Toyota 81130-52611 Passenger Side Headlight Assembly

You can Select Your Vehicle to check if 81130-52611 fits your vehicle.

All models are equipped with an electrical vertical beam adjuster unit, which can be used to adjust the headlight beam to compensate for the relevant load the car is carrying. An adjuster switch is provided on the facia.

1. Open the tailgate and unclip the trim panel from the back of the light unit for access to the bulbholders. 2. Disconnect the wiring plug from the bulbholder. 3. Support the light from outside, then unscrew and remove the central nut from the back of the light. 4. Remove the light from the car; it may be stuck on the body seal. 5. Refitting is a reversal of removal. Check the condition of the body seal before fitting the light; if necessary, fit a new one to prevent water leaks.