How to remove and install a crankshaft pulley on Four cylinder engine on 2007 through 2015 Toyota Avalon?

First of all, disconnect the negative battery terminal and remove the drivebelt. Next, loosen the lug nuts on the right front wheel, raise the vehicle, and support it on jack stands. Also, remove the wheel and right splash shield. Remove the crankshaft bolt using a breaker bar. To install, align the pulley with the Woodruff key and press it onto the crankshaft using a damper tool. Installation is the reverse of removal.

How to remove and install a crankshaft pulley on Four cylinder engine on 2002 through 2006 Toyota Avalon?

Detach the cable from the negative terminal of the battery. Remove the drive belt. Unbolt the bracket from the engine movement control rod. With the parking brake applied and the shifter in Park (automatic) or in gear (manual), loosen the lug nuts from the right front wheel, then raise the front of the vehicle and support it securely on jackstands. Remove the right front wheel and the right splash shield from the wheel well. Remove the bolt from the front of the crankshaft. A breaker bar will probably be necessary since the bolt is very tight. Using a puller that bolts to the crankshaft hub, remove the crankshaft pulley from the crankshaft. Note: Depending on the type of puller you have, it may be necessary to support the engine from above; remove the right side engine mount and lower the engine to gain sufficient clearance to use the puller. To install the crankshaft pulley, slide the pulley onto the crankshaft as far as it will slide on, then use a vibration damper installation tool to press the pulley onto the crankshaft. Note that the slot (keyway) in the hub must be aligned with the Woodruff key in the end of the crankshaft and that the crankshaft bolt can also be used to press the crankshaft pulley into position. Tighten the crankshaft bolt. The remaining installation steps are the reverse of removal.

Genuine Toyota Avalon Crankshaft Pulley

Crankshaft Pulley Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Crankshaft Pulleys found

