Toyota 83320-07010 Gage Assy, Fuel Sender

You can Select Your Vehicle to check if 83320-07010 fits your vehicle.

Relieve the fuel system pressure, then disconnect the negative battery cable. Remove the fuel pump/fuel level sending unit assembly from the fuel tank. Carefully angle the sending unit out of the opening without damaging the fuel level float located at the bottom of the assembly. Disconnect the electrical connector from the sending unit. Pry the sending unit from the retaining clips. Disconnect the electrical connector and pry the fuel level sending unit from the clips and separate it from the assembly. Installation is the reverse of removal.

For four-cylinder models, disconnect the fuel pump electrical connector from the fuel suction plate. Use needle-nose pliers to remove the spring E-clip, disengage suction support mounting clips, and separate the band bracket from the fuel filter assembly.

For four-cylinder models, disconnect the fuel pump electrical connector from the fuel suction plate. Use needle-nose pliers to remove the spring E-clip, disengage suction support mounting clips, and separate the band bracket from the fuel filter assembly.

Carefully angle the sending unit out of the opening without damaging the fuel level float located at the bottom of the assembly.