×
- Live Chat
- 1-888-905-9199
My Garage
My Account
Cart
Genuine Toyota T100 Ignition Lock Cylinder
Ignition Key Lock Cylinder- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Ignition Lock Cylinders found
Toyota T100 Ignition Lock Cylinder
If you are in demand for superior quality and affordable OEM Toyota T100 Ignition Lock Cylinder, then shop with us! We own a wide range of the reduced-priced genuine Toyota T100 Ignition Lock Cylinder. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.
Toyota T100 Ignition Lock Cylinder Parts Questions & Experts Answers
- Q: How do you check and replace the ignition switch and Ignition Lock Cylinder on Toyota T100?A: Disconnect the cable from the negative terminal of the battery, ensuring that the lockout feature of the anti-theft audio system is turned off if applicable. Disable the airbag system, then remove the steering wheel and the steering column covers. Pry off the starter switch bezel and unplug the electrical connectors from the ignition switch. For T100 models, use an ohmmeter to check the continuity of the switch terminals: there should be no continuity with the key in LOCK, continuity between terminals 2 and 3 in ACC, continuity between terminals 1, 2, and 3 as well as between terminals 7 and 8 in ON, and continuity between terminals 1, 3, and 6 as well as between terminals 7 and 8 in START. Check the continuity of the key unlock warning switch with the switch OFF and the key removed, ensuring there is no continuity, then insert the key and turn the switch ON to confirm continuity between terminals 4 and 5. If the ignition switch does not operate, replace it. For Tacoma and 4Runner models, perform a similar continuity check: no continuity in LOCK, continuity between terminals 2 and 3 in ACC, continuity between terminals 2, 3, and 4 as well as between terminals 6 and 7 in ON, and continuity between terminals 1, 2, and 4 as well as between terminals 6, 7, and 8 in START. Again, check the key unlock warning switch for continuity as previously described, and replace the ignition switch if it does not operate. For replacement, insert the key in the ignition switch Ignition Lock Cylinder and turn it to ACC, then insert a small screwdriver into the hole in the bottom of the ignition switch casting to press the release button while pulling the lock cylinder straight out. Installation is the reverse of removal.