View related parts
Toyota Avalon Pulley, Crankshaft Timing
Part Number: 13521-20020
$69.69 MSRP: $98.24
You Save: $28.55 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear, Timing Gear Set
- Manufacturer Note: (J)
- Replaces: 13521-0A010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCX10L-AEPGKA, 1MZFE; MCX20L-AEPGKA, MCX10L-AEPGKK, MCX10L-AEPNKA, MCX10L-AEPNKK, MCX10L-AESGKA, MCX10L-AESGKK, MCX10L-AESNKA, MCX10L-AESNKK, MCX20L-AEPGKA, MCX20L-AEPGKK, MCX20L-AEPNKA, MCX20L-AEPNKK, MCX20L-AESGKA, MCX20L-AESNKA
View related parts
Toyota Avalon Gear Or Sprocket, Crankshaft Timing
Part Number: 13521-31041
$27.16 MSRP: $37.96
You Save: $10.80 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (J)
- Replaces: 13521-31040
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2008 Toyota Avalon | Limited, XL, XLS | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSX30L-AEAGKA, GSX30L-AEANKA, GSX30L-AEAPKA, GSX30L-AETGKA, GSX30L-AETNKA, GSX30L-AETPKA
View related parts
Toyota Avalon PULLEY, Crankshaft
Part Number: 13470-31030
$281.22 MSRP: $403.25
You Save: $122.03 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2018 Toyota Avalon | Limited, XL, XLE Premium, XLE Touring Or Touring, XLS | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSX30L-AEAGKA, GSX30L-AEANKA, GSX30L-AEAPKA, GSX30L-AETGKA, GSX30L-AETNKA, GSX30L-AETPKA, GSX40L-AETGKA, GSX40L-AETPKA, GSX40L-AETQKA
View related parts
Toyota Avalon SPROCKET, CRANKSHAFT
Part Number: 13521-0P020
$27.11 MSRP: $37.90
You Save: $10.79 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Or Sprocket, Crankshaft Timing; Crankshaft Gear
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Limited, Touring, XLE, XSE | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GSX50L-AEZGBA, GSX50L-AEZPBA, GSX50L-AEZQBA, GSX50L-AEZSBA
View related parts
Toyota Avalon PULLEY Assembly, CRANKSH
Part Number: 13470-0V020
$264.31 MSRP: $379.00
You Save: $114.69 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PULLEY, Crankshaft; Crankshaft Pulley, Pulley
- Replaces: 13470-0V030, 13470-36010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2018 Toyota Avalon | Limited, XLE | 4 Cyl 2.5L | 2ARFXE; 2ARFXE; AVX40L-AEXGBA, AVX40L-AEXPBA
View related parts
Toyota Avalon Gear Or Sprocket, Crankshaft Timing
Part Number: 13521-0P011
$27.16 MSRP: $37.96
You Save: $10.80 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear, Timing Gear
- Manufacturer Note: (L)
- Replaces: 13521-0P010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2018 Toyota Avalon | Limited, XL, XLE Premium, XLE Touring Or Touring, XLS | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSX30L-AEAGKA, GSX30L-AEANKA, GSX30L-AEAPKA, GSX30L-AETGKA, GSX30L-AETNKA, GSX30L-AETPKA, GSX40L-AETGKA, GSX40L-AETPKA, GSX40L-AETQKA
View related parts
Toyota Avalon PULLEY, Crankshaft
Part Number: 13408-0A010
$419.96 MSRP: $618.18
You Save: $198.22 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (L)
- Replaced by: 13408-20010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCX10L-AEPGKA, MCX10L-AEPGKK, MCX10L-AEPNKA, MCX10L-AEPNKK, MCX10L-AESGKA, MCX10L-AESGKK, MCX10L-AESNKA, MCX10L-AESNKK, MCX20L-AEPGKA, MCX20L-AEPGKK, MCX20L-AEPNKA, MCX20L-AEPNKK, MCX20L-AESGKA, MCX20L-AESNKA
View related parts
Toyota Avalon Gear Or Sprocket, Crankshaft Timing
Part Number: 13521-0P010
$27.16 MSRP: $37.96
You Save: $10.80 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (L)
- Replaced by: 13521-0P011
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2006-2007 Toyota Avalon | Limited, XL, XLS | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSX30L-AEAGKA, GSX30L-AEANKA, GSX30L-AEAPKA
View related parts
Toyota Avalon Gear Or Sprocket, Crankshaft Timing
Part Number: 13521-31040
$27.16 MSRP: $37.96
You Save: $10.80 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (J)
- Replaced by: 13521-31041
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2005-2007 Toyota Avalon | Limited, XL, XLS | 6 Cyl 3.5L | 2GRFE; 2GRFE; GSX30L-AEAGKA, GSX30L-AEANKA, GSX30L-AEAPKA
View related parts
Toyota Avalon PULLEY Assembly, CRANKSH
Part Number: 13470-25010
$345.66 MSRP: $508.81
You Save: $163.15 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2020-2022 Toyota Avalon | Limited, XLE | 4 Cyl 2.5L | A25AFKS; A25AFKS; AXXA55L-AEZGBA, AXXA55L-AEZPBA
View related parts
Toyota Avalon Pulley, Crankshaft Timing
Part Number: 13521-0A010
$69.69 MSRP: $98.24
You Save: $28.55 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: (L)
- Replaced by: 13521-20020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1995-2004 Toyota Avalon | XL, XLS | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCX10L-AEPGKA, MCX10L-AEPGKK, MCX10L-AEPNKA, MCX10L-AEPNKK, MCX10L-AESGKA, MCX10L-AESGKK, MCX10L-AESNKA, MCX10L-AESNKK, MCX20L-AEPGKA, MCX20L-AEPGKK, MCX20L-AEPNKA, MCX20L-AEPNKK, MCX20L-AESGKA, MCX20L-AESNKA
View related parts
Toyota Avalon SPROCKET, CRANKSHAFT
Part Number: 13521-F0010
$16.90 MSRP: $23.62
You Save: $6.72 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Gear
- Replaces: 13521-25010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Limited, XLE, XSE | 4 Cyl 2.5L | A25AFKS, A25AFXS; A25AFKS, A25AFXS; AXXA55L-AEZGBA, AXXA55L-AEZPBA, AXXH50L-AEXGBA, AXXH50L-AEXPBA, AXXH50L-AEXQBA, AXXH51L-AEXGBA, AXXH51L-AEXPBA, AXXH51L-AEXQBA
View related parts
Toyota Avalon PULLEY Assembly, CRANKSH
Part Number: 13470-25020
$176.42 MSRP: $252.98
You Save: $76.56 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Limited, XLE, XSE | 4 Cyl 2.5L | A25AFXS; A25AFXS; AXXH50L-AEXGBA, AXXH50L-AEXPBA, AXXH50L-AEXQBA, AXXH51L-AEXGBA, AXXH51L-AEXPBA, AXXH51L-AEXQBA
View related parts
Toyota Avalon PULLEY Assembly, CRANKSH
Part Number: 13470-36010
$264.31 MSRP: $379.00
You Save: $114.69 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PULLEY, Crankshaft
- Replaced by: 13470-0V020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2018 Toyota Avalon | Limited, XLE | 4 Cyl 2.5L | 2ARFXE; 2ARFXE; AVX40L-AEXGBA, AVX40L-AEXPBA
View related parts
Toyota Avalon PULLEY Assembly, CRANKSH
Part Number: 13470-31060
$295.02 MSRP: $423.05
You Save: $128.03 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PULLEY, Crankshaft; Crankshaft Pulley, Pulley
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2019-2022 Toyota Avalon | Limited, Touring, XLE, XSE | 6 Cyl 3.5L | 2GRFKS; 2GRFKS; GSX50L-AEZGBA, GSX50L-AEZPBA, GSX50L-AEZQBA, GSX50L-AEZSBA
View related parts
Toyota Avalon SPROCKET, CRANKSHAFT
Part Number: 13521-0V010
$16.87 MSRP: $23.59
You Save: $6.72 (29%)
Product Specifications
- Other Name: Gear Or Sprocket, Crankshaft Timing; Crankshaft Gear, Sprocket
- Replaces: 13521-36010, 13521-0V020
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2018 Toyota Avalon | Limited, XLE | 4 Cyl 2.5L | 2ARFXE; 2ARFXE; AVX40L-AEXGBA, AVX40L-AEXPBA
View related parts
Toyota Avalon SPROCKET, CRANKSHAFT
Part Number: 13521-36010
$16.87 MSRP: $23.59
You Save: $6.72 (29%)
Product Specifications
- Other Name: Gear Or Sprocket, Crankshaft Timing
- Replaced by: 13521-0V010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2013-2018 Toyota Avalon | Limited, XLE | 4 Cyl 2.5L | 2ARFXE; 2ARFXE; AVX40L-AEXGBA, AVX40L-AEXPBA

