How to service valves, valve seats, and valve guides on Toyota Solara?

Due to the intricate nature of the task and the specific tools and equipment required, a professional should handle the servicing of the valves, valve seats, and valve guides, often referred to as a valve job. A home mechanic can undertake the removal and disassembly of the head(s), perform the initial cleaning and inspection, then reassemble and transport them to a dealer service department or an automotive machine shop for the actual service work. This inspection allows the mechanic to understand the condition of the head(s) and valvetrain components and to know what work and new parts are needed when dealing with an automotive machine shop. The dealer service department or automotive machine shop will then remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers and keepers (if necessary), replace the valve seals with new ones, reassemble the valve components and ensure the installed spring height is correct. They will also resurface the cylinder head gasket surface if it's warped. After the valve job has been professionally done, the head(s) will be in a condition similar to new. When the heads are returned, they should be cleaned again before installation on the engine to remove any remaining metal particles and abrasive grit from the valve service or head resurfacing operations. If available, use compressed air to blow out all the oil holes and passages.

Genuine Toyota Solara Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Intake Valves found

View related parts
Toyota Solara Valve, Intake
Part Number: 13711-28010
$15.20 MSRP: $21.24
You Save: $6.04 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 13711-0H010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2008 Toyota Solara | SE, SLE | 4 Cyl 2.4L | 2AZFE; 2AZFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, ACV30L-GCAGKA, ACV30L-GCANKA, ACV30L-GCMNKA, ACV30L-GCPGKA, ACV30L-GCPNKA
View related parts
Toyota Solara Valve, Intake
Part Number: 13711-74080
$13.16 MSRP: $18.39
You Save: $5.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (J)
- Replaced by: 13711-03020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2002 Toyota Solara | 4 Cyl 2.2L | 5SFE; 5SFE; SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
Toyota Solara Valve, Intake
Part Number: 13711-0H010
$15.20 MSRP: $21.24
You Save: $6.04 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Replaces: 13711-28010, 13711-0H030
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2001-2008 Toyota Solara | SE, SLE | 4 Cyl 2.4L | 2AZFE; 2AZFE; ACV20L-GCMNKA, ACV20L-GCPNKA, ACV20L-GCPNKK, ACV20L-GKPNKA, ACV30L-GCAGKA, ACV30L-GCANKA, ACV30L-GCMNKA, ACV30L-GCPGKA, ACV30L-GCPNKA
View related parts
Toyota Solara Valve, Intake
Part Number: 13711-0A010
$13.03 MSRP: $18.22
You Save: $5.19 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (L)
- Replaced by: 13711-20020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2008 Toyota Solara | SE, SLE | 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 3MZFE; 1MZFE, 3MZFE; MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, MCV31L-GCAGKA, MCV31L-GCANKA, MCV31L-GKAGKA, MCV31L-GKANKA
View related parts
Toyota Solara Valve, Intake
Part Number: 13711-03020
$13.16 MSRP: $18.39
You Save: $5.23 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve, Valve
- Manufacturer Note: (L)
- Replaces: 13711-74080
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2002 Toyota Solara | 4 Cyl 2.2L | 5SFE; 5SFE; SXV20L-GCMNKA, SXV20L-GCPNKA, SXV20L-GCPNKK, SXV20L-GKPNKA
View related parts
Toyota Solara Valve, Intake
Part Number: 13711-20020
$13.03 MSRP: $18.22
You Save: $5.19 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Intake Valve
- Manufacturer Note: (J)
- Replaces: 13711-0A010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1999-2008 Toyota Solara | SE, SLE | 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 3MZFE; 1MZFE, 3MZFE; MCV20L-GCMNKA, MCV20L-GCMNKK, MCV20L-GCPNKA, MCV20L-GCPNKK, MCV20L-GKPNKA, MCV20L-GKPNKK, MCV31L-GCAGKA, MCV31L-GCANKA, MCV31L-GKAGKA, MCV31L-GKANKA

Toyota Solara Intake Valve

The Intake Valve in Toyota Solara s is very vital in the economic and efficient engine operation as it controls the amounts of air and fuel required for burn. When these valves fail, the engine power is therefore brought down and combustion operation is affected. For outright replacement of damaged intake valves, special tools such as the valve spring remover, compressor etc are needed. This includes compressing the valve spring, taking out the retainer clips and fitting the new valve without the ruining the guide or the seal. To avoid situations when the valve can become loose, proper installation is necessary for assisting the efficient work of the engine.

If you are in demand for superior quality and affordable OEM Toyota Solara Intake Valve, then shop with us! We own a wide range of the reduced-priced genuine Toyota Solara Intake Valve. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Solara Intake Valve Parts Questions & Experts Answers

Valve, Intake
13711-0H010
Q: How to service valves, valve seats, and valve guides on Toyota Solara?
A: Due to the intricate nature of the task and the specific tools and equipment required, a professional should handle the servicing of the valves, valve seats, and valve guides, often referred to as a valve job. A home mechanic can undertake the removal and disassembly of the head(s), perform the initial cleaning and inspection, then reassemble and transport them to a dealer service department or an automotive machine shop for the actual service work. This inspection allows the mechanic to understand the condition of the head(s) and valvetrain components and to know what work and new parts are needed when dealing with an automotive machine shop. The dealer service department or automotive machine shop will then remove the valves and springs, recondition or replace the valves and valve seats, recondition the valve guides, check and replace the valve springs, spring retainers and keepers (if necessary), replace the valve seals with new ones, reassemble the valve components and ensure the installed spring height is correct. They will also resurface the Cylinder Head gasket surface if it's warped. After the valve job has been professionally done, the head(s) will be in a condition similar to new. When the heads are returned, they should be cleaned again before installation on the engine to remove any remaining metal particles and abrasive grit from the valve service or head resurfacing operations. If available, use compressed air to blow out all the oil holes and passages.