Note: AWD PARKS PLUS
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; A25AFXS; AXLH40L-PNXSHA, AXLH45L-PNXSHA, AXLH45L-PNXXHA
View related parts
Toyota Sienna Switch Assembly, Outer M
Part Number: 84870-08020-E0
$186.19 MSRP: $266.98
You Save: $80.79 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Outer Mirror; Mirror Switch
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2015 Toyota Sienna | XLE | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSL30L-PFTQKA, GSL35L-PFTQKA
View related parts
Toyota Sienna Switch, Outer Mirror
Part Number: 84872-0E110
$100.38 MSRP: $141.51
You Save: $41.13 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mirror Switch
- Manufacturer Note: TRD PACKAGE
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; A25AFXS; AXLH40L-PNXXHA, AXLH40L-PPXEHA, AXLH40L-PPXXHA, AXLH45L-PNXXHA, AXLH45L-PPXEHA
View related parts
Toyota Sienna Switch Assembly, Outer M
Part Number: 84870-0T010-E0
$161.02 MSRP: $228.91
You Save: $67.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Outer Mirror; Mirror Switch
- Manufacturer Note: GREGE,TRIM4#
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2011-2015 Toyota Sienna | LE, STD, XLE | 4 Cyl 2.7L, 6 Cyl 3.5L | 1ARFE, 2GRFE; 1ARFE, 2GRFE; ASL30L-PFTEKA, ASL30L-PRTEKA, GSL30L-PFTDKA, GSL30L-PFTEKA, GSL30L-PFTQKA, GSL30L-PRTEKA, GSL30L-PRTQKA, GSL33L-SBTDKA, GSL35L-PFTDKA, GSL35L-PFTEKA, GSL35L-PFTQKA
View related parts
Toyota Sienna Switch, Outer Mirror
Part Number: 84872-0E140
$161.02 MSRP: $228.91
You Save: $67.89 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mirror Switch
- Manufacturer Note: TAIWAN SPEC&BACK MONITOR-WITH(PANORAMIC VIEW MONITOR)
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2021-2022 Toyota Sienna | 4 Cyl 2.5L | A25AFXS; A25AFXS; AXLH40L-PNXLHA, AXLH40L-PNXXHA, AXLH45L-PNXLHA
View related parts
Toyota Sienna Switch Assy, Outer Mirror
Part Number: 84872-0C010
$170.46 MSRP: $242.33
You Save: $71.87 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assy, Outer Mirror, NO.2; Mirror Switch
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2010 Toyota Sienna | XLE | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; 2GRFE, 3MZFE; GSL20L-PFAQKA, GSL20L-PFAQKK, GSL20L-PRAQKA, GSL20L-PRAQKK, GSL25L-PFAQKA, GSL25L-PFAQKK, MCL20L-PFAQKA, MCL20L-PFAQKK, MCL20L-PRAQKA, MCL20L-PRAQKK, MCL25L-PFAQKA, MCL25L-PFAQKK
View related parts
Toyota Sienna Switch Assy, Outer Mirror
Part Number: 84870-06020
$181.96 MSRP: $260.92
You Save: $78.96 (31%)
Product Specifications
- Other Name: Mirror Switch
- Position: Outer
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2001 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK

Toyota Sienna Mirror Switch

If you are in demand for superior quality and affordable OEM Toyota Sienna Mirror Switch, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sienna Mirror Switch. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sienna Mirror Switch Parts Questions & Experts Answers

Switch Assy, Outer Mirror
84870-08010
Q: How to check and replace the hazard warning switch and Mirror Switch on Toyota Sienna?
A: To check the hazard warning switch, it must first be removed from the center dashboard trim bezel, followed by testing for continuity between the terminals; if it fails, replacement is necessary. For replacement, carefully pry the upper cluster finish panel from the dashboard, then pull the panel out to disconnect the electrical connector at the rear of the switch, ensuring to squeeze the clips retaining the hazard switch. The power mirror control switch, located at the left end of the instrument panel, should be removed for testing continuity between its terminals; if continuity is not as specified, it should be replaced. To replace it, carefully pry the switch from the panel using tape on the screwdriver tip to avoid scratches, disconnect the electrical connector, and reinstall by reversing the removal procedure. The traction control switch, which works with the ABS braking system, should be removed for testing; continuity should be present when pressed and absent when released, with replacement required if it does not meet these conditions. For replacement, pry the switch from the panel, disconnect the electrical connector, and reinstall by reversing the removal procedure. The instrument panel light control switch, a rheostat controlling voltage to the lights, requires removal for testing; apply battery voltage to terminal 1 and a ground jumper to terminal 3, checking for varying voltage as the knob is turned. For replacement, on models with the rheostat below the left vent, pry the switch panel out of the dashboard with a screwdriver, ensuring to tape the tip to prevent scratches, while models with a thumb-wheel require the instrument cluster to be removed for access.