How to replace the Fuel Filter on Toyota Sienna?

Relieve the fuel system pressure. Note: 2001 and later models do not have a separate serviceable fuel filter. These models have a filter in the fuel tank which is designed to last for 100,000 miles or more. Disconnect the negative battery cable. If necessary for access, remove the air cleaner assembly and evaporative canister. Unscrew the banjo bolt from the top of the filter and disconnect the fitting from the filter. Disconnect the fuel line fitting at the top and bottom of the fuel filter (1998 through 2000 models only). Loosen the fitting at the bottom of the fuel filter with a flare nut wrench while holding the filter canister from turning with an open-end wrench. Remove the bracket bolts from the inner fender panel and remove the filter and bracket assembly. Note that the inlet and outlet pipes are clearly labeled on their respective ends of the filter and that the flanged end of the filter faces down. Make sure the new filter is installed so that it's facing the proper direction as noted above. When correctly installed, the filter should be fitted so that the outlet faces up and the inlet faces down. Connect the inlet fitting to the bottom of the filter, then mount the bracket to the inner fender panel, tightening the bolts securely. Now tighten the inlet fitting securely. Connect the outlet fitting to the top of the filter, using new sealing washers on either side of the fitting. Tighten the banjo bolt to the torque. The remainder of installation is the reverse of the removal procedure.

Genuine Toyota Sienna Fuel Filter

Gas Filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fuel Filters found

View related parts
Toyota Sienna Fuel Filter(For Fuel Tank)
Part Number: 23300-74280
$26.38 MSRP: $36.88
You Save: $10.50 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Fuel(For Fuel Tank); Filter, Fuel Filter
- Comment: (FOR FUEL TANK)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2001 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
View related parts
Toyota Sienna Fuel Filter(For Fuel Tank)
Part Number: 23300-0D010
$35.38 MSRP: $49.46
You Save: $14.08 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Fuel(For Fuel Tank); Fuel Filter
- Comment: (FOR FUEL TANK)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 2000-2003 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
View related parts
Toyota Sienna Fuel Filter Pump
Part Number: 23217-03030
$11.70 MSRP: $16.35
You Save: $4.65 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter, Fuel Pump
- Manufacturer Note: TYPE A:REFER TO ILLUSTRATION
- Replaced by: 23217-0F010
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2003 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK
View related parts
Toyota Sienna Fuel Filter(For Efi)
Part Number: 23300-29065
$29.75 MSRP: $41.59
You Save: $11.84 (29%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Filter, Fuel(For Efi); Fuel Filter
- Comment: (FOR EFI)
- Warranty: This genuine part is guaranteed by Toyota's factory warranty.
Fits the following Vehicles:
- 1998-2001 Toyota Sienna | CE, LE | 6 Cyl 3.0L | 1MZFE; 1MZFE; MCL10L-GFSDKA, MCL10L-GFSDKK, MCL10L-GFSGKA, MCL10L-GFSGKK, MCL10L-PFSDKA, MCL10L-PFSDKK, MCL10L-PFSGKA, MCL10L-PFSGKK, MCL10L-SESDKA, MCL10L-SESDKK

Toyota Sienna Fuel Filter

Explaining its functions, the Fuel Filter is one of the components in Toyota Sienna which is used to protect the engine against the impurities such as dirt, rust and even water which harm the other components and affect their performance. Usually installed between the fuel tank and engine, usually as a component of a fuel injection system the filter stops dangerous particles with the help of its paper based filter cartridges known as pleated ones. This is required to avoid blockage and to ascertain that clean flow of fuel is received by the engine which enhance its performance. A diesel engine can have bowl like filters which allow water to be separated from the diesel to avoid system damage. The Fuel Filter when preserved by Toyota Sienna owners will help them safeguard the engine and guarantee the optimal performance for the car's reliability.

If you are in demand for superior quality and affordable OEM Toyota Sienna Fuel Filter, then shop with us! We own a wide range of the reduced-priced genuine Toyota Sienna Fuel Filter. You can purchase in confidence as all parts come with a manufacturer's warranty. Any issues with our products? No need to worry as we have a hassle-free return policy to guide you every step of the way.

Toyota Sienna Fuel Filter Parts Questions & Experts Answers

Fuel Filter(For Fuel Tank)
23300-0D010
Q: How to replace the Fuel Filter on Toyota Sienna?
A: Relieve the fuel system pressure. Note: 2001 and later models do not have a separate serviceable fuel filter. These models have a filter in the fuel tank which is designed to last for 100,000 miles or more. Disconnect the negative battery cable. If necessary for access, remove the air cleaner assembly and evaporative canister. Unscrew the banjo bolt from the top of the filter and disconnect the fitting from the filter. Disconnect the fuel line fitting at the top and bottom of the fuel filter (1998 through 2000 models only). Loosen the fitting at the bottom of the fuel filter with a flare nut wrench while holding the filter canister from turning with an open-end wrench. Remove the bracket bolts from the inner fender panel and remove the filter and bracket assembly. Note that the inlet and outlet pipes are clearly labeled on their respective ends of the filter and that the flanged end of the filter faces down. Make sure the new filter is installed so that it's facing the proper direction as noted above. When correctly installed, the filter should be fitted so that the outlet faces up and the inlet faces down. Connect the inlet fitting to the bottom of the filter, then mount the bracket to the inner fender panel, tightening the bolts securely. Now tighten the inlet fitting securely. Connect the outlet fitting to the top of the filter, using new sealing washers on either side of the fitting. Tighten the banjo bolt to the torque. The remainder of installation is the reverse of the removal procedure.