Toyota Avalon Crankshaft Pulley

Quite important in Toyota Avalon vehicles is the Crankshaft Pulley, which transmits power from the engine to components like the power steering pump, A/C compressor, and the alternator. While being bolted to the engine's crankshaft, it transmits torque and, at the same time, performs the role of a harmonic balancer to dampen the vibrations. Different models of Avalon Over Time have incorporated different styles of Crankshaft Pulley all with the intention of improving on the performances and efficiency. These pulleys may vary in the kind of material used in their construction and as a result vary in terms of their ability to transfer power and their performance in reducing vibrations. The primary goal remains consistent: for controlling the engine operation with references to maximize the engine performance as well as for controlling the smooth interaction with connected components.

If you are in demand for superior quality and affordable OEM Toyota Avalon Crankshaft Pulley, then shop with us! We own a wide range of the reduced-priced genuine Toyota Avalon Crankshaft Pulley. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Avalon Crankshaft Pulley Parts Questions & Experts Answers

Gear Or Sprocket, Crankshaft Timing
13521-31041
Q: How to remove and install a crankshaft pulley on Four cylinder engine on 2007 through 2015 Toyota Avalon?
A: First of all, disconnect the negative battery terminal and remove the drivebelt. Next, loosen the lug nuts on the right front wheel, raise the vehicle, and support it on jack stands. Also, remove the wheel and right splash shield. Remove the crankshaft bolt using a breaker bar. To install, align the pulley with the Woodruff key and press it onto the crankshaft using a damper tool. Installation is the reverse of removal.
PULLEY, Crankshaft
13470-31030
Q: How to remove and install a crankshaft pulley on Four cylinder engine on 2002 through 2006 Toyota Avalon?
A: Detach the cable from the negative terminal of the battery. Remove the drive belt. Unbolt the bracket from the engine movement control rod. With the parking brake applied and the shifter in Park (automatic) or in gear (manual), loosen the lug nuts from the right front wheel, then raise the front of the vehicle and support it securely on jackstands. Remove the right front wheel and the right splash shield from the wheel well. Remove the bolt from the front of the crankshaft. A breaker bar will probably be necessary since the bolt is very tight. Using a puller that bolts to the crankshaft hub, remove the crankshaft pulley from the crankshaft. Note: Depending on the type of puller you have, it may be necessary to support the engine from above; remove the right side engine mount and lower the engine to gain sufficient clearance to use the puller. To install the crankshaft pulley, slide the pulley onto the crankshaft as far as it will slide on, then use a vibration damper installation tool to press the pulley onto the crankshaft. Note that the slot (keyway) in the hub must be aligned with the Woodruff key in the end of the crankshaft and that the crankshaft bolt can also be used to press the crankshaft pulley into position. Tighten the crankshaft bolt. The remaining installation steps are the reverse of removal